Extremely useful information! Got a RAM Promaster. I just had a bad engine mount diagnosis from my trusted local mechanic on my Promaster van. Huge relief as I thought the noises were coming from inside the engine!
I have a 2006 sienna and I have a clunk sound every time I accelerate and sometimes when I break that could be the motor mount? I replaced the whole dry train. Everything is brand new except the motor mounts.
I've a 1990 Corolla and it drives good but, when I'm accelerating it feels normal and when I stop at a red light it starts shaking/vibrating. I have to put it on neutral and the vibration of the dashboard stops once it's on neutral. Do you think my car has a bad engine mount?🤔
I have a 2008 ford focus i was doing repair for the inner front axel boot and the part that is supposed to be covered is slightly touching a part of the suspension or frame idk but its a big enough of a problem that im not able to put the boot on
Oh I think I definitely need a engine mount replaced but I also I’m hearing like this deafening vibration in my car every couple of minutes while driving at any speed but at a low speed you can hear it the loudest in the car but it’s deafening like if you’re sitting in the car it Makes you want to roll down the windows so you can hear something else if that makes sense and I don’t know what it is and every mechanic I go to doesn’t know what it is either but it’s deafening though like when it makes that noise that’s all you hear from the inside
This sounds exactly like what I have …my car just hit 100k miles Honda accord and there’s this loud vibration noise that comes and then goes away at slow speeds
My kia sportage is making like grinding noise when you come to stop. If you Rev it up noise is going and I can see my Engine kind of move when you put it on drive or reverse.
My Chevy cruze does this when my car is in drive or reverse with the air or heat on but no noise when air and heat is off it runs fine what would that be?
I have a Honda civic Ex 2012..I recently had all the mounts changed and now when I'm on idle , the engine is louder , it's louder when I'm accelerating over 70 too. Before I didn't really hear anything as bad as it is now
If you're using aftermarket mounts, they tend to do that. For Honda/Acura, you have to use OEM mounts 100% for fluid filled mounts. You may get away with aftermarket rubber mounts.
I have a 2002 ford f-150 xlt 5.4L triton v8 and it makes a buzzing noise in the back of the engine bay near the passenger side and I think it’s either a hose or a motor Mount not too sure tho if anyone has any information it would be appreciated
I reckon it can cause damage to your manual gearbox , I have had a bad shift issue into 3rd gear I have replaced the clutch master and slave cylinders out with new ones and still get crunching in 3rd . I think it's my engine and gearbox mount's.
Extremely useful information! Got a RAM Promaster. I just had a bad engine mount diagnosis from my trusted local mechanic on my Promaster van. Huge relief as I thought the noises were coming from inside the engine!
Wow thank you! Had all the symptoms and yes those mounts are no longer rubber and they are cracked.
Very useful info! I have a 2013 Honda Civic that vibrates more like when going up a hill, not so much at highway speed.
Useful information! A refresher is never a bad idea
weird timing because I've just found out I have bad motor mounts LOL
It’s because TH-cam is watching you
Ong
Very interesting and helpful information. Can you make a video of pros and cons from using starting fluid? Thanks
Useful Info...
My steering wheel Vibrate on hard acceleration. Kindly advise.
Tnk u
Dude everything you say is the truth! I Appreciate you.😎
Thank you very much, short sharp and to the point perfect ❤
I have a 2006 sienna and I have a clunk sound every time I accelerate and sometimes when I break that could be the motor mount? I replaced the whole dry train. Everything is brand new except the motor mounts.
I've a 1990 Corolla and it drives good but, when I'm accelerating it feels normal and when I stop at a red light it starts shaking/vibrating. I have to put it on neutral and the vibration of the dashboard stops once it's on neutral. Do you think my car has a bad engine mount?🤔
Vacuum leaks
@@davekleiboeker4614explainn
I have the same issue. Did you figure out what the issue was?
I have a 2010 RAV4 when driving cruising between 40 and 60 it makes a very awful Reanding sound. What could that be?
I have a 2008 ford focus i was doing repair for the inner front axel boot and the part that is supposed to be covered is slightly touching a part of the suspension or frame idk but its a big enough of a problem that im not able to put the boot on
Oh I think I definitely need a engine mount replaced but I also I’m hearing like this deafening vibration in my car every couple of minutes while driving at any speed but at a low speed you can hear it the loudest in the car but it’s deafening like if you’re sitting in the car it Makes you want to roll down the windows so you can hear something else if that makes sense and I don’t know what it is and every mechanic I go to doesn’t know what it is either but it’s deafening though like when it makes that noise that’s all you hear from the inside
Check if the muffler is blown
This sounds exactly like what I have …my car just hit 100k miles Honda accord and there’s this loud vibration noise that comes and then goes away at slow speeds
@@everaldwhittle7762 I just ended up getting a new car tbh but I wonder if that may have been what it was
@@ESBEAUTII if you’re still paying on it, I would just trade it in if I were you
What if we change engine and gear mounts ,spatk plugs ,coilsnare ok and still vibration when put gear on Drive or Reverse !!!
What else remaning?
My kia sportage is making like grinding noise when you come to stop. If you Rev it up noise is going and I can see my Engine kind of move when you put it on drive or reverse.
by any chance did you find out what it was?!
Your mounts are done. Maybe the underneath one ☝️
My Chevy cruze does this when my car is in drive or reverse with the air or heat on but no noise when air and heat is off it runs fine what would that be?
My Camry does that too did you find out ?
@@Joseluyzs it was the front motor mount got one no more issues
What’s the average cost to get it done?
Dealer charged me 100
@@BluedupK818 oh wow. Dealership charged me 400
@@yourpurpose5548 I got only the uppper motor mount replaced.
I changed three torqe strut and front and bottom for 700$
@@ToastnednRoasted how’d you know the others needed replacements
I have a Honda civic Ex 2012..I recently had all the mounts changed and now when I'm on idle , the engine is louder , it's louder when I'm accelerating over 70 too. Before I didn't really hear anything as bad as it is now
If you're using aftermarket mounts, they tend to do that. For Honda/Acura, you have to use OEM mounts 100% for fluid filled mounts. You may get away with aftermarket rubber mounts.
If you have warranty take it back ASAP. Sounds like they missed something. Good luck. I have to do the same with my Toyota.
Great video 👍
Great video
I have a 2002 ford f-150 xlt 5.4L triton v8 and it makes a buzzing noise in the back of the engine bay near the passenger side and I think it’s either a hose or a motor Mount not too sure tho if anyone has any information it would be appreciated
Will it vibration in steeringwheel at 110km/h ?
If that's the only time you notice it, the first thing I would do is have your tires balanced and have them check for any bad belts along the treads.
Thank you
Do it cause the car to jump also?
Very helpful
My alternator went out put the car in the garage and now they’re telling me I have bad motor mounts
Does this potentially hurt my transmission?
Yes it can cause damage to the shift cables and maybe CV joints. It unlikely to cause damage to the transmission internally.
Exactly what’s happening to me breaking cv axle
@@savionbird2122 how much is that running you?
@@savionbird2122 what are the signs? I get a creeking noise when I change gears sometimes
I reckon it can cause damage to your manual gearbox , I have had a bad shift issue into 3rd gear I have replaced the clutch master and slave cylinders out with new ones and still get crunching in 3rd .
I think it's my engine and gearbox mount's.
Car will not pivot in turns at 60 miles hours
good data
Am just new here