How to Install an Auto Dimming Rear View Mirror | how to attach rearview mirror to windshield

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ม.ค. 2020
  • how to attach rear-view mirror to windshield?
    If your car dose not have an auto dimming rear-view mirror do not doubt it to replace with an Auto dimming one.It's not expensive and I promise you it's worth it.
    The auto-dimming rear view mirror offers greater safety when driving at night, as it stops you from being dazzled by traffic traveling behind. It consists of a mirror element and an electronic system that detects light from in front and behind by means of photo sensors. If the amount of light from behind is greater than that in front, the mirror is darkened. The surface of the mirror features a layer of electrolytes, similar to the LCD display of a mobile phone. The electrolytes consist of uniform crystals. When a voltage is applied, the crystals arrange themselves at a given angle, determining how much light is reflected. The strength of the voltage determines to what extent
    auto, dimming, rear, view, mirror, glass, glare, driver, night, light, sensor, photo, ion, storage, electron, electrolyte, voltage, liquid, layer, darken, transparent, opaque, reflect, ambient, tailgater, high beam, HID, oncoming, Gentex, technology, toyota, mercedes, bmw, audi, jaguar, lexus, infiniti, automotive, car, side, electric, control, system, explain, inside, how, works, smart, tungsten, oxide, chemical, reaction, oxidation, material, current, opacity, circuit, chromic, chromatic, electro, compass, replace, windshield
  • ยานยนต์และพาหนะ

ความคิดเห็น • 78

  • @isreeramotar3868
    @isreeramotar3868 ปีที่แล้ว +4

    I have to give you props for the installation, but your way of cleanliness is beyond me. Why not use a heating gun to begin with 🤔🤔🤔

  • @AmongUs-mb4qx
    @AmongUs-mb4qx 3 ปีที่แล้ว +8

    This is a very good video actually, people are complaining because it's beyond their skill level. The video is here for people who can take up such DIY not for newbs, sorry but it had to be said. I would recommend using scotch locks instead of splicing the wires though.

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +1

      Thanks for comment

    • @Nmiguy
      @Nmiguy 6 หลายเดือนก่อน

      So only phd’s go to TH-cam?

    • @AmongUs-mb4qx
      @AmongUs-mb4qx 6 หลายเดือนก่อน

      @@Nmiguy ???

  • @dnasty981
    @dnasty981 9 หลายเดือนก่อน

    Where did you get mount that was compatible with the rearview mirrow? I cannot find a mount for my rearview mirror, it looks similar to yours.

  • @ashutoshrambade653
    @ashutoshrambade653 3 ปีที่แล้ว +1

    Good video

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว

      Thanks for your comment.🙏🙏🙏🙏

    • @ashutoshrambade653
      @ashutoshrambade653 3 ปีที่แล้ว

      @@bestofmyexperience2820 btw which car is this, I have to get install in baleno delta, but facing wiring issue

  • @Nmiguy
    @Nmiguy 6 หลายเดือนก่อน

    Would like to see the look of the exposed wiring.

  • @bhaskerch590
    @bhaskerch590 3 ปีที่แล้ว +5

    instead of cutting wire, you could have used or made 1 input 2 output connecter.

  • @rickduncan362
    @rickduncan362 7 หลายเดือนก่อน

    I believe I have the same mirror as you. 7 pins to connect. I like this video but I need the connector for the rear of the mirror. Also, my mirror shows the outside temp. Does your have this function?

    • @bestofmyexperience2820
      @bestofmyexperience2820  7 หลายเดือนก่อน

      Hi mine doesn't but if you can't find it there's no need for it just find the pinout from google and connect the wire

  • @mdwajahatansari786
    @mdwajahatansari786 3 ปีที่แล้ว +1

    If accidently the irvm is left powered on then it will drain a lot of battery. Is there any solution so as to supply the power from acc?

