Mofo RC PORTAL AXLE Kit for the SCX24 - Review, Install, Crawling & More!!
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In this video I review and install the V2 portal axle kit for the Axial SCX24 from Mofo RC. This is a solid brass kit with steel internals built for performance. It utilizes the stock axle housings, making for an easy installation after assembling the portals. The kit adds ~6-7mm of ground clearance and ~8mm of track width, as well as ~70g of weight! Check out the video to see these things in action.
Mofo RC portal kit: www.moforc.com...
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref... - discount code CapeCrawlers
$10 off any order $50 or more: www.fmshobby.c... - discount code Capecrawlers
10% off the FMS FCX24 Power Wagon: www.fmshobby.c... - code Capecrawler10%
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracin... - code CAPE10
5% off any Flubberstufferz products: flubberstuffer... - code Capecrawlers5
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
Close look at the kit: 2:36
Portal assembly: 6:00
First impressions on the rig: 10:48
Comparison with RCAWD portals: 12:19
Indoor course runs: 14:07
Outdoor crawler course runs: 19:47
Final thoughts: 22:53
I know it's a bit off the wall but could you do a fms k10/glacier 1/18 crawler build that would be super cool
Curious, did mofo stop selling these? I can’t find them on the website.
I’ve slowly been turning into a huge fan of the Mofo RC gear. This is awesome that you don’t need to buy the entire axle kit to do this. I might just have to grab this set to bolt onto my buggy
Nick at Mofo is one of the most innovative guys in the RC game I feel. He's doing great things over there!
This is wild, I can’t go a single week without new parts for these rigs coming out the support for scx24 is so nuts lol.
seriously, every time I consider an epic build, they come out with another game changer
The mini market is on fire!!
Hey Man! love your channel! Keep up the great work. I recently started my own RC Channel. Just picked up a Traxxas Hoss and a Traxxas TRX 4 Crawler to add to the collection! Happy Bashing!
Thank you! I subbed to your channel. Looking forward to seeing what you do with your trucks!
@@CapeCrawlers Ayyy thanks! got my first video up today with the new Hoss. And got the TRX4 out of the box. TAking it out tomorrow to my local crawler track for some fun!
When it comes to the kits the portal axles stick with r c all-wheel drive and mues two of the best fitting kits that I have found
The design to keep the C hubs is interesting, but with the pivot being so far offset from the wheels it looks odd with how much the wheels move forward/back when steering. Think I prefer the tighter design the FCX24 or TrailHunter have. I'm particularly liking the design on the T Hunter right now, great amount of steering lock!
I do dig the trail hunter/FMS portals. They’ve done a great job with those!
I still run mine to this day!.I bought mine first day release when he uploaded it on his site.. buttt at the time they weren’t this cheap damnn mmaannn. Haha.
hmmm, very interesting upgrade. Initially I would have thought the weight of them being so low would counter the increased ride height but I guess not based on the footage. They're a very good design though they look a lot cleaner and give a wider+higher ground clearance than portals with C-Hubs. I guess these would be ideal for a course that favors ground clearance rather than steep climbs, either way very well worth the price!
On a side note did you ever decide to move forward with a Discord? I'm not big on Discord but I am more inclined to use that than FB. It would be cool to chit chat with people that also love this channel! Your channel is growing fast, better to start early if you feel this is inevitable for the brand growth! Who knows, maybe we'll see some Cape Crawler products someday 😉
A course that favors ground clearance and wide gates! I’ll look into the discord. I haven’t started one yet, but you are right that I should jump on it now. I’m planning a website and merch launch by spring 👍🏻
You got that kit for $50 that ain’t bad compared to real brands but I got front and rear portal, axles, brass and steering links. Come with it for 57 bucks.
That’s it you have convinced me to buy the +4mm injora axles.
You wont be disappointed!
Wow, that's great it's affordable and a bolt on!!
Great kit! Lots of value for sure
Great video Adam, I think the portals should have bearings in them for longevity, just a thought
Agreed. But we’ll see how they hold up!
