How To: Add A LED Shadow Line To A Miter Saw (CHEAP!)
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2017
- In this video I go through the process of adding an inexpensive LED light to my Bosch GCM12SD Miter saw. This little upgrade makes a HUGE difference in the use of this saw. This is a great option for older saws as well, once you use a saw with a shadow line you'll never go back!
This process is somewhat universal to all miter saws, you'll just need to use a different method for attaching the LED to the saw hood, in the past I have used hot glue and gaffers tape to keep the LED to on the saw hood, and its held up great.
Want to help support Make Everything? Check out our Patreon page!
/ makeeverything
If you have any questions, leave them in the comments! Enjoy!
Below are some links to tools I used in this project.
As an Amazon Associate I earn from qualifying purchases.
Led light:
amzn.to/2FS6Qlk
Thank you to Pferd abrasives for supporting my shop and my channel. For links to some of the grinding discs I use most see below:
As an Amazon Associate I earn from qualifying purchases.
Flap disc:
amzn.to/2Myxozi
Inside corner disc (AMAZING):
amzn.to/2WoYM2q
Wire Wheel:
amzn.to/31k15rx
Thanks for watching! Be careful, know the limits of your skills and your tools! Don't try this stuff at home!
Like and Subscribe for more videos and check out our Instagram
/ makeeverythingshop
To help support Make Everything and this channel become a Patron:
/ makeeverything
For Make Everything T-shirts, hats and other products check out our website:
makeeverythingshop.com/store/
We teach classes in woodworking and welding here at the shop, if your interested see the current schedule here.
makeeverythingshop.com/events/
For PDFs of some of our project check out our profile on Instructables:
www.instructables.com/member/...
Below are some links to tools I use in the shop on a daily basis.
As an Amazon Associate I earn from qualifying purchases.
Bosch Miter Saw ( My Favorite miter saw)
amzn.to/2BeBulk
Sawstop Table Saw:
amzn.to/2DuAYVy
Wen Tabletop Metalcutting Bandsaw
amzn.to/2DrS7zf
Articulated Vise:
amzn.to/2FXKw9V
Bosch Portable Bandsaw ( 18V)
amzn.to/2mQdUq4
Porter Cable Restorer:
amzn.to/2BeWrfU
Lincoln 120V Welder ( good for a home shop)
amzn.to/2Dly6qV
The Camera I use:
amzn.to/2DqG325
The Tripod I use:
amzn.to/2rnEqfO
After seeing this video, I just taped a cheap led magnetic pocket flashlight (was on sale from haborfreight for under $5) to my miter saw and works great. Just need to change the 3xaaa batteries periodically. Amazing change in using it. Thanks so much for the idea!!!
Great mod. It makes lining up the kerf so much quicker. I used a somewhat different sewing machine light, but this guide makes it super easy to follow.
I followed your instructions exactly and damn... works perfectly! In fact it’s SO perfect I’m kind of astonished they don’t have something like this standard. It’s so much better than the junky lasers that are not accurate and possibly dangerous.
Bravo!
This channel is great!
I bought the same light but the bulbous light part wasn't going to fit under the guard of my old Dewalt chop miter saw. I found out though I could disassemble the bulb part and end up with a nice flat LED circuit board. This fit fine under the guard. I cinched it down with a cable tie. This whole shadow light concept works great. I am glad I could mod my old saw for it. Thank You!
Love this idea. Never seen it before but answering a big need in the shop to line up cuts with less trial and error. Thanks for sharing!
One of those brilliant ideas. Thanks. Cheers, David
That had to be the BEST tip I've ever gotten from TH-cam! I thought I'd tell you that my 12 inch Bosch saw (GCMSD.... which I thought was identical to yours), it turns out it wasn't..... it did not have that black plastic removable piece. I just drilled a hole in the back of the metal raised part and ran the wire thru and it worked great. One thing I did different was to NOT open up the housing at the bottom of the light but instead take a couple of pliers and twisted the gooseneck open to access the wires inside. I cut off a couple of inches of the metal gooseneck and extended the wires that way. Very easy! Thanks again for a great idea.
Great mod, just did it, light was only $13 now on Amazon. Pretty straight forward thanks to your video. Thanks!
Chris. I was skeptical I could pull it off. But for $9 on amazon I bought 2 lights. Not only did i pull it off ... THANK YOU!... I wired it to the saw power side of the switch and use the common. Now I have 1 plug in with the saw, Light / guide that is ON/OFF when the saw is plugged in... AND and AWESOME saw line thanks to YOU!!!! GREAT IDEA.
I finished installing mine yesterday using a 12" gooseneck light. There was enough wire inside to do a splice and is working flawlessly. There was also enough material in the black cover to grind away and reinstall all 4 screws. Just used it a few times today and perfect lineup. Thanks for posting this!
