I love thumb safety. Just another measure of security and safety which treasures less than a second to deactivate but can be lifesaver in case of user mistake or oversight.
I absolutely agree, I previously mentioned that I couldn't picture having a pistol without a safety on it, that's just crazy to me (from a safety aspect) to each his own of course🤷♀️
@@kennethcurtis1856 I was thinking the exact same thing. I learned from my old Army days that the safety is your friend. Most people who rant agiest thumb safety's have never been in a gunfight.
Just so everyone is aware, the reset on this weapon is much better than he’s claiming and showing. It’s actually super short and honestly just as good as my glocks stock triggers. This weapon has the ability to double strike so in the event you have a light primer strike, you don’t have to clear the malfunction but rather just pull the trigger again. That acts like a double action but only if the firing pin hasn’t been reset. That’s my understanding of how this weapon works.
Hell not only that the other day when I was buying my daughter a G3c I checked the trigger pull on six or seven different g3s and I couldn't believe every time I picked one up the trigger pull was LIKE BUTTER the best trigger I've ever pulled on any pistol under $500 Four or five years ago I bought her a Tikka T3 25-06 which has a tremendous trigger the surprise I had then is the same as I had when pulling the trigger on those G3c counting the one I bought her HELL I got out the door with $280 spent and a $50 mail in rebate still to come 😁 all around PS I walked in the store knowing I was going to buy a G2c but I swear the trigger pull on that gun had to be close to 8-9 lb$ Needless to say there was no way I was going to give that to her
@@terryeibeck8036 Right. I agree with you there. Very good buy and an even better value. It’s hard to beat this little gun that’s for sure but in my opinion, the g2c is a better all around gun than the g3c. I own both and I like the g2 better. It has better sights and I like the frame better but other than that, they’re the same damn thing basically. Taurus has done what any good company would do, they listened to the consumer and they delivered. Lately, Taurus has really stepped it up and impressed the hell out of me. A few years ago, I wouldn’t touch a damn Taurus. No way. I gave it chance though just because of multiple good reviews and I’m glad I did. I’ve put it in the hands of quite a few new gun owners who love it.
I agree.. I'm actually a big fan of taurus because when I started really getting into firearms I was big into CC on a budget. I carried the G2 PT111 for 5 years. I now own the G3 & G3c along with several other taurus guns. But I agree that the reset is better than mentioned. Not knocking this guys I like his videos.
@@jayteefishing1543 I agree with most of what you said but if you got a g2c that is equal to or anything close to what the G3c is then you ended up with a UNICORN because I swear I could not find NOT EVEN ONE out of the FIVE or SIX I picked up that had a trigger that would allow ANYONE to be accurate at the range Until the last 7 8 years I could care less if I ever owned a pistol my love is LONG RANGE SHOOTING and hunting / taking VOMITS and or DEER @ EXTREME DISTANCES. That said you can't have a trigger like the g2c has and become a great shot NO WAY‼️ And if you don't think it translates then here's an example years ago when Bass pro shop opened their new facility in Cincinnati Ohio back in the 90s I believe it was I went there on opening day they had a simulated pistol accuracy shooting display setup got winner got $100 and I OUTSHOT EVERYONE that came through the building that entire weekend That's coming from someone that knows how to squeeze a trigger & at long ranges watch the animal FALL going one further I only owned One pistol up until that time and it was a cheap little 22 revolver that had been in my sock drawer since I can remember I don't think I ever even shot a box of shells through it the entire time I owned it Like I said earlier they never peaked my interest I lived in the country & didn't worry about break-ins and other than killing a chicken / turkey off the farm for supper that's about as much use as I had for it
The Taurus G Series look great in OD Green. Taurus does a good job these days in not only giving you affordable, reliable Guns, but also giving you a wide range of Colors to choose from across their product lines. OD Green, Tan, Brown, Coyote, FDE, Grey, and Black with different Slide Color combinations. No other manufacturer gives you as many choices.
I recently purchased a Taurus G3 full size in the tan color. I got the tan color because all my other handguns are black. I wanted something different. Nothing wrong with that.
i love the thumb safety what i do when i go out and train is as im drawing from my holster as soon as my hand goes on the grip i flip the safety off as im pulling the gun up and forward. You just need to train and get use to it and your muscles memory will kick in👍🏻
The reset is short after the slide puts a new round in the chamber. Also you checked the trigger pull in double action, you should check it in single action.
If you’ll measure the trigger weight after you rack the slide you’ll find it’s about 1-1/2 lbs lighter. The way your checking it. Is only the weight you would pull in the event of a light hammer strike or dry fire session.
On your problem with the light digging into your thumb take your little needle files out and just clean off the edge of the lever to round it down so it's not digging into your thumb that's what I did with mine works great
I love my 4 Taurus pistols because they are all accurate, reliable and eats everything I feed them. I currently own the G2C, G3, TCP and TX22. I plan on purchasing a GX4 in the near future. I like the tactile loaded chamber indicator because you don't have to see it you can feel it in the dark and know it is loaded. Thanks for the video.
@@Dryblack1 I have tried 4 different JHPs with no issues on both my Taurus G2C and G3. I would not think the G3C would be much different since the mags are compatible. I'm running Winchester Personal Protection JHCs because they are relatively inexpensive and I have seen good performance from them in ballistic test. Good luck with your G3C.
@@keithtate1241 I've tried four different JHPs as well and so far they've all consistently failed to feed. It's been really frustrating considering the glowing reviews and lots of people like you saying it'll shoot anything. It was really expensive too to find out that mine might be a lemon. I'm going to take it back to the place I bought it to see if they can do anything for me
@@Dryblack1 I am sorry to hear that you are having issues with your G3C but if you bought it new you should be able to get a warranty repair and most stores can help with that. Hope you get it fixed.
I got a brand new Taurus g3. I went to the range . And was disappointed. It jam 4 or 5 times. And the slide wouldn't lock back..what do think it the problem?
You have to rack the slide to test the trigger weight and also to get an accurate reset. You measured the re-strike trigger pull and reset. It is much better than described in this video. good upgrades! regards
@@StoryTimerJeremiah502 light enough for an accident to happen... I watched a dude accidentally triple string one of these .... he was only intending a double tap he said but it's a very light pull after the reset from what I seen or maybe dudes grip was loose I dunno
Glad you mentioned that. I was about to. The actual reset is very short. It's one of the things I loved about the G3c. The "second strike capability" requires the trigger to go almost all the way back out.
You'd think someone who feels they have something to offer the gun community to the point they'd make a TH-cam, and has used a G2c as well would know that.