Had mine for several months now. No problems at all.
Great Video. any plans to compare this build with deadbolt comp build ?
it would be great to see two construction approaches on your track. and of course your opinions
When the comp build is done I’ll do a shootout I think. It would be very cool to see them go head to head!
Putting them on my AX24 now!! 🎉
Awesome! Enjoy!
One of my favorite videos
You need to do a video of the Mofo rc portals and the Rcawd portals!
now we need a portal kit for the trx4m
Yes we do!
Need these on my new AX24!
They're a great setup!
And really good price if I had to pick one I'd say the Muse is a lot nicer goes on without any hitches all the screws go and no problem with threads and they have a cv upgrade for the front
I’ll have to check out the Meus. A lot of folks have mentioned them!
So with RCAWD you can run CVD axles and with these dogbone only?
Yes that’s right. The rcawd come with CVD’s standard now.
awsome vid
Thanks for watching!
When I build my four wheel steer rig I did not expect the uphill and climbing loss I would take. Unfortunately I had to buy more weights for the front but I find it well worth it for that turning radius. I also like snaggletooth with the portals but I think there unneeded if you got big wheel.
The servo in the back is a big hit to the climbing ability. I think you’re right that I may be better putting some smaller, wider tires on this to best utilize the portals
yes yes love the look
The solid brass looks good!
I have these portals from RCAWD, but I bought the whole axles. After running them on my MT24, I'm not too impressed. They have a tendency to cause the steering to get stuck, which killed 3 servos in my rig. I'm going back to a straight axle as soon as I can afford the parts. Going to cost me around 150 to get it back up and running.
With all that said if you're wanting to have a monster truck, don't go the portal route like I tried. Maybe they are good for crawler but not for a monster truck.
Sorry to hear that! We stuck with straight axles on my sons MT build. Those big tires would be a lot of stress on the portals I can imagine.
I busted 2 dogbone axles with mine the first day. I really would like to see the kit include 2 entire axles that have a cv joint in them.
Completely agree. CVD's are a must with this setup I feel.
@Cape Crawlers I sent MofoRC asking for this a week or so ago. Think you could also make the suggestion? Hopefully, it will be moved up in priority if he sees there is the demand for it.
Sweet man 😎
Leeeeeetsssssss goooooooo!!!!! Thx you man
Thanks for watching!
Wish they would include a shaft to replace the dog bone axle I snapped three of them stock ones in less than a week. Waiting on cvds right now 👌
Me too. A CVD option would be a great upgrade
I came here just to see if you would put those O-rings in the right spot. I made the mistake and frustration kicked in after trying to figure out why my dog bones kept binding. Finally Nick came through and helped me out.
The only reason I knew where they went was because I watched Matt's video over on 2FMRC. Otherwise I would have been in the same situation you were!
Adam, I just ordered some wheels and a motor from injora, and do you know how long it takes for them to arrive?
Usually 10-12 business days
Awesome!
👍🏻👍🏻
You should put portal axles on the bronco!
Got a Comp rig on a Scythe chassis with a Komodo, i was looking hard at these. Made me a little worried you bent one so easy.
Hopefully it’s not a regular occurrence. I’m going to invest in some stronger dog bones and see if that helps
good info excellent video
Thanks for watching!
Always great content, thank you! One question: Do you have no springs in the shocks?
Thanks! Correct, no springs. I want to keep the ride height as low as possible
Ah, OK. Thanks. Why not 🤓
Looks like MOFO isn’t selling this kit anymore. Do you know anyone that is? Would love to try this kit out.
I think after a number of people experienced binding issues he stopped selling them. I think Meus racing may offer a similar kit
Holy scrub radius, Batman! With the 4ws is there an extra impact of the tires moving forward and backward as you steer? With my 4ws on FCX24 axles I still get some of the rocks I use stuck between the wheels and make the servos sad.