What is a 12" gooseneck light?
Chris, watching your videos is a real pleasure. So much good information!
Not gonna lie, probably the easiest and best mod for any miterbox... Handsdown! Nicely done sir! Thanks for sharing!!!
Great video. I have the DeWalt with that shadowline. It works way better than the lasers I've tried. My shadow line doesn't show up real well in bright sunlight but even casting a shadow on the saw helps
Great mod! I had seen someone else using the led light and thought what a great idea. You know exactly where the blade is going to cut. will be trying to put one on my miter
Why are some of the simplest fixes so awesome to see? That's fantastic, nice job! Subscribed!
Hi Chris, I just bought a GCM12SD last winter and the blade shroud does not have a black plastic cap like the one you modified for your version of the 12” axial glide saw. No matter though, I used your idea and modified the plastic housing containing the LED board instead to give me more clearance when the blade guard rotates over the LED housing. I hot glued EVERYTHING (even LED housing) and I am really impressed with your fix to add a shadow line to the saw kerf! I have to admit it’s pure GENIUS on your part! Thank you very much for sharing this with the community. P.S.- I was never a big fan of hot glue until this project and now I use it more often then of epoxy. I think this an amazing saw and it’s even more precise with addition of your shadow line solution!
Thanks for sharing! Another job to add to this weekend 👍
I followed your install but I changed it up a little. I installed the switch and driver in the handle. Turned out pretty clean. Thanks for the video, very informative. I would attach a picture but don’t know how.
Thanks Chris, that is absolutely brilliant. (especially the light). That problem has been haunting me for years - it’s my next project. Colin
Thanks for this video. You saved me at least a hundred dollars. I was able to take the little power supply circuit board and fit it into the handle of my DeWalt miter saw and tapped the 110V input from there also. That way no extra plugs to plug in, and no wires showing at all. I did have to cut the LED board in half though, very easy to do with an abrasive dremel disk. Just had to solder a small jumper on that to power all the LEDs as they are wired in series.
I first watched this video when I got my Bosch saw a couple of months back and realized that paying over $500 for a saw doesn't get you a laser or anything. :( I finally made my next order to Amazon and received my sewing machine light. Time to go do the install now. Thanks for the great idea and instructions. We all go farther when we share these kinds of ideas! Happy Woodworking!
Been having trouble aligning my laser since day one. Gonna have a look at my saw tomorrow and see if that light will fit.
You're a genius
Brilliant - great idea! Not seen this anywhere else. Also a really good explanation of how you did it. I'll try this on mine - thank you
desreed1 thank you! Let me know if you have any questions I'd be happy to help! Good luck! It's worth it!!!
I have the same saw and have been looking for a laser guide for it. This is so much better....and cheaper. Great idea! And you now have a new subscriber.....
What an awesome idea bro. Using the housing intended for the laser as the housing for a superior product you thought of yourself. Well done Chris, I've also got this saw and the built in laser (which is housed in the black plastic housing you manipulated to suit your led, stopped working a few months ago. A replacement laser is around £70 (I now live in France but bought the saw when living in London a few years ago). So your idea seems way more practical and inexpensive. That's some really dynamic thinking on your behalf, nice one bro.
I just did your mod on my Bosch Glide Miter. Terrific! Great idea and I'm liking it. When I ordered the sewing machine LED they had other choices.....30 and 40 LED versions. All the same price. I was tempted to go with one of them, but was concerned that the dimensions of the light unit would be different. I will try this one out in the sun. If it's hard to see the line, I may upgrade. Can't go wrong for 10 bucks. Thanks
Been wanting to do this for years! Thanks for the video!
Fantastic! I just picked up a Bosch yesterday at an estate sale and was surprised that Bosch did not include something considering the retail cost of this puppy.
I believe I will do this on my ol' Hitachi also.
OMG! I’ve been wanting this for mine (Bosch axial) for 10years! Thank you for sharing this!
That is beyond brilliantly simple. Thanks.
Fantastic idea, and I have the same saw so this is going to be done by me as well.
You, my friend are a genius. I had the Dewalt with the shadow line, but sold it to get the Bosch, and the one thing I really miss is the shadow line. Not anymore. Thanks for posting this video.
which model dewalt did you have?
@@ginoasci2876 DSW780 comes standard with it ($600). The DSW779 ($400 for the same saw minus light) is able to install the upgrade kit but they stopped selling them.
Excellent idea, I installed it, works very well.
Thanks for share.
This is a great idea. I’ve been wondering how to do something like this for a metal cutoff saw. I kept having to cut big and sand to the line. It just took to long that way and was driving me crazy. Thank you
What a great idea I did this today after watching your video thanks next job is to install the remote starter for dust extractor thanks again keep up the good work Craig
Excellent idea and video , thanks for sharing. I'll be putting this on both my saws.