I purchased my Taurus G3C about six months ago? I bought it locally for $249.99 and Taurus at the time had a $25.00 mail in rebate. It has a great feel in my hand and I am very happy with it. Your review was helpful in making my decision. There is one thing I would disagree with you on your review. Using the second strike feature to dry fire train is not realistic. The trigger pull is not the same of course and the reset is much longer. I have also noted that the striker hit on the second trigger pull is not nearly as strong as a first trigger pull.
Loaded Barrel Indicator is GREAT for what goes bump in the middle of the night. Imagine you're in a low / no light situation or you don't want to take your eyes off your current focal point, etc... run your support hand across the top of your slide and you instantly know if you're chambered or not. 🤔
Check out where the new CEO for Taurus USA came from, I hear he's a smart fellow who has brought with him the quality guidelines from his background at Sig Saur. That's right ✅️
The g2c was my first pistol so I like the thumb safety, I keep one in the chamber and when I draw my thumb automatically hits that safety down training is key
I have the safety on while my gun is unholstered. When I holster the gun, i take the safety off. That way if I have to draw the gun in self defense it is ready to TCB. Otherwise I will place the gun back on safe before I draw. That routine works best for me.
With a bright enough light, in the dark as you mentioned, he'll be blinded for long enough for you to grab the advantage, and not aiming at your light. Go out in the dark and have your significant other shine 100 or so lumens right in your eyes, as if you are trying to identify the person behind the flashlight. See how well you can see in the next few minutes after taking that beam of light in the eyes.
Thumb safety is good for one thing in my opinion. That new gun owners and specifically women. My wife wouldn’t carry a gun in her purse (holstered) unless it had an external safety. So I got her this firearm until she’s comfortable carrying without a safety and she can carry the Glock I originally got her. I think it’s an extra level of confidence for them until they’re comfortable with it and I’d rather her or anyone carry with a safety than not carry at all.
You're absolutely correct, I'm a women and also new to carrying. I couldn't imagine carrying a pistol without a thumb safety on it, to me you're just asking to injure your own self. I do have one regret with buying the S&W M&P Shield EZ with the grip safety now that I'm used to it. It's very comfortable and easy to shoot ( hence the name😂) however the grip safety is the stupidest thing ever🙄😢.
@@larrylinn1221 BULLSH**, go take notes from women, it's an insult to always refer women to buy woosy revolvers. We love pistols as well. Start watching TH-cam channels "She Equips Herself" or "Geauga Firearms" their husband's agree with pistol carry also go learn something while you're at it. What a male chauvinist, SMH!!!
@@kayemkm1703 whatever is going to make you carry every single day. In my opinion, it’s one more thing to trip up on in the event you need your weapon fast. Draw and shoot is the quickest and only way for me. I’ll never ever carry a firearm that has a safety.
You are measuring the trigger reset incorrectly. Squeeze the trigger until it breaks. Maintain constant pull, and rack the slide only 1/4 of the way. Then you can release the trigger slowly to measure the true reset point. It is VERY short.
It’s funny because I’m pretty sure Taurus says the 2 and 3 won’t fit the same holster lol but they indeed will. It’s the same damn gun. The 2 is actually better in my opinion. It has better sights that are adjustable and it has a loaded chamber indicator too.
Regarding your comments on the "loaded chamber indicator", I respect your preference. But there are two things to consider. 1) I don't believe the goal is to be able to see it while aligning the sights on a target and 2) you stated other manufacturers use an indicator at the end of the slide to tell you a round is chambered. Actually that indicator at the end of the slide, found on other guns, tells you the striker is cocked and not that a round has been chambered.
Own and love the GX4 Toro but picking up the G3C because it's compatible with the CAA MCK! It's going to be my home defense weapon/setup while my GX4 will continue as my EDC.
I have gx4 and love it, best micro compact 9mm pistol until p365. Recently bought p365 for $499 with one free home defense ammo box, one extra 12 or 15 mag (total of 3 mags) and night sight.
They just did a recall on that firearm. I know you have to be careful clicking on hyperlinks but google gx4 safety recall and it will point you to the rest to enter your firearm's serial number. Good luck.
My first Two guns were pt709 slims,when I divorced my wife I took both. Both were 189 and no issue pistols,like my gc3! I'd like to get another. And some more 17 and 15 round mags
I feel the same way you do. I like to have a lot of mags too. That’s why I bought the G3C to go along with the G2C because the mags work in both and I shoot the bill out with either pistol. Awesome pistols and great shooters! Awesome review buddy!👍
It was a horrible review. He did the trigger weight test without racking the slide first. It's a lighter trigger than this guy's trigger test because he's showing only the re-strike double action trigger weight and reset. It has a short reset. The guys an idiot. 🤣🤣🤣
Its funny you mentioned youre more accurate with the G3C than with the G2C. Ive had a G3 for over a year. 700 rounds through it. Tons of Practice. I just bought a G3C in OD Green like yours. Now have about 150 rounds down range, and Im far more accurate with it.. and its noticeable as well. My first handgun I bought was the G2C. Loved it, but with only a few Mags through it, the Wife shot it, and said she had to have it. The G3 came out and I realllly wanted it, so Santa gave the G2C to the wife after I installed Fiber optic sights. But after having the G3 for awhile I missed the G2Cs more compact feel. It just Concealed so much better. It took a long time to find a G3C in OD Green, but RK Guns finally had one so I got one. Love it! Great video...
Sao trigger from keep tinkering. I use the pseudo backstrap on mine and it's great for bigger hands. Has a nice travel and I've put several rounds with fast shooting and normal. Not to mention that if you get a dead round it's easier to rack and keep going opposed to smashing that primer over and over. I'd also suggest lakeline llc for the recoil spring upgrade and firing pin guide. Makes this a solid cc protection piece.
It's almost like people don't realize that even though it has a thumb safety doesn't mean you ever have to use it. It's almost like it doesn't matter if it comes with it or not if you just don't want to use it
All you thumb safety fan boys…this gun comes with or without… if you don’t like them then don’t buy it…some manufacturers make both types…S&W for one… with and without a manual safety…if you hate them, good for you but no need to say they’re trash…plenty of folks know how and can remove the safety as they draw it out of the holster without thinking about it…if you can’t or don’t want to…but something else or a model that doesn’t have one
I bought a G3C, I'm waiting for the procedures of the Brazilian Federal Police, here in Brazil it costs about 820 dollars, high taxes, a good weapon, but it's good to polish the barrel ramp.
Yes I agree with you about magazines I have a 92x and I have seven magazines for it and I have a PPQ and I have six magazines for it but I have a PX4 strom compact and I have only two magazines came with the pistol I'll order at least four more magazines for it. I'm a Olight fan too.
