How many amps u think that esc can handle. Specs for the mosfets on the mini q esc i have says 8.1 constant drain and i have a pn31t 130 im wanting to connect to it, what do you think?
As they run a 2s lipo normally I'd say its 8 - 12 amps as the cheaper wltoys aio board handles a pn racing 50t on 2s lipo (Close too 40 km/h without gearing it up higher with a larger pinion & modding the motor mount.) th-cam.com/video/NOdg1TZXdEQ/w-d-xo.html The pn racing 31t will be nuts on 2s even on the lowest gear ratio you can put on whatever car you are placing it in, though you might have too hop too the seperate micro esc rather then use a board like that for that motor. Got a mini 30a esc on it's way from banggood here myself too convert my mr01 too 2.4 ghz. (I'll give it a test on 2s lipo & stock motor perhaps in the gymnastics hall nearby me just too have space too drive it too top speed. As i have a pair of 2s lipos for a k989 1:28th scale car i bought for like 29 sek each I'll get plenty of speed for sure.) Though i might just move the servomotor + potentiometer over too my iwaver 04 (mini-z monster clone from like 2008 i think ? bought it that year on christmas new for 850 sek at the time.) accidentally mixed batteries between rechargable & regular ones & ended up burning the servo wiring, traded it away for a iwaver 01 which is a mini-z mr01 clone (something i regret doing years later.) as i probably could have taken it over too a neighbours house going hello can you solder these two wires or maybe extend them ? & it would have been completely fine. (Aluminium shock towers, ball bearings & a hot iwaver motor that i dont know which one it was too this day, but it was quick i can tell you that on 4x aaa batteries even on the stock gearing.) Just too have that running again for nostalgia + running that on a small 2s & fitting all the electronics will be easier on a monster truck probably heh. think I'm just missing servo motor + potentiometer,motor (which i can grab from the mr01 on these three items), motor pinion. (Think it's a 9t,10,11 12t i can use on the monster which i haven't found in any of my boxes or parts.) & then something like a pn racing 43t motor or possibly one of those closed endbell wltoys motors & run that on 2s lipo.
Looking to convert fwd mini z to brushless
How many amps u think that esc can handle. Specs for the mosfets on the mini q esc i have says 8.1 constant drain and i have a pn31t 130 im wanting to connect to it, what do you think?
To tell you the truth I'm not totally 100% for sure but I would say maybe 5 to 6 amps Max
As they run a 2s lipo normally I'd say its 8 - 12 amps as the cheaper wltoys aio board handles a pn racing 50t on 2s lipo
(Close too 40 km/h without gearing it up higher with a larger pinion & modding the motor mount.)
th-cam.com/video/NOdg1TZXdEQ/w-d-xo.html
The pn racing 31t will be nuts on 2s even on the lowest gear ratio you can put on whatever car you are placing it in, though you might have too hop too the seperate micro esc rather then use a board like that for that motor.
Got a mini 30a esc on it's way from banggood here myself too convert my mr01 too 2.4 ghz. (I'll give it a test on 2s lipo & stock motor perhaps in the gymnastics hall nearby me just too have space too drive it too top speed.
As i have a pair of 2s lipos for a k989 1:28th scale car i bought for like 29 sek each I'll get plenty of speed for sure.)
Though i might just move the servomotor + potentiometer over too my iwaver 04 (mini-z monster clone from like 2008 i think ? bought it that year on christmas new for 850 sek at the time.) accidentally mixed batteries between rechargable & regular ones & ended up burning the servo wiring, traded it away for a iwaver 01 which is a mini-z mr01 clone (something i regret doing years later.) as i probably could have taken it over too a neighbours house going hello can you solder these two wires or maybe extend them ? & it would have been completely fine.
(Aluminium shock towers, ball bearings & a hot iwaver motor that i dont know which one it was too this day, but it was quick i can tell you that on 4x aaa batteries even on the stock gearing.)
Just too have that running again for nostalgia + running that on a small 2s & fitting all the electronics will be easier on a monster truck probably heh.
think I'm just missing servo motor + potentiometer,motor (which i can grab from the mr01 on these three items), motor pinion.
(Think it's a 9t,10,11 12t i can use on the monster which i haven't found in any of my boxes or parts.)
& then something like a pn racing 43t motor or possibly one of those closed endbell wltoys motors & run that on 2s lipo.