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว

      Well some cars maybe.
      Yes of course you could find any wire (+12V) that maintain voltage with ACC but you should do wiring.
      Also these rear_view mirror's battery usage is neglectable and won't make any difference

  • @spiroskosteletos3574
    @spiroskosteletos3574 ปีที่แล้ว

    could you tell us which pin on the mirror is the +12v and the negative?

    • @bestofmyexperience2820
      @bestofmyexperience2820  ปีที่แล้ว

      Is your mirror the exact as mine?
      If not so you have to finde the exact part as wiring may be deferent.

  • @Vikramsinghjangra
    @Vikramsinghjangra 3 ปีที่แล้ว +1

    Well represented, I want in my Tiago,
    1. Kya Tiago mein same wiring system hoga means 4 wire in roof?
    2 Tiago ka Kahan se purchase hoga?
    3. Price for new Tata genuine or good company?
    4. Dash ke sath aata h wo kaise h , already have display and rear camera?
    Reply please

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +3

      2wire is needed, more wire is for other options like temperature or GPS or...
      You can find used one in ebay about 30$
      I could not understand other sentences, sorry😓

    • @Vikramsinghjangra
      @Vikramsinghjangra 3 ปีที่แล้ว

      @@bestofmyexperience2820 original Tata ka kitne ka aata h ,Kahan milega kl,koi app,
      Kuch mirror display, dash cam ke sath bhi aate h ,kya wo lgana shi h, meine already back camera or stereo lgwa rakha h, ya dashcam alaga se shi rhega lgana, dash cam bhi aese hi lgege kya sir?

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +2

      Would you please use English?

    • @Vikramsinghjangra
      @Vikramsinghjangra 3 ปีที่แล้ว

      @@bestofmyexperience2820
      1. How much cost a an auto irvm of Tata originally, and where will purchase agency or any other app?
      2. Some irvm come with display in half and irvm in second half with dash cam and rear parking camera, is it good to buy them or connect dash cam separately, I already have stereo display and rear parking camera in my car.
      3 and for separate dashcam , does wiring also be done from same roof light?

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +1

      Well I really don't know your car but these Mir ors are multipurpose and you can buy from eBay
      As I said before for operation of the basic mirror you need ground wire and 12V wire that you can use from roof light but if you purchase any mirror with more option then you may need extra wiring from dashboard like reverse parking trigger signal and....

  • @2thepoint325
    @2thepoint325 3 ปีที่แล้ว

    Did you connect it with constant 12V?

  • @muradturanov5045
    @muradturanov5045 4 หลายเดือนก่อน

    What’s the link for it? For this mirror

    • @bestofmyexperience2820
      @bestofmyexperience2820  4 หลายเดือนก่อน

      I didn't had the link so I made that with some female single pin

  • @ak-pulkaal-kuwait7743
    @ak-pulkaal-kuwait7743 2 ปีที่แล้ว

    You didn't show pin connection in mirror! It was important information for me

    • @bestofmyexperience2820
      @bestofmyexperience2820  2 ปีที่แล้ว

      You should search your mirror no and find out the exact pin no. It is not identical for all unless the exact one at this video.

  • @marcogarofalo6343
    @marcogarofalo6343 ปีที่แล้ว +1

    Im doing this to my honda but I dont like the permanent live the mirror will be on all the time, I don't like that.

    • @bestofmyexperience2820
      @bestofmyexperience2820  ปีที่แล้ว

      There is nothing to worry about. There is a fuse in series with the wires.

    • @marcogarofalo6343
      @marcogarofalo6343 ปีที่แล้ว +1

      @@bestofmyexperience2820 my concern is about the drain on the battery and also damage to the mirror over a period of time

  • @professorgajenderkumarbhar7933
    @professorgajenderkumarbhar7933 ปีที่แล้ว +1

    Kaya aap meri Tata Safari dicor mein bhi laga sakte hai

  • @gowrisankarc1049
    @gowrisankarc1049 3 ปีที่แล้ว +1

    Can you say how it works ?