That black and green looks nice. If the grip texture and finger pads were black, and the barrel and font were green, it would look super super. I went with the stainless slide.
Taurus is screaming to you all that you don't need to spend 6 to 700 dollars on a concealed carry. Mine just feels better to me than my P365. The feel, and once I made my unnecessary upgrades using my Dremel and orders from Lakeline LLC. I felt like I was king fish of concealed carry at the range. Feels better than my Glock 19 too. For the price and a few minor tweaks this baby is a steal. Don't overthink it.
That grip you use (to each their own) is not a conventional grip. Your left hand is forward of the trigger guard - which is why you're running into the attach light. Usually you're left index finger goes directly over your right middle finger which is tucked under the trigger guard. But like I say, to each their own.
I bought my G2C on Gunbroker. The listed price was 220 for OD green. It ended up being more expensive than the local gun store. 25 for shipping and the store wanted 35 when I picked the gun up.
I have a G3C in .40 caliber. I plan on the two internal upgrades that you did from Lakeline. Since I've already ordered an Olight PL-2 mini I'll see if I have the same issue that you did. I'm old school trained on holding the pistol with both hands. I haven't embraced the whole thumb resting on the slide method so I might be okay. If it's a problem, I'll put it on my much larger S&W M&P .40 I was gifted when I retired from LE in NC. All in all, I'm satisfied with my G3C even with the slight increase in recoil compared to the 9mm.
I despise the "fine motor skill" argument against a gun safety. The M-4 /AR-15 also has a selector switch (safety) that you need to engage to fire a round. Speaking from actual combat experience, disengaging a safety as you simultaneously raise your firearm to the ready is quite doable, even as you're getting shot at or moving to cover. It's how the military trains it's soldiers to fight. So train how you'll fight, and you'll fight how you train🤷
The only thing missing in the Taurus DA/SA guns is a decocker; that would be ideal: rack, load, decock, and you are ready for a double action first round without having to remember to release the safety. Perfect.
Maybe you should try the trigger pull like a striker fire pistol that doesn't have restrike capabilities. You need to hold the trigger and rack the slide to get the true reset.
i think the biggest upgrade is that rear sight. the G2 series and before had those crappy adjustable sights that are pure garbage. i've owned a few of them over the years and had horrible luck. i ususally change them out for fixed sights. nice to see that they finally got rid of them.
Taurus now has the G3X on their web site. Same compact slide and barrel length as the G3C, but instead of the 12rd "empty" pinky extension, a full 3 finger grip with 15rd G3 mags. The G3X would be good for appendix/IWB carry.
Train like you shoot. If one uses a thumb safety, than train. Just like having a light on your pistol. You must train with it or that split second of indecision could make your day bad. BTW, not sure if you covered the safety issue with lights on handguns or not.
Even though the loaded chamber indicater is not visible when aiming, they allow you to check the chamber status by feel, which could be helpful in the dark. Also, the red dot on the rear of a Canik shows if the striker is cocked and does not indicate whether or not there is a round in the chamber.
Have you tried the ported barrel on the g series¿ I've heard that they damper the recoil on the shorter barrels I believe they are made by Lakeview in the US and are available on the Taurus parts site in a variety of finishes. Nice color combination of green I'm going to go w the brushed stainless slide. Thanks for the video keep up the good work.
This is my opinion, but the light isn't the problem when it comes to it hitting your thumb. Your thumb shouldn't be there. That pad is for left handed shooters to rest their trigger finger on until they're ready to move it to the trigger itself. It's called the Memory Pad. You can see it's on both sides. Just suggesting trying a different grip.
Ok....im 2 years late but i did do all those upgrades except for that front sight. In an adrenaline rush encounter, the front sight is the last thing im looking at. No time for that. Bang Bang first, target hit or miss, cover next, its not target practice. Oh well....just me. Fun at the range.
Being a Taurus fanboy, I have watched many videos about Taurus G series guns. The most common complaint I see is with the trigger. I think that complaint is over blown.
Thanks for the informative video sir. I am considering buying Taurus G3C. My local sporting good store had them for $249.99 and Taurus this month has a $25.00 mail in rebate. I have never owned a striker fired pistol . I have been more of a 1911 and revolver guy. The Taurus G3C just seems too good a deal to pass up. I do not a weapon on my body as I have always felt my appearance was enough to ward off evil doers. Like Don Cervantes , Man of La Mancha, I am a knight of the woeful countenance.
I also have a G3C and am very happy with it. Where did you order the striker guide & guide rod from? I am not sure I would upgrade my slide though.. thanks!
I own g2c i had it cut and colored for holosun 507k love it in bronze. Short flat Trigger upgrade along with Lakeland upgrades. Love it. I also own G3 Toro. Ah hate the plate system i would have got a normal cut. Its probably getting put in an MCK anyway. Exelent: Galloway Precision Asmund Short Stroke Trigger
They do make the G3 series in a number of safeties with or without left or right handed or ambidextrous very few stores will carry the options. I have one set up to where the safety acts as a slide lock not a safety.
Sorry, but the Canik device you are describing is a Striker Cocked indicator. The loaded chamber indicator is like the G2c and can checked by touch. Shooting Illustrated has a article on the issue "Status Check: The Benefits of Loaded-Chamber Indicators"
Saw a G2C Vid that recommended getting the all steel guide rod & changing out the plastic striker sleeve w a metal one,so i did got them from amazon w the slide belt clip ,trigger is now more crispy
Your judging the reset way wrong. Keep your finger on the trigger after to work the slide then go forward you will see the real reset is very very short. Now most people will not be able to do that in a live fire fight I’m sure.
I really don't think the loaded chamber indicator is supposed to be used while looking down the sights and since you didn't like it whether it's there or not is there no consequence to you there are those of us who think it's a good idea
I bought a pt111 g2 in 2017. I practice pulling it out of holster and click safety off. It becomes second nature. Not that hard to draw and flip safety.
I think the G3c is a great firearm it looks good, reliable and great ergonomics. In my opinion I would like a more durable slide finish like the Gen 5 glock or similar. It would be nice if they came with a flush fit magazine base plate also and a 15 round magazine just to have those options out of the box. I know they make them but would be a nice feature to have out of the box. Lastly a deeper trigger guard cut to give you a little more room to get a firm grip and a higher purchase on the handgun. Mainly I would rather see a durable slide finish I think that is the most important thing. It's a budget handgun and I'm sure that would make the price a little higher.