🤣🤣 So far no issues with the tires but admittedly I haven’t put much time on it since the initial runs
I recently got into RC Crawling with the SCX24 Deadbolt. I have modded some parts and not when I drive forward and turn, the car is lurching forward. Any hints would be greatly appreciated!
Only thing I got from MOFO RC is there micro servo mount. 💪🏻
The best servo mount ever!
@@CapeCrawlers for sure!
Hey Adam! Question, when you add the rear portal kit to the V2 portal kit do you still get the solid rear kit? So is it a full rear kit with another set of knuckles, etc included? So if I want to swap from steer axle to solid I have that option?
I have them both in my cart ready as soon as I hear back 😊
Yes. If you get the rear steer kit you get the full conventional portal kit plus the extra knuckles for the 4WS setup. But you have to buy both the portal kit and the extra 4WS add on.
Can I use the brushless motor that you put on the trx4m without changing the esc
You cannot. For a brushless conversion you’ll need some sort of aftermarket esc
Have you ever tried the all brass brass portal with the brass housing as well
With the brass axle housings too you mean? This is the only brass portal kit I've tried.
@@CapeCrawlers yes I have recently purchased two set of portal axles complete and all brass not just the k.ucmles but the housing itself also brass
@@CapeCrawlers I wish I could send pics .. there fantastic
Wooow its absolutely amazing Rc 😮done subscribes Sir
English plz??
Thank you!
Put rubber bands on all corners cinch it down pretty good see what u think
I’ll try that!
@@CapeCrawlers it will still flex not as much but it will climb and not feel so floppy
Hey! i was wondering where you got the second set of brass knuckles that you have on the back? my mofo portal set only came with 1 set and im trying to put them on my ax24. thanks for the very instructional videos!!!
Thanks for watching! Mofo has an optional 4WS kit with the portals. Its a ~$20 additional charge but you get the extra knuckles in addition to the portal kit.
@@CapeCrawlers thanks so much for the quick reply, your passion for rc’s and making content is something to strive for ☺️
Any update on the longevity of these? My biggest concern is the knuckle ripping the eyelet off of the stock axle. Would be interested in an update!
They’re still going strong! They’ve bound up on me a couple of times but nothing has broken.
@@CapeCrawlers thanks!
Have you tried using smaller diameter tire to compensate the ride height?
I have not but I plan to this weekend. Thinking the 55MM comp pins
Hey Adam will those portals fit the super 8 LGRP axle?
They will not and only because they are not compatible with CVD axles, which I believe are the only option available for the Super 8's.
I decided to not remove the foams and put holes in the wheels after watching that video
That’s my preferred approach
Having trouble with my mofo portals. Brock front axle shaft cuz of binding when I turn. I've tried flipping the knuckles but they just became more crooked.
I had to take mine apart and pull the dog bones back from the portals. They had gotten wedged there, too close to the knuckle, and were binding hard. Luckily they've been okay since then, but I had serious issues initially as well
Put a I ring between the portal box and the knuckle ? Sorry just trying to understand. Thanks for your help lmfao a short video would rock
do you have the stock plastic axle housings with them? I bought them and tried them on the treal front and had to do the stock rear. The treal rear has vertical screws that hold the bearings in place and they just didnt work with the treal front. It seemed to tow in the front like crazy too. Just wondering if they are built around the stock plastic axles to make them work properly. Also need to find somewhere that has stock dogbones since all the after market ones are junk
Yes I used the stock plastic housings on mine. I haven’t tried them on an aftermarket setup
@@CapeCrawlers ok ill have to put them together on the stock housing and see how they work. Thanks
Hey cape try to buy a pre built trx4m bronco that’s maxed out on a super sketchy website
Facebook marketplace here I come!
Yay!
Do you have a recommendation for axles?? I have thr Mofo portals and love them, only problem is, I keep snapping axles. (Probably because I'm 3s, lol).
We need some CVD's that are compatible with these things. I just stocked up on dog bones because I don't see any other alternative.