  • @shahrulazrik9773
    @shahrulazrik9773 2 ปีที่แล้ว +2

    No earth wire?

  • @DineshKumarNayak
    @DineshKumarNayak 2 ปีที่แล้ว

    Will heat works on all car to remove the stock bracket

  • @curiosity2314
    @curiosity2314 10 หลายเดือนก่อน

    Why would you want to tap into constant 12V supply creating a parasitic drain?

    • @bestofmyexperience2820
      @bestofmyexperience2820  10 หลายเดือนก่อน

      Sorry I didn't get what you mean

    • @curiosity2314
      @curiosity2314 10 หลายเดือนก่อน +1

      @@bestofmyexperience2820 The power supply should be switched so you don't drain the battery with a "parasitic drain, key off and power still supplied to the unit" .

  • @ajaysinhvainsh3269
    @ajaysinhvainsh3269 ปีที่แล้ว +1

    It has rear view camera ?

    • @bestofmyexperience2820
      @bestofmyexperience2820  ปีที่แล้ว

      Mine did not have but you can buy that one. But I have installed with rear view input and a 3.4 inch display inside the mirror it was not satisfying

    • @ajaysinhvainsh3269
      @ajaysinhvainsh3269 ปีที่แล้ว

      @@bestofmyexperience2820 I have it,but I didnt know to how to connect

  • @avinashswarnakar680
    @avinashswarnakar680 4 ปีที่แล้ว +1

    Where can I buy

  • @statusguruji3949
    @statusguruji3949 4 ปีที่แล้ว

    Cost?

  • @bhaskerch590
    @bhaskerch590 3 ปีที่แล้ว

    warranty voided for electrical equipment in the car...

  • @nitishgoel3969
    @nitishgoel3969 3 ปีที่แล้ว +4

    3:07 bas warranty khatam 😑

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว

      I didn't get what you mean?

    • @nitishgoel3969
      @nitishgoel3969 3 ปีที่แล้ว +1

      @@bestofmyexperience2820 i meant ki agar nayi gaadi mai meine taar kaat ke isse connection de dia toe warranty khatam ho jayegi

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +1

      !!!!!?????

    • @nitishgoel3969
      @nitishgoel3969 3 ปีที่แล้ว +1

      @@bestofmyexperience2820 🙏

    • @ayklization
      @ayklization 3 ปีที่แล้ว

      @@bestofmyexperience2820 he is saying, warranty will be void in case of such alteration to wiring.

  • @robbajko1533
    @robbajko1533 3 ปีที่แล้ว +4

    What a hack job!

  • @11superstar1997
    @11superstar1997 3 ปีที่แล้ว +1

    So much of this gives me anxiety. This is high skill paired with sloppy craftsmanship. How do you expect anybody to replicate this? These DIY's are meant to be useful to the public. This was sloppy

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +2

      Thanks

    • @danstheory4164
      @danstheory4164 3 ปีที่แล้ว +1

      I cringed when he used lighter on the plastic holder, definitely damaged the factory tint.
      Wiring is bad as well(It would be constantly drawing current even when engine is off), absolute piss poor job really.
      If you want to DIY, just tap ACC wire behind the stereo unit and use any ground wire.
      This prevents current draw when key is not inserted.

    • @bestofmyexperience2820
      @bestofmyexperience2820  3 ปีที่แล้ว +1

      Well thanks for your comment.
      The holder was not plastic (It was metal).
      Any ACC Wire has Fuse so there is not any differences between mine and yours.
      Please keep in mind :
      Before doing any job with any car wires YOU SHOULD REMOVE NEGATIVE BATTERY TERMINAL .

    • @isreeramotar3868
      @isreeramotar3868 ปีที่แล้ว

      Heating gun was more appropriate, not open fire 🔥 flame 😂😂🤔🤔sloppy as shit😮