I have a G2 and G3 and prefer the G2 loaded indicator because in the dark I can confirm camber loaded with a simple touch. Also, you didn't assess the trigger pull accurately at all. It didn't bother you at the range because it was probably only ab out 5 1/2 lb if you rack the slide. Also, the reset is very short after the slide is activated. I carry with one in the pipe so it is cocked, so the pull is about 5 1/2 lb. Also, I like the manuel safety and have my thumb on the safety anytime it leaves the holster so it is automatic and I don't have to think about it.
Maybe Taurus finally has a decent dependable pistol in the G series line! Congrats! Don't get me wrong, its hard to build guns as cheap as Taurus, and still be a good quality, dependable gun. The level of "quality" and level of "dependable" is different, for different people. I'm happy they are having some great success for themselves. Unfortunately they have to overcome all the years, of their own reputation now. Many guys I know will not buy a Taurus pistol of any kind. That is probably a little severe, but to each their own. They may have been burned by Taurus too many times already. These G2, G3, G4, guns do look like they finally have a decent CCW gun. Congrats!, you Brazilians at Taurus!
Dude, Taurus has been making dependable and reliable guns for decades and the G-Series guns have great reliable guns for at least the past 8 years, this is nothing new !!!! The problems that Taurus had in the past was really mostly user errors, but a few of their guns had an issue with "Drop Safety," but so did almost ALL the other major gun manufacturers at some point, including Beretta, Glock, Kimber, Smith and Wesson and most recently, Sig Sauer with it's P320. Even the Sig Sauer P365 had some issues with "light firing pin strikes" and broken firing pins. So, Taurus simply got a bad rap that they didn't deserve.....
@@lancewatson5952 Thank you because I would love to know what the past issues were, nobody ever goes into specifics they just continue to say they've had issues in the past which tells me absolutely nothing.
@@lancewatson5952 It was actually the reverse of what he said in the 1980s and early to mid 1990s. Taurus made pretty nice firearms for a great price because the vast majority of them were Beretta and S&W knockoffs. The late 90's into around circa 2014 they made a lot of original junk that was terrible. Fast forward into about the last 6 or 8 years they are turning that around once again. They never were a "high end" or "great" gun manufacturer....but for the price point they sell at they are plenty good enough and a very good value for your dollar. I recently bought a G3C for $259.99 - $50 gift card - $25 holiday rebate. That put me into it for less than $200 out the door tax included. I have endless high quality handguns $450+ from all of the top manufactures. I specifically wanted this as a bathroom gun and something to use as a fishing tackle box gun in my boat. Something to carry while working on vehicles and while mowing lawn on the John Deere tractor. If it gets all banged and scratched up who cares. I specifically bought this as a cheap beater you don't have to worry about. I think I made a good choice but more testing will confirm that. If this pistol works fairly reliably and is reasonably accurate I will be very pleased. I don't have to be as careful with it as I am with my better stuff.
@@kayemkm1703 The old PT92/PT99s and Model 85 .38 Spl snubnoses from the late 80's and early 90s were most likely before any of these guys time. I remember them well because I have been doing this over 40 years and my Dad and I had a FFL from 1990 - 1996. Those models in particular were pretty dang good and cheap. The .357 Magnum 4" blued and stainless revolvers of the same time period were as well.
You can adjust the railing on the light. I own the same light and you can even switch the lever to close the other way including sliding it forward away from your finger.Nice G3C bro. Where'd you get the od green and how much more do they charge?
As much as I love my Taurus G3 and Pt111, after all these upgrades that you did, you would probably be better of buying the M&P2.0 CORE... Im waiting for blackfriday to get my CORE M&P9 2.0...
I have the same pl-mini 2 light on my g3c toro, and am really liking that holster from Buck's. I see their website has an optics option, but do not see the option for the olight. How can I get it made like yours?
I love thumb safety. Just another measure of security and safety which treasures less than a second to deactivate but can be lifesaver in case of user mistake or oversight.
Totally agree. I have thumb on my m&p also. I've trained to take the safety off as I'm pulling my pistol from The holster
I absolutely agree, I previously mentioned that I couldn't picture having a pistol without a safety on it, that's just crazy to me (from a safety aspect) to each his own of course🤷♀️
There's a reason the military requires thumb safety's on their handguns.
@@kennethcurtis1856 I was thinking the exact same thing. I learned from my old Army days that the safety is your friend. Most people who rant agiest thumb safety's have never been in a gunfight.
Because military personnel are dumb.
I would rather have the thumb safety and not need it than need the thumb safety and not have it.
Just so everyone is aware, the reset on this weapon is much better than he’s claiming and showing. It’s actually super short and honestly just as good as my glocks stock triggers. This weapon has the ability to double strike so in the event you have a light primer strike, you don’t have to clear the malfunction but rather just pull the trigger again. That acts like a double action but only if the firing pin hasn’t been reset. That’s my understanding of how this weapon works.
Hell not only that
the other day when I was buying my daughter a G3c I checked the trigger pull on six or seven different g3s and I couldn't believe every time I picked one up the trigger pull was LIKE BUTTER the best trigger I've ever pulled on any pistol under $500
Four or five years ago I bought her a Tikka T3 25-06 which has a tremendous trigger
the surprise I had then is the same as I had when pulling the trigger on those G3c counting the one I bought her HELL I got out the door with $280 spent and a $50 mail in rebate still to come 😁 all around
PS I walked in the store knowing I was going to buy a G2c but I swear the trigger pull on that gun had to be close to 8-9 lb$
Needless to say there was no way I was going to give that to her
@@terryeibeck8036 Right. I agree with you there. Very good buy and an even better value. It’s hard to beat this little gun that’s for sure but in my opinion, the g2c is a better all around gun than the g3c. I own both and I like the g2 better. It has better sights and I like the frame better but other than that, they’re the same damn thing basically. Taurus has done what any good company would do, they listened to the consumer and they delivered. Lately, Taurus has really stepped it up and impressed the hell out of me. A few years ago, I wouldn’t touch a damn Taurus. No way. I gave it chance though just because of multiple good reviews and I’m glad I did. I’ve put it in the hands of quite a few new gun owners who love it.
I agree.. I'm actually a big fan of taurus because when I started really getting into firearms I was big into CC on a budget. I carried the G2 PT111 for 5 years. I now own the G3 & G3c along with several other taurus guns. But I agree that the reset is better than mentioned. Not knocking this guys I like his videos.
@@dustydav9816 they’ve stepped up their game lately. I’ve been impressed.