I just bought some Yeah Racing. I'll post back up in a while telling you if they were any better. I'm thinking where it meets the portal axles is binding and then snapping in the typical spot. Possibly polishing the Mofo part where the pins make contact could save things. Where are you breaking yours?
@CapeCrawlers Nevermind. Put one battery though it and broke the Yeah Racing left axle. I was actually even going easy on it too. I'm actually in disbelief.....
@@jeffoh5787 I am breaking them in the exact same spot. I found I had to push the dog bone in, then back it out. There seems to be an optimal “seat” for the connection. To be determine if they hold up. I’m hoping to get some run time on them this weekend
@CapeCrawlers So, I am having really bad binding where the dog bone seats. I've tried multiple positions and nothing seems to work for me. I get them to seat, but as soon as I steer it to the left or right, part of the dog bone slips out and either breaks the axle, bends the cup all out of whack, or binds severely. I don't see how I'm going to be able to run these. I actually just installed iniora aluminum axle housings because the dogbone unseated and bound up so badly that it ripped the knuckle mounting screw right out of the stock axle housing..... it almost seems to me that the dogbones aren't seating deep enough into the cup. Not sure if my set have different tolerances or what.
🤤🤤🤤🤤🤤🤤
so how do i get this to germany.....
Who won the cr 18p t hunter? I never saw
ACxRC I think was the username
Will the rear steer kit work for the ax24?
It should. The AX uses the same axle setup as the SCX24. I don't know if you would want to raise the center of gravity anymore on the AX though.
It’s RC4WD RC four wheel drive. Not awd
Ahh but it isnt. Two different companies.
Can you put them on injora axles
Does the Injora setup use dog bones? I can't remember. The portals will fit those axle housings, but they only work with a dogbone axle setup. If they are CV style axle shafts, the kit wont work.
What controller are you using for the rear steering 15:01
I use the Furitek Avatar
@@CapeCrawlers ok thanks
Would these work on the new ax24?
Yes they would, although I would be hesitant to put them on there and raise the chassis any more.
How did the steering scrub turn out ?
It’s pretty gnarly. I was not prepared for how wide the kit is! I’m going to have to get some smaller hugs to bring the track in a bit
@@CapeCrawlers I think it would be interesting. If you can find some reverse wheels You could tuck them in and cover the portals with them so they won’t hang up on stuff
WARNING, Do not use Yeah Racing dogbones! I can confirm that thr pins on the Yeah Racing dogbones is much shorter than the stock ones. If you use them, they will slip out and bind when turning and you will either snap the dogbone, or distort the hell out of the Mofo cups. Ask me how I know.
Thanks for sharing!
How much does a one of your full upgraded scx24 cost
He has mentioned in previous videos that it is about 400-500 for a fully upgraded set up or at least one that has all the expensive parts and chassis but realistically you can build one for 300 and be just as good. God bless!
The above comment nailed it 👍🏻
@@stratosamv7119 thank you
Stock axles?
It's got Mofo axle shafts and stock housings.
Yea stock axles housing
AX24 or this?
he just posted a video you need about $300 to get the ax24 on the level of his built scx24s
@@VS666 I know, I saw it. Was wondering which one he preferred.
Snaggletooth for the win. The AX24 has a long ways to go to reach the level of capability that snaggle has
Where can i find these please help
I think he discontinued the portal kit
Oh my gosh. You're on a roll 🔥🔥 great build! Do you know sleep? 🤣 Anyhow I'd really appreciate if you could respond to my email. I'm holding off a purchase to get that axial from you 🤩🤩🤩 appreciate it 🔥🔥
I'm working my way through my projects and cranking out the content as I do! Not much sleep lately LOL
# no c hubs 2023
Make portals great again
@@CapeCrawlers awesome
Those stickers on the body are awesome, I have a deadbolt as well and was wondering where you picked them up?
I got them on eBay. Frillsnfringe was the seller I believe
Shame mofo is US need to do a big order make it worth my while 👍🛻
Does he at least offer international shipping? I hope so.