Great tip! The best I have already found on internet.
I was about to spend 80 dollars on a light for my dewalt, thank God this video came across
I purchased the dewalt dws 779 and I couldn’t spend the 110 bucks for their custom light conversion kit. I figured something like this could work, and I assumed someone already thought of this and I searched TH-cam and here it is. Great job!
110 dollars for a light? Jesus.
@@Germanicworldsnot just a light…it pretty much converts it to the same XPS light on the 780. I just installed mine and it’s great. It’s pricey, but it’s a clean install and there’s no external wiring or anything. Takes like 15 minutes to install.
Best USABLE hack I've seen on TH-cam to date. And of course it takes an ordinary man, with a shit load of common sense, to come up with this idea. I was contemplating getting a Lazer for my 12" miter, but not now. Not to mention saving a lot of money. Great video and great job. Consider me a subscriber. 2 THUMBS UP
I saw a friend of mine do this too, excited to add one to mine. I'm older and have a hard enough time seeing the cut line at times, especially if it's not bright out or working with darker materials.
I've seen mitre saws with 2 lasers now, 1 for each side of the blade. This idea is soooo much better than a laser or even the 2 lasers gimmick.
Chris, great meeting you at Jimmy’s this weekend. Excellent video. Looking forward to checking out more. Hope your puppy adventure went well.
Cool mod. Love the shadow line. You may want to think about adjusting your red kerf boards, they look like they are in the factory shipping position. It's really nice to have zero clearance on those.
I watch a lot of videos, this is up there with the best, what a brilliant idea, nice one mate I'll be doing this mod to my saw thank you
This is the greatest hack in woodworking ever! It's a good time to be alive lol :-)
Great. Now I have to figure out how to adapt this light, or something I can make myself, to my carbide metal crosscut saw. These use internal blade guides, so your method won’t work, unfortunately. But watching this has me thinking about ways to overcome that, so thanks for the inspiration.
The laser of my miter saw broke down, so I’m definitely gonna have a look if I can apply this idea. Great job, good tutorial. Tnx!
Very clever idea.Congratulations
I added the LED and it is as good as any laser. Thanks for posting this video.
Did this on my 12" Harbor Freight miter saw and it worked perfectly. The guard had plenty of clearance and the light I bought from Amazon was more than bright enough. I'm not sure it will show up in bright daylight but we'll see. Still, it's a great hack!!
That's a really clever idea. Very well done.
Just watched this again. Very helpful! Thanks!
Absolutely fabulous...thanks. Have to see if I can get it to work on my Dewalt Radial Miter. Love your other videos too. Thanks again,.
BRILLIANTLY OBVIOUS WHEN YOU KNOW .
THANKS A MILLION .TONY
Very nice idea. I found a very small laser line generator for the same price that I'm certain could create a line you could see without having to lower the saw down to the work piece (which would be my preference) but I'm unconvinced that it would be as brainlessly accurate as this over time, especially with different kerf width blades and vibration when the saw is running. It's worth noting for users of this saw that on the newest iteration the front guard is all one metal piece making this installation less practical.
I really wanted to get this exact saw but as soon as I used a DeWalt at work with the shadow line, it became essential. Thanks for the video. Now I can buy the Bosch and all is well in the world
I have a DW 708 Dewalt Radial Miter. Any suggestions on how you did yours?
Great idea. Thanks for sharing
That is a great mod! Thanks for sharing.
Great idea thx ordered 1 and will be installing it ASAP.
Mate! Excellent idea would have never thought about this.
NICE! Ive been debating to upgrade my miter saw and ive fallen in love with the Bosch 12 inch glider. The only thing that is keeping me from getting one is no option for shadow line. Im so used to my Flexvolt XPS that i almost went and got another one but saw your video today and now i kinda wanna try this mod. Thank you for sharing this how to!
fantastic. I've always wanted to get one of those led universal screw on light cause I've always though that's the only option. Love this cause you don't need the saw running which doesn't bother me but it not running is much better for lining up. Thanks
I am so doing this thanks so much! I have the same saw and I love it too.
BRILLIANT!....such an amazing mod!
I have 2 different folders I put this kind of videos on. I can't decide if this is incredible enough to go into the genius or belongs in the miter saw folder. Whatever, it is truly a brilliant innovation.
Great video. I have the same saw and I have been looking to add a laser but this works just as well.
I added 2 or those same lights to my mill about 4 years ago. Wired it some they come on with the power switch. I plan on replacing my 15 year old dewalt miter saw with this one. Think ill try this mod. Thanks for sharing.
I'll try it on my RYOBI. Greetings from Spain ;) Canary Islands to be exact
Wow! That is one hell of a modification...much better than the spinning factory Laser indicator.