@@jayteefishing1543 I agree with most of what you said but if you got a g2c that is equal to or anything close to what the G3c is then you ended up with a UNICORN because I swear I could not find NOT EVEN ONE out of the FIVE or SIX I picked up that had a trigger that would allow ANYONE to be accurate at the range
Until the last 7 8 years I could care less if I ever owned a pistol
my love is LONG RANGE SHOOTING and hunting / taking VOMITS and or DEER @ EXTREME DISTANCES. That said you can't have a trigger like the g2c has and become a great shot NO WAY‼️
And if you don't think it translates then here's an example years ago when Bass pro shop opened their new facility in Cincinnati Ohio back in the 90s I believe it was I went there on opening day they had a simulated pistol accuracy shooting display setup got winner got $100 and I OUTSHOT EVERYONE that came through the building that entire weekend
That's coming from someone that knows how to squeeze a trigger & at long ranges watch the animal FALL
going one further I only owned One pistol up until that time and it was a cheap little 22 revolver that had been in my sock drawer since I can remember
I don't think I ever even shot a box of shells through it the entire time I owned it
Like I said earlier they never peaked my interest
I lived in the country & didn't worry about break-ins and other than killing a chicken / turkey off the farm for supper that's about as much use as I had for it
The Taurus G Series look great in OD Green. Taurus does a good job these days in not only giving you affordable, reliable Guns, but also giving you a wide range of Colors to choose from across their product lines. OD Green, Tan, Brown, Coyote, FDE, Grey, and Black with different Slide Color combinations.
No other manufacturer gives you as many choices.
Technically, sccy gives more. But they suck
I'm just interested if it goes boom when the trigger is pulled. I'm not into fashion design when it comes to self defense.
I recently purchased a Taurus G3 full size in the tan color. I got the tan color because all my other handguns are black. I wanted something different. Nothing wrong with that.
@@kennethcurtis1856 that’s exactly right my friend. That’s why I chose Glock.
Love taurus good quality reliable guns and are priced properly
i love the thumb safety what i do when i go out and train is as im drawing from my holster as soon as my hand goes on the grip i flip the safety off as im pulling the gun up and forward. You just need to train and get use to it and your muscles memory will kick in👍🏻
The reset is short after the slide puts a new round in the chamber. Also you checked the trigger pull in double action, you should check it in single action.
Exactly. SMH 🤦
If you’ll measure the trigger weight after you rack the slide you’ll find it’s about 1-1/2 lbs lighter. The way your checking it. Is only the weight you would pull in the event of a light hammer strike or dry fire session.
I'm glad someone said this
Yes I couldn't believe he didn't figure that out. I mean good God!!!
On your problem with the light digging into your thumb take your little needle files out and just clean off the edge of the lever to round it down so it's not digging into your thumb that's what I did with mine works great
I love my 4 Taurus pistols because they are all accurate, reliable and eats everything I feed them. I currently own the G2C, G3, TCP and TX22. I plan on purchasing a GX4 in the near future. I like the tactile loaded chamber indicator because you don't have to see it you can feel it in the dark and know it is loaded. Thanks for the video.
My g3c has a strong distaste for hollow points, but works perfectly with fmj
@@Dryblack1 I have tried 4 different JHPs with no issues on both my Taurus G2C and G3. I would not think the G3C would be much different since the mags are compatible. I'm running Winchester Personal Protection JHCs because they are relatively inexpensive and I have seen good performance from them in ballistic test. Good luck with your G3C.
@@keithtate1241 I've tried four different JHPs as well and so far they've all consistently failed to feed. It's been really frustrating considering the glowing reviews and lots of people like you saying it'll shoot anything. It was really expensive too to find out that mine might be a lemon. I'm going to take it back to the place I bought it to see if they can do anything for me
@@Dryblack1 I am sorry to hear that you are having issues with your G3C but if you bought it new you should be able to get a warranty repair and most stores can help with that. Hope you get it fixed.
I got a brand new Taurus g3. I went to the range . And was disappointed. It jam 4 or 5 times. And the slide wouldn't lock back..what do think it the problem?
Very, very informative video. I truly appreciate the honest critics with NO POLITICAL B.S.!
The Sig Sauer P226 mags work in it also. I have one and it works great.
You have to rack the slide to test the trigger weight and also to get an accurate reset. You measured the re-strike trigger pull and reset. It is much better than described in this video. good upgrades! regards
I bought the g3c Toro in Pakistan, it came in a case, 3 mags, cleaning brush and adjustments for the optics.
The pull test was inaccurate. You should’ve racked the slide to actually feel the reset. There is a difference between racked and unracked
i saw 4.25 pds in another video.
Yeah he doesn’t know how this thing works.
Isnt there always ... it's called the reset of the full cycle
@@StoryTimerJeremiah502 light enough for an accident to happen... I watched a dude accidentally triple string one of these .... he was only intending a double tap he said but it's a very light pull after the reset from what I seen or maybe dudes grip was loose I dunno
Its double action
The reset is actually rlly short you just have to have the trigger still pulled then Rack slide to feel the reset.
Glad you mentioned that. I was about to. The actual reset is very short. It's one of the things I loved about the G3c. The "second strike capability" requires the trigger to go almost all the way back out.
You'd think someone who feels they have something to offer the gun community to the point they'd make a TH-cam, and has used a G2c as well would know that.
I was about to say the same thing, the reset is actually short af. Great review though
You'll never feel the trigger the way he tested unless you're dry firing the gun 🤣....gotta love educators that aren't educated
Yes…the actual reset is short and a very light crisp trigger pull…it’s tons better than any other firearm I own other than maybe my Canik…
I purchased my Taurus G3C about six months ago? I bought it locally for $249.99 and Taurus
at the time had a $25.00 mail in rebate. It has a great feel in my hand and I am very happy with it.
Your review was helpful in making my decision.
There is one thing I would disagree with you on your review. Using the second strike feature
to dry fire train is not realistic. The trigger pull is not the same of course and the reset is much longer.
I have also noted that the striker hit on the second trigger pull is not nearly as strong as a first trigger pull.
Loaded Barrel Indicator is GREAT for what goes bump in the middle of the night.
Imagine you're in a low / no light situation or you don't want to take your eyes off your current focal point, etc... run your support hand across the top of your slide and you instantly know if you're chambered or not. 🤔
Check out where the new CEO for Taurus USA came from, I hear he's a smart fellow who has brought with him the quality guidelines from his background at Sig Saur. That's right ✅️
The g2c was my first pistol so I like the thumb safety, I keep one in the chamber and when I draw my thumb automatically hits that safety down training is key
I have the safety on while my gun is unholstered. When I holster the gun, i take the safety off. That way if I have to draw the gun in self defense it is ready to TCB. Otherwise I will place the gun back on safe before I draw. That routine works best for me.
I never use a light; it gives your opponent a great aiming point when walking in the dark.
