Handleit Grips Variations and Why I Choose Handleit Grips Versus the Other Options
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Handleit Grips has many different options. In this video I go over the different textures, which ones you might like, and why I choose Handleit Grips when there are so many different option’s available.
**To make them stick** UNLOAD OR DIS-ASSEMBLE then tightly wrap a flat shoelace around the frame grip in even spaced complete coverage, tie it off, wrap it in a heating pad or heating blanket on high, after a heat cycle pull it out to cool and unwind it. It'll stay forever, never had a lift yet.
That’s brilliant. I will be doing that on my next application. Thank you.
You were correct. Absolutely brilliant and I appreciate the suggestion. Did this to my guns with grip tape and it works perfectly
I used rubber bands and a blow dryer on high setting for about 10 minutes. Gun survived 200 rounds so far, thanks
A heating blanket?
Can you use a heating pad instead of a blanket?
Great overview Bill. Thanks... Hey try out their hybrid series grips. It is a combination of rubber and sand pieces. The rubber is cut for the majority of the frame and the sandpaper pieces are cut for the back strap and palm swells on the grip. I have it on all my carry handguns and I carry aiwb... Perfect stuff for me.
Thanks again stay safe God Bless ✌️🇺🇲
Will do. I’m going to order one right now for my DR and MR920. Thanks
Bill, great video! Definitely one of the best explanations I’ve seen. I think the sandpaper is the best one. I ordered the new version of the sandpaper the Premium Series, it’s cost a little bit more but it’s looks promising.
I glad you like the video. Sandpaper is also my favorite but it does tug on the shirt so heads up.
I just picked one up for my new Glock I thought it was going to be cheap gimmick crap but im pleasantly surprised. Try the one that's gritty rubber that's what I use for my EDC. No rubbing and it still feels great in hand.
I do like that one too. Check out my newest videos on installing it with a heating pad. It will help keep it from loosing adhesion when it gets hot and wet
You should silicone carbide the stippling that’s not grippy enough for you since the grips don’t stick! It will give you that sand paper feel you like!! Thanks for your video
Good idea!
@billdrill22 inwouldnt silocon carbide your carry gun but if its for competition go ahead
If it's applied correctly per instructions included it does not come loose. I've had it on my handguns for 2+years with no wearing off or coming loose from grip...
Edge grips are great I like it the most
They really are. Like more aggressive but those really are the best if you want something not too aggressive but still textured
I don't want to and shouldn't HAVE to trim a "laser cut" piece to fit properly
Which one are you talking about? I agree with that
You don't carry any rubbers, eh? 😂 good reviews and comparison. Thanks for the good job
People actually carry rubbers? What’s this world coming to. Thank you.
How about the elite textute they have an option for? But no description
I found a description right here.
www.handleitgrips.com/product-page/handleitgrips-elite-series-gun-grip-enhancement-kit
I liked the elite personally. Good for ccw.
Getting a magwell willnhelp shooting snappy pistol help keep your pinkie finger on handle and not pinching also helps younfaster rwload
I can see that being beneficial. Great point. I do have an issue keeping a full purchase on compact pistols so I’ll definitely keep that in mind. Thank you
I bought the edge series for my m&p 2.0 and I realize that it slips off my hand MORE. I’m not sure why it feels slippery
I know exactly what you mean. Have you tried setting it a little? Also, I use chalk and that helps.
Great job man.
Thank you
So is the extreme more course then sand paper? I wouldn't think it would be.
It might actually be. It’s a little different coarse from the granulate. It’s hard to explain how it’s different but it’s pretty “extreme”
I just think Talon grips has the better grip between the two.
I agree if you’re referring to the granulate. Cool thing about handle it grips is they have so many options. They have more aggressive and less aggressive and their handgun selection is massive.
You think talons granulate is better?
@@a.d.c7941yes, well, I like talon better because of the single piece design. I should have probably said that first. I prefer their granulate because of the single piece design.
I see. Yes that one piece design is very a very nice detail. Thank you for the replies!!
I don’t have any rubbers here either.
Rubbers are for sailers
Well, I'm a sailor. Still don't have any rubbers, though...
@@leifhoklin2681 great comment
Hows the pdp ? I seem to prefer it to.the shadow systems personally
Love the pdp, especially the trigger. That trigger is special.
I just got the extreme, is it a combination of sandpaper and rubber? Thanks.
I’m not exactly sure, but it definitely is the most aggressive texturing imo. It will catch clothing too
I bought it for my edc, it catches clothing too much for edc? Appendix? Thanks for replying btw.
You’re welcome. It probably won’t affect your clothing unless you wear dryfit. But yes, it will catch some clothing. I carried aiwb with it and it wasn’t too bad
A heat gun runs to hot and drys the glue out fast, better to stick with a hair dryer.
I didn’t even think of that. That’s a good point.
What holsters do you use that fit good with the tape?
I usually use the tenicor malus sol but the tape won’t affect figment because the tape is on the frame of the gun and the holster holds the slide.
That PDP doesn’t need it
Maybe not, but boy does it shoot better with it on.
@@billdrill22 I have one on my 19x and it most definitely needed it😂Foxx grips decent too
@@shawnperico7221 I’ll check them out. Thanks.
Talon grips have been around for years and are way better than these pop up garbage grips. Talon pro grip will blow these copy cats out of the water.hands it grips are straight trash put the back in the trash and go buy real grips like talon.
Ehhh, I do like Talon, but Handleit isn’t “trash” imo. They make a great grip. Have you tried them? Also, Talon doesn’t make a grip for near the number of guns Handle it does.
I have both. Talon is ass compared to handle it. I’ve never had handle its peel up, but my talons have.
Both brands have peeled for me, but one of my viewers showed me an awesome way to apply them so they don’t peel. I’ll do a video asap on it so you can see. It amazing and works great.