The subframe bushings going bad also produce the same type of clunking I've observed. This is a critical inspection .Make sure that that subframe does not pull away from the frame. Could allow engine to drop.
Great Video! I really liked the zooming in on the problem with the circle around it, as it helped to view exactly what you were talking about. Suggestion--- If you had a bright neon colored skinny pointer (or any type of pointer but what I wrote above is what I think would work best), to point to the exact problem, it would help to see during the regular part of the video, BUT MAN OH MAN WOULD IT POP AND BE SO VERY CLEAR WHEN YOU DO THE ZOOM IN WITH THE CIRCLE AROUND IT TRICK!
Thank you! 2:57 am and my son just got to work and text me his car is making a cranking noise when he accelerates. I came to TH-cam to find the answer!! 🙏🙏🙏
I get clunking noise when I release the throttle, and not every time. Have no idea what it is. Changed the lower mount, the tie rod ends that where bad, the left CV axle (noise when tuening left under throttle, but turned out it is the right one which I did not change), no play in the suspension. Don't know... :I
She is right . I have learned that when refreshing a car when your going it another service life replace the mounts and bushings it’s makes a good darn difference
I love how she described the problem in detail. This is exactly what is going on with one of my cars. In drive and reverse it vibrates on stop and makes the bop sound on take off. I thought it was exhaust but mechanic said engine mount and i doubted him. Will be replacing it this week so hopefully problem will be solved. Thank you for this video!
+SylverSterling Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Hi! Is this my problem? My vehicle doesn’t vibrate , sometimes I don’t even feel it running. But I felt the thumping sensation when I was decelerating from 30mph at a traffic light. when braking it catches the rotors but then there’s a delay felt as if transmission slipping, or lagging brake but it’s similar to when accelerating post coasting/engine braking. Vehicle is clocked at 215k 2007 Avalon
I have a few questions. I hope you can help me. I have a 2006 ford five hundred it has the 3.0 engine in it. I I have had some trouble out of the motor it won't take gas when you press down on the gas. The gas pedal will only go up to about 3 on the on the tac omter it won't go any further it runs rough and will not. Change Gears what do you think is wrong with it. If you could help I sure would appreciate it I have worked on it for about a month off and on
I put my car in park at stoplights because when I come to a stop in drive, the engine pushes up against the cooling fan and grinds. My lower motor mount bolt snapped and stuck inside the engine, so the engine moves back and forth. I need to remove the snapped bolt.
threw many parts in mine finally found the problem it was inside the steering rack when i hit pot holes or gravel roads would clunk, would turn no problem no noise didnt make the typical sounds only inside and when bumpy roads, only had like15k miles but was in crash. good luck all great video sue
She’s awesome. I’ve trying to figure out a shutter in my town n country for a while but never thought to check the motor mounts. Started in cold weather n now it’s all the time however sporadic. First thing tomorrow morning. Thanks so much
I’ve been reading a lot about this regarding Honda. The price cost though just oof. My pockets are empty as is. But I also don’t wanna deal with a short term low cost replacement
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Like
i live her videos, she is so good and explains so well
Exactly the same I wanted to comment.
Beat me to it definitely her videos are the best!
The subframe bushings going bad also produce the same type of clunking I've observed.
This is a critical inspection .Make sure that that subframe does not pull away from the frame. Could allow engine to drop.
Just replaced mine after a crooked mechanic tried to tell me I needed a new transmission. I hate LIARS, I laughed in his face.
Brilliant camera and audio capture for the worn motor mount demo! This is a top notch tutorial.
I love when Sue and Andy have these types of videos uploaded...informative and right to the point. 👍🏼
No love for Len? 😮
Great Video!
I really liked the zooming in on the problem with the circle around it, as it helped to view exactly what you were talking about.
Suggestion--- If you had a bright neon colored skinny pointer (or any type of pointer but what I wrote above is what I think would work best), to point to the exact problem, it would help to see during the regular part of the video, BUT MAN OH MAN WOULD IT POP AND BE SO VERY CLEAR WHEN YOU DO THE ZOOM IN WITH THE CIRCLE AROUND IT TRICK!
Thank you! 2:57 am and my son just got to work and text me his car is making a cranking noise when he accelerates. I came to TH-cam to find the answer!! 🙏🙏🙏
I get clunking noise when I release the throttle, and not every time. Have no idea what it is. Changed the lower mount, the tie rod ends that where bad, the left CV axle (noise when tuening left under throttle, but turned out it is the right one which I did not change), no play in the suspension. Don't know... :I
Omg the throwing parts part, I’ve replaced my entire front suspension and subframe and now my mechanic is telling it’s the motor mount
Nothing worse than a clunky engine mount. Great video.
She is right . I have learned that when refreshing a car when your going it another service life replace the mounts and bushings it’s makes a good darn difference
🤔
Would a bad trans mount cause pulling under acceleration only. ?
@3:30 car is trying to do a wheelie. Yup, that's it. 👍
I love how she described the problem in detail. This is exactly what is going on with one of my cars. In drive and reverse it vibrates on stop and makes the bop sound on take off. I thought it was exhaust but mechanic said engine mount and i doubted him. Will be replacing it this week so hopefully problem will be solved. Thank you for this video!
+SylverSterling Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thanks
Hi! Is this my problem? My vehicle doesn’t vibrate , sometimes I don’t even feel it running. But I felt the thumping sensation when I was decelerating from 30mph at a traffic light. when braking it catches the rotors but then there’s a delay felt as if transmission slipping, or lagging brake but it’s similar to when accelerating post coasting/engine braking. Vehicle is clocked at 215k 2007 Avalon
I have a few questions. I hope you can help me. I have a 2006 ford five hundred it has the 3.0 engine in it. I I have had some trouble out of the motor it won't take gas when you press down on the gas. The gas pedal will only go up to about 3 on the on the tac omter it won't go any further it runs rough and will not. Change Gears what do you think is wrong with it. If you could help I sure would appreciate it I have worked on it for about a month off and on
Love this channel! And Holy Cow! Look at all that rust under there.
That's the northeast for you
I put my car in park at stoplights because when I come to a stop in drive, the engine pushes up against the cooling fan and grinds. My lower motor mount bolt snapped and stuck inside the engine, so the engine moves back and forth. I need to remove the snapped bolt.
threw many parts in mine finally found the problem it was inside the steering rack when i hit pot holes or gravel roads would clunk, would turn no problem no noise didnt make the typical sounds only inside and when bumpy roads, only had like15k miles but was in crash. good luck all great video sue
Sue how much for you to come change my motor mounts on my 5 cylinder Acura? Haha I'd love to be a customer of yours
She’s awesome. I’ve trying to figure out a shutter in my town n country for a while but never thought to check the motor mounts. Started in cold weather n now it’s all the time however sporadic. First thing tomorrow morning. Thanks so much
Wish all mechanics where like this good
Your the best💪💯👍🍻🍻🍻🍻
Nice 👍 good job halpfull video
How much do they cost to fix,?
Personally speaking from experience, I would only put OEM Honda motor mounts on my car.
I’ve been reading a lot about this regarding Honda. The price cost though just oof. My pockets are empty as is. But I also don’t wanna deal with a short term low cost replacement
Great video!! Thank you!
Very helpful
She knows her stuff! Thanks!
I love your new intro 🤣🤣🤣🤣
Thanks you sis it helped me so well ❤️🩹
You rock very helpful always fun watching your videos your the best. Belatabaks ridersofthethunderdome