With a bright enough light, in the dark as you mentioned, he'll be blinded for long enough for you to grab the advantage, and not aiming at your light. Go out in the dark and have your significant other shine 100 or so lumens right in your eyes, as if you are trying to identify the person behind the flashlight. See how well you can see in the next few minutes after taking that beam of light in the eyes.
Thumb safety is good for one thing in my opinion. That new gun owners and specifically women. My wife wouldn’t carry a gun in her purse (holstered) unless it had an external safety. So I got her this firearm until she’s comfortable carrying without a safety and she can carry the Glock I originally got her. I think it’s an extra level of confidence for them until they’re comfortable with it and I’d rather her or anyone carry with a safety than not carry at all.
You're absolutely correct, I'm a women and also new to carrying. I couldn't imagine carrying a pistol without a thumb safety on it, to me you're just asking to injure your own self. I do have one regret with buying the S&W M&P Shield EZ with the grip safety now that I'm used to it. It's very comfortable and easy to shoot ( hence the name😂) however the grip safety is the stupidest thing ever🙄😢.
Get her a hammerless revolver and all she has to do is aim and shoot or just shoot no jacking around.
@@larrylinn1221 BULLSH**, go take notes from women, it's an insult to always refer women to buy woosy revolvers. We love pistols as well. Start watching TH-cam channels "She Equips Herself" or "Geauga Firearms" their husband's agree with pistol carry also go learn something while you're at it. What a male chauvinist, SMH!!!
@@kayemkm1703 whatever is going to make you carry every single day. In my opinion, it’s one more thing to trip up on in the event you need your weapon fast. Draw and shoot is the quickest and only way for me. I’ll never ever carry a firearm that has a safety.
I don't point a Glock at my 🐓
Just order a G3c od green. I really like its size. It packs a hell of a punch.
You are measuring the trigger reset incorrectly. Squeeze the trigger until it breaks. Maintain constant pull, and rack the slide only 1/4 of the way. Then you can release the trigger slowly to measure the true reset point. It is VERY short.
It’s funny because I’m pretty sure Taurus says the 2 and 3 won’t fit the same holster lol but they indeed will. It’s the same damn gun. The 2 is actually better in my opinion. It has better sights that are adjustable and it has a loaded chamber indicator too.
Indicator is a hole on top now
Regarding your comments on the "loaded chamber indicator", I respect your preference. But there are two things to consider. 1) I don't believe the goal is to be able to see it while aligning the sights on a target and 2) you stated other manufacturers use an indicator at the end of the slide to tell you a round is chambered. Actually that indicator at the end of the slide, found on other guns, tells you the striker is cocked and not that a round has been chambered.
Well said.
Yup!!!!
Love my g3c! They make50 rd drum & CAA MCK for the Taurus models now.. turns that pistol into a pcc beast! Highly recommend
Are the drum mags reliable for the Taurus g3c? And if so which brand. Thanks ! Have a good rest of your day
@@personperson6395 so far yes.. promag
That doesn't sound very concealable.
Own and love the GX4 Toro but picking up the G3C because it's compatible with the CAA MCK! It's going to be my home defense weapon/setup while my GX4 will continue as my EDC.
@@matthewfisher3201 for the MCK I recommend the G3 instead of the G3C.. the longer grip works better.
After watching many videos of trigger pull test, yours are the highest. Most others come up with 5.5....
I have gx4 and love it, best micro compact 9mm pistol until p365. Recently bought p365 for $499 with one free home defense ammo box, one extra 12 or 15 mag (total of 3 mags) and night sight.
I have a g2c but my buddy carries that same p365 I gotta say I love it
They just did a recall on that firearm. I know you have to be careful clicking on hyperlinks but google gx4 safety recall and it will point you to the rest to enter your firearm's serial number. Good luck.
My first Two guns were pt709 slims,when I divorced my wife I took both. Both were 189 and no issue pistols,like my gc3! I'd like to get another. And some more 17 and 15 round mags
As a 1911 user. Thumb safety is important to me. I love carrying locked and loaded.
I feel the same way you do. I like to have a lot of mags too. That’s why I bought the G3C to go along with the G2C because the mags work in both and I shoot the bill out with either pistol. Awesome pistols and great shooters! Awesome review buddy!👍
I own a G2 that came with 2 mags, a G3 that came with 2 mags and a G3C that came with 3 mags. That gives me 7 mags that will work in the G2 and G3C.
I really appreciate you making this video. I just picked up a gc3 as my first firearm and I’m excited to get to know it over the coming weeks
I just bought one today especially considering it was on sale for the holidays😂. I would love to know how it's been working out for you?
same here man just picked it up yesterday. how's it been?
@@kayemkm1703any updates?
@@AlexanderVib👀 I certainly hope you're not referring to me, when you say man.
@@kayemkm1703 i wasn't initially but i do apologize if it came off that way
Great review, answered a lot of the questions I had about upgrades.
It was a horrible review. He did the trigger weight test without racking the slide first. It's a lighter trigger than this guy's trigger test because he's showing only the re-strike double action trigger weight and reset. It has a short reset. The guys an idiot. 🤣🤣🤣
I am having my G3c milled to fit a Holosun 507c. It will be my first red dot, and i am looking forward to shooting the gun.
Its funny you mentioned youre more accurate with the G3C than with the G2C. Ive had a G3 for over a year. 700 rounds through it. Tons of Practice. I just bought a G3C in OD Green like yours. Now have about 150 rounds down range, and Im far more accurate with it.. and its noticeable as well. My first handgun I bought was the G2C. Loved it, but with only a few Mags through it, the Wife shot it, and said she had to have it. The G3 came out and I realllly wanted it, so Santa gave the G2C to the wife after I installed Fiber optic sights. But after having the G3 for awhile I missed the G2Cs more compact feel. It just Concealed so much better. It took a long time to find a G3C in OD Green, but RK Guns finally had one so I got one. Love it! Great video...
Sao trigger from keep tinkering. I use the pseudo backstrap on mine and it's great for bigger hands. Has a nice travel and I've put several rounds with fast shooting and normal. Not to mention that if you get a dead round it's easier to rack and keep going opposed to smashing that primer over and over. I'd also suggest lakeline llc for the recoil spring upgrade and firing pin guide. Makes this a solid cc protection piece.
Taurus does make the G3 series without the thumb safety…so you can order it with or without I have one of each
It's almost like people don't realize that even though it has a thumb safety doesn't mean you ever have to use it. It's almost like it doesn't matter if it comes with it or not if you just don't want to use it
No one mentions it, but just like Caniks (or at least the TP9 SFX) the G3C will fire with no magazine.