Great idea! I used a battery powered book light and hot glue total time for installation under 5 minutes. Not bright enough for outside, but perfect for shop. Now to figure out how to add one to the table saw.
Great Idea!! I have the same saw and love it. I wished I went with the 10" version. because the 12 is a beast to move. I think I will be doing this upgrade
For what it's worth, the 10" is only 1lb lighter than the 12".
Dude! That is a sick modification
Installed the lamp last week. Tried it out today on the job site. Shockingly great results. Do you have any other tricks up your sleeve?
Thanks for that great idea .
This came as a feature on my DeWalt DWS780. At first I was like "Oh how nice - an LED to better see my work" - - then I actually took a look at the instructions for something else and saw its true purpose - and it is an amazing simple feature that does the job so very well.
George Gibeau we had a dws780 in my high school woodshop I used that thing for 4 years and thought it was just a work light it wasn’t even on 90% of the time because nobody knew it’s use lol
@@grantsdad177 A dewalt saw in a high school woodshop? That wouldn't last 5 seconds with the stuff we were doing in high school shop class. Must've been donated.
Paul Day what do you mean by that? that miter saw ran flawlessly all for every year I had shop class and kids abused the hell out of it but it always stayed true we actually had two but one wasn’t a sliding miter one of them was the teachers personal saw and he used it at job sites during the summers with no problems I personally love dewalt saws
Thanks for this one! I gotta do this to my Bosch.
That's a great idea, I have the same saw and need to do that.
That LED makes an amazing line, I wouldn't have guessed it does as well as a laser, I'm going to try it on my Ryobi 10"....
Cool build I've wanted to do this to my saws for awhile.
Good call not wiring it to the power supply of the saw!
Brilliant- no pun intended- absolutely one of the best tool hacks I’ve seen on YT. WHY didn’t Bosch do this in the first place? You’ve made a popular saw 5x more user and greenhorn friendly / much respect!
Probably because Dewalt has a patent on it?
Dewalt does it and they charge $200 for it >.< it's called XPS technology.
Bosch does have one it's on the European model not Imported here. I've tried to find the parts it replaces to top plastic piece at the end of the blade guard
@@georgebliss7674 Makita has it also. Are they paying Dewalt for the license?
@@XaeroR35, either that or Dewalt's patent ran out
Thank you! Great idea and great video.
That is very clever. Thanks for sharing.
Such a beautiful crips shadow on the wood. That's not a mod, it's an upgrade!
You just save me $600, as I was seriously considering replacing my old DW706 miter saw. Liked, subscribed, bought the light through your link.
replace your dewalt and get the BOSCH GCM12SD like this one, retro-fit an LED like this guy did or just get a red laser in the side that works great. This Bosch miter saw is really something. I returned my DeWalt after 10 months and bought this 12” Bosch, and it’s solid. No lateral movement when fully extended, super smooth action with adjustable tension, front controls, it’s heavy but it’s worth it.
The red LED light is not dangerous, it’s works great, or buy an LED that fits another saw onto this one if you prefer a shadow line.
I had a DeWalt and it wasn’t as accurate. None of them are like this saw. This is IT.
That’s pretty was pretty awesome I am going to try that with my Dewalt metal cutting chopsaw. Thanks for the video.
I have that same saw and I love the idea so I'm going to have to try that.
Great Scott! If you have any issues be sure to drop me a line and ill try and help you out.
Very helpful video. In fact, Craftsman radial arm saws came with a beautiful high power genius riving knife, anti-kickback pawl, blade guard, and incadescent light bulb inside the blade guard, on their early 1970's radial arm saws. I am not sure which model it was, but I got a $75 1978 model Craftsman radial arm saw and I purchased the blade guard with the "light bulb" and riving knife, and installed that onto my 1978 radial arm saw, and now it's SO nice, it is more precise and I can cut tiny pieces of wood with absolute laser precision, a lot safer than a large compound miter saw. The compound miter saw excels in making angled cuts on regular "normal" size materials. The radial arm saw excels in making highly precise cuts on very tiny, super thin, fragile, or hard to hold objects. The radial arm saw can cut a 1/2" wide cube of wood with effortless precision, without any need for a jig or sacrificial fence.
Great tutorial and a great video! Nice tip! :)
Brilliant. Thanks for sharing!
Brilliant idea mate!😊
Great idea. Going to do to my saws and get rid of the battery disc. Way better. Thank you.
thanks man!! Im gonna do that to my saw!
Nice idea, I`m trying this tommorow,will let you know.
Very Good Idea! Thanks man.
Ordered one of those LED lights from Amazon. Gonna convert my Ridgid 12" saw this weekend.
Great job! Excellent idea👍🏻
Great idea. Good job
GREAT THANKS BEEN LOOKING FOR THAT IDEA
Thank you for the video that was very good idea thanks for posting