Installing Vantech H1 Ladder Rack on Ford Transit Connect

We install an H1 Ladder Rack from Vantech on our 2016 Ford Transit Connect LWB.
Learn more about this product at: upfitsupply.co...
Vantech Part Numbers: H1713B (shown in video), H1712B, H1713W, H1712W, H1702W, H1702B, H1703W, H1703B
Upfit Supply SKU: VNT-H1713B (shown in video)
Unboxing: • Unboxing Vantech H1 Cr...
Overview: • Vantech H1 Ladder Rack...
#installation #vantech #upfitsupply #cargovan

[@coryshay8433]

If you have the 2 bar h1 model which hole locations would you use on the transit?

[@upfitsupply]

It’s up to you really. Typically people will go into location 2 & 5 on the Transit Connect. Take into consideration the length of your ladders or other cargo you will have up there. Usually the further rearward you mount, the less wind noise.

[@NJDFAN76]

@@upfitsupplywhat location for the 2 bar h1 bar set on a Transit Connect with short wheelbase

[@upfitsupply]

@@NJDFAN76 It really is installer's choice. You can choose based on the length of your ladders and preference.

[@RooftopViewAssembly]

I am having trouble with the front bar. Driver and passenger side. I removed the clips up top but isn’t open like the rear. How do I remove all of the indoor covers without ripping them? You skipped that part.

[@upfitsupply]

You have to reach your hand in between the headliner and the ceiling/roof. If you have a partition installed, this may be pretty tight.

[@RooftopViewAssembly]

@@upfitsupply I was able to figure it out. I appreciate your video and your help.

[@southpark159753]

How do I find out if its LWB or SWB?

[@upfitsupply]

Check this video out for how to determine your wheelbase: th-cam.com/video/TpS8LPi9szQ/w-d-xo.html

[@southpark159753]

Its on the back of the van lol, my bad

[@MrSage1221]

Can this work on an nissan nv200

[@upfitsupply]

Yes, just a different kit for the NV200: upfitsupply.com/product/vantech-h1-ladder-roof-rack-for-nissan-nv200/

[@mominkadir9372]

Is there any difference between is H33 And H31

[@upfitsupply]

H32 & H34 are used on the Transit Connect. There is a difference with the height of the crossbar mount. Usually the middle uprights/bar sit a little lower to account for slope in the roof so that your ladders will sit flush when spanning across 3 cross bars.

[@mominkadir9372]

I have brought those sets and opened the box and those got mixed up hard to figure it out which one is going in the middle

[@mominkadir9372]

Question what year of the ban you are working on?

[@mominkadir9372]

Van

[@upfitsupply]

This is a 2016, but it will be the same for 2014+ models.

[@damienroberts4791]

666 on the plate lol 😂

[@upfitsupply]

I literally just noticed that. Selling van now! 🤣