All you thumb safety fan boys…this gun comes with or without… if you don’t like them then don’t buy it…some manufacturers make both types…S&W for one… with and without a manual safety…if you hate them, good for you but no need to say they’re trash…plenty of folks know how and can remove the safety as they draw it out of the holster without thinking about it…if you can’t or don’t want to…but something else or a model that doesn’t have one
I bought a G3C, I'm waiting for the procedures of the Brazilian Federal Police, here in Brazil it costs about 820 dollars, high taxes, a good weapon, but it's good to polish the barrel ramp.
Yes I agree with you about magazines I have a 92x and I have seven magazines for it and I have a PPQ and I have six magazines for it but I have a PX4 strom compact and I have only two magazines came with the pistol I'll order at least four more magazines for it. I'm a Olight fan too.
That black and green looks nice. If the grip texture and finger pads were black, and the barrel and font were green, it would look super super. I went with the stainless slide.
They were $199 at Cabela's during black Friday.
Taurus is screaming to you all that you don't need to spend 6 to 700 dollars on a concealed carry. Mine just feels better to me than my P365. The feel, and once I made my unnecessary upgrades using my Dremel and orders from Lakeline LLC. I felt like I was king fish of concealed carry at the range. Feels better than my Glock 19 too. For the price and a few minor tweaks this baby is a steal. Don't overthink it.
Hey fantastic Video !
I have a G3c but the T.O.R.O version, ready to optics version ....
That grip you use (to each their own) is not a conventional grip. Your left hand is forward of the trigger guard - which is why you're running into the attach light. Usually you're left index finger goes directly over your right middle finger which is tucked under the trigger guard. But like I say, to each their own.
I bought my G2C on Gunbroker. The listed price was 220 for OD green. It ended up being more expensive than the local gun store. 25 for shipping and the store wanted 35 when I picked the gun up.
I have noticed that about on line sellers. I always get a lower tolal cost at my local Rural King.
Thanks for the video, just bought the g3. Have not shot it yet, but I am looking forward to it.
Great review, brother. I think you just helped sell me a G3c. Liked and subscribed. Keep up the good work.
You had me up until that Constitution comment (mag sizes) - I must have missed that line stating specific mag sizes in the Constitution lol
I have a G3C in .40 caliber. I plan on the two internal upgrades that you did from Lakeline. Since I've already ordered an Olight PL-2 mini I'll see if I have the same issue that you did. I'm old school trained on holding the pistol with both hands. I haven't embraced the whole thumb resting on the slide method so I might be okay. If it's a problem, I'll put it on my much larger S&W M&P .40 I was gifted when I retired from LE in NC. All in all, I'm satisfied with my G3C even with the slight increase in recoil compared to the 9mm.
I despise the "fine motor skill" argument against a gun safety. The M-4 /AR-15 also has a selector switch (safety) that you need to engage to fire a round. Speaking from actual combat experience, disengaging a safety as you simultaneously raise your firearm to the ready is quite doable, even as you're getting shot at or moving to cover. It's how the military trains it's soldiers to fight. So train how you'll fight, and you'll fight how you train🤷
When I go to the range, I just move the Baldr forward, zero issues.
The only thing missing in the Taurus DA/SA guns is a decocker; that would be ideal: rack, load, decock, and you are ready for a double action first round without having to remember to release the safety. Perfect.
Maybe you should try the trigger pull like a striker fire pistol that doesn't have restrike capabilities. You need to hold the trigger and rack the slide to get the true reset.
Excellent video. Thanks.
i think the biggest upgrade is that rear sight. the G2 series and before had those crappy adjustable sights that are pure garbage. i've owned a few of them over the years and had horrible luck. i ususally change them out for fixed sights. nice to see that they finally got rid of them.
Taurus now has the G3X on their web site. Same compact slide and barrel length as the G3C, but instead of the 12rd "empty" pinky extension, a full 3 finger grip with 15rd G3 mags. The G3X would be good for appendix/IWB carry.
The Taurus website offers a 15 and 17 round magazine for the G3C which gives you the same or more capacity as the G3X
I want the opposite of that
Great review, with very good insights and recommendations and very honest opinions. Spot on for the market for this firearn with pros and cons.
If your wanting to try a different light i have the tlr6 (with rail) light and lazer combo. The only problem is the dont make holster for that set up
Train like you shoot. If one uses a thumb safety, than train. Just like having a light on your pistol. You must train with it or that split second of indecision could make your day bad. BTW, not sure if you covered the safety issue with lights on handguns or not.
Even though the loaded chamber indicater is not visible when aiming, they allow you to check the chamber status by feel, which could be helpful in the dark. Also, the red dot on the rear of a Canik shows if the striker is cocked and does not indicate whether or not there is a round in the chamber.
Keep tinkering has an amazing trigger for g2c line
Have you tried the ported barrel on the g series¿ I've heard that they damper the recoil on the shorter barrels I believe they are made by Lakeview in the US and are available on the Taurus parts site in a variety of finishes. Nice color combination of green I'm going to go w the brushed stainless slide. Thanks for the video keep up the good work.
This is my opinion, but the light isn't the problem when it comes to it hitting your thumb. Your thumb shouldn't be there. That pad is for left handed shooters to rest their trigger finger on until they're ready to move it to the trigger itself. It's called the Memory Pad. You can see it's on both sides. Just suggesting trying a different grip.
Ok....im 2 years late but i did do all those upgrades except for that front sight. In an adrenaline rush encounter, the front sight is the last thing im looking at. No time for that. Bang Bang first, target hit or miss, cover next, its not target practice. Oh well....just me. Fun at the range.
Being a Taurus fanboy, I have watched many videos about Taurus G series guns. The most common complaint I see is with the trigger. I think that complaint is over blown.
Great video, helpful and very infromative. I have been looking for links to great flashlight, holster and slide upgrade for red dot sights.
I pocket carry consistently for EDC using a Desantis super fly and will carry 380 or a micro 9 especially the Canik Mete 9
Thanks for the informative video sir. I am considering buying Taurus G3C. My local sporting good store had them for
$249.99 and Taurus this month has a $25.00 mail in rebate. I have never owned a striker fired pistol .
I have been more of a 1911 and revolver guy. The Taurus G3C just seems too good a deal to pass up.
I do not a weapon on my body as I have always felt my appearance was enough to ward off evil doers.
Like Don Cervantes , Man of La Mancha, I am a knight of the woeful countenance.
I have the G3 and G3c and love them both...
I also have a G3C and am very happy with it. Where did you order the striker guide & guide rod from? I am not sure I would upgrade my slide though.. thanks!
I own g2c i had it cut and colored for holosun 507k love it in bronze. Short flat Trigger upgrade along with Lakeland upgrades. Love it. I also own G3 Toro. Ah hate the plate system i would have got a normal cut. Its probably getting put in an MCK anyway.
Exelent: Galloway Precision Asmund Short Stroke Trigger
They do make the G3 series in a number of safeties with or without left or right handed or ambidextrous very few stores will carry the options. I have one set up to where the safety acts as a slide lock not a safety.
the tigger has 2 stages if you know how to use them after fireing just go to the reset and its much better then that long pulll
Sorry, but the Canik device you are describing is a Striker Cocked indicator. The loaded chamber indicator is like the G2c and can checked by touch.
Shooting Illustrated has a article on the issue "Status Check: The Benefits of Loaded-Chamber Indicators"
I really enjoyed your video, I'm truly thinking the same one for my concealed carry, I really don't want to spend over $500 for a compact.
I actually just bought the G3 In desert tan with a black slide it was my first gun purchase I can’t wait to shoot it
The G3C starts out scratchy and gritty but wears in very nice. I am pleased with mine in 40 S&W. Didn't like the grip texture. Talon Grips fixed that.
Keep tinkering sells great replacement trigger and spring for low cost major improvement on the travel and reset
Saw a G2C Vid that recommended getting the all steel guide rod & changing out the plastic striker sleeve w a metal one,so i did got them from amazon w the slide belt clip ,trigger is now more crispy
Make sure you disassemble, clean and oil before using. Somtimes there are lil casting debris in there.
Like you said it has a trigger safety, so if you just left the manual safety off would that almost be the same as not having a manual safety?
taurus g3c can come with or without a safety, with or without an optics mount, with or without night sights.
Your judging the reset way wrong. Keep your finger on the trigger after to work the slide then go forward you will see the real reset is very very short. Now most people will not be able to do that in a live fire fight I’m sure.
I really don't think the loaded chamber indicator is supposed to be used while looking down the sights and since you didn't like it whether it's there or not is there no consequence to you there are those of us who think it's a good idea
I bought a pt111 g2 in 2017. I practice pulling it out of holster and click safety off. It becomes second nature. Not that hard to draw and flip safety.
I think the G3c is a great firearm it looks good, reliable and great ergonomics. In my opinion I would like a more durable slide finish like the Gen 5 glock or similar. It would be nice if they came with a flush fit magazine base plate also and a 15 round magazine just to have those options out of the box. I know they make them but would be a nice feature to have out of the box. Lastly a deeper trigger guard cut to give you a little more room to get a firm grip and a higher purchase on the handgun. Mainly I would rather see a durable slide finish I think that is the most important thing. It's a budget handgun and I'm sure that would make the price a little higher.
The slide coating is a strong Teflon impregnated into the slide metal. On par with Glock slide finish if not better
Because being there always promise
I have a G2 and G3 and prefer the G2 loaded indicator because in the dark I can confirm camber loaded with a simple touch. Also, you didn't assess the trigger pull accurately at all. It didn't bother you at the range because it was probably only ab out 5 1/2 lb if you rack the slide. Also, the reset is very short after the slide is activated. I carry with one in the pipe so it is cocked, so the pull is about 5 1/2 lb. Also, I like the manuel safety and have my thumb on the safety anytime it leaves the holster so it is automatic and I don't have to think about it.
Maybe Taurus finally has a decent dependable pistol in the G series line! Congrats! Don't get me wrong, its hard to build guns as cheap as Taurus, and still be a good quality, dependable gun. The level of "quality" and level of "dependable" is different, for different people. I'm happy they are having some great success for themselves. Unfortunately they have to overcome all the years, of their own reputation now. Many guys I know will not buy a Taurus pistol of any kind. That is probably a little severe, but to each their own. They may have been burned by Taurus too many times already. These G2, G3, G4, guns do look like they finally have a decent CCW gun. Congrats!, you Brazilians at Taurus!
Dude, Taurus has been making dependable and reliable guns for decades and the G-Series guns have great reliable guns for at least the past 8 years, this is nothing new !!!! The problems that Taurus had in the past was really mostly user errors, but a few of their guns had an issue with "Drop Safety," but so did almost ALL the other major gun manufacturers at some point, including Beretta, Glock, Kimber, Smith and Wesson and most recently, Sig Sauer with it's P320. Even the Sig Sauer P365 had some issues with "light firing pin strikes" and broken firing pins. So, Taurus simply got a bad rap that they didn't deserve.....
@@lancewatson5952 Thank you because I would love to know what the past issues were, nobody ever goes into specifics they just continue to say they've had issues in the past which tells me absolutely nothing.
@@lancewatson5952
It was actually the reverse of what he said in the 1980s and early to mid 1990s. Taurus made pretty nice firearms for a great price because the vast majority of them were Beretta and S&W knockoffs. The late 90's into around circa 2014 they made a lot of original junk that was terrible. Fast forward into about the last 6 or 8 years they are turning that around once again. They never were a "high end" or "great" gun manufacturer....but for the price point they sell at they are plenty good enough and a very good value for your dollar. I recently bought a G3C for $259.99 - $50 gift card - $25 holiday rebate. That put me into it for less than $200 out the door tax included. I have endless high quality handguns $450+ from all of the top manufactures. I specifically wanted this as a bathroom gun and something to use as a fishing tackle box gun in my boat. Something to carry while working on vehicles and while mowing lawn on the John Deere tractor. If it gets all banged and scratched up who cares. I specifically bought this as a cheap beater you don't have to worry about. I think I made a good choice but more testing will confirm that. If this pistol works fairly reliably and is reasonably accurate I will be very pleased. I don't have to be as careful with it as I am with my better stuff.
@@kayemkm1703
The old PT92/PT99s and Model 85 .38 Spl snubnoses from the late 80's and early 90s were most likely before any of these guys time. I remember them well because I have been doing this over 40 years and my Dad and I had a FFL from 1990 - 1996. Those models in particular were pretty dang good and cheap. The .357 Magnum 4" blued and stainless revolvers of the same time period were as well.
Love your channel
You can adjust the railing on the light. I own the same light and you can even switch the lever to close the other way including sliding it forward away from your finger.Nice G3C bro. Where'd you get the od green and how much more do they charge?
Lake Line does trigger upgrades for G2C and G3C
As much as I love my Taurus G3 and Pt111, after all these upgrades that you did, you would probably be better of buying the M&P2.0 CORE... Im waiting for blackfriday to get my CORE M&P9 2.0...
Thank you for the video. Well done. Very thorough.
Great video. Chicago loves you.
I have the same pl-mini 2 light on my g3c toro, and am really liking that holster from Buck's. I see their website has an optics option, but do not see the option for the olight. How can I get it made like yours?
I got a light and green dot laser combo for like 29 bucks for my g3c its nice too lol