Nice build!! Try the same with a 2.9 litre 24V BOA, it's 'the same' engine. I guess you could put the exhaust/turbo setup on with a little modification, and the 24V DOCH would make the engine breathe alot better. I know they sell this setup, for the BOA in England, but your build looks more awesome than any off the shelf product! Nice work
Well done! Awesome, like to see such an effort for a unique Sierra. I did the way with 2jz engine. I can imagine how hard it was. Congrats and I hope you still have fun and enjoy.
Great build!! I'm building a hot cologne V4 for my Saab rally car and was wondering if you put a receiver groove in the block for the separate head gasket flame rings you used?. I have some copper ones that I would like to use but don't want to machine the block if necessary. Nice rocker arms, I have been thinking about making some for awhile but haven't gotten around to it yet.
Hi! I used to start the groove in the block for copper rings, but it did not work on this machine. I moved later to use 1.2mm steel wire and this 0.9mm groove under the standard folding ring. It was the most effective solution. Pete
hi brill job hat off to you my friend ,how many hours do you think you have in the lump and whats the numbers has she been dyno'd yet? and what the comp ratio on the piston's (you drop it any?)+how much boost are you running all the time a bar and a half whats she like at 3 and a half? once again awesome
Thank you for your nice comment and when you looked at, maybe someday build a killer machine (boa or Bob), but this was my dream, which I carried out all the hard way. (sorry for the bad language)
Great work! Im also at the same projekt at the moment and i want to ask if you want to sell the torque plate you used to hone your engine block. Or maybe borrow it. Best regards Dennis
Nice build!! Try the same with a 2.9 litre 24V BOA, it's 'the same' engine. I guess you could put the exhaust/turbo setup on with a little modification, and the 24V DOCH would make the engine breathe alot better. I know they sell this setup, for the BOA in England, but your build looks more awesome than any off the shelf product! Nice work
Well done! Awesome, like to see such an effort for a unique Sierra. I did the way with 2jz engine. I can imagine how hard it was. Congrats and I hope you still have fun and enjoy.
Que gran trabajo amigo...yo también tengo un Ford Sierra pero ni se compara a este :)
The Ford Sierra is A dream..
huge amazing divine work!!!!!
THIS IS A MASTERPIECE of mechanical ART!
¡Gracias! Y una buena selección de coche que tienen, también!
Nice work. It has got a lot of goodies :D What diff are you used for it?
8.8” IRS
incredible machine skills. awesome work.
AWESOME!, love the mods!
Good work !!!
Wow V6 Twinturbopower
Great build!! I'm building a hot cologne V4 for my Saab rally car and was wondering if you put a receiver groove in the block for the separate head gasket flame rings you used?. I have some copper ones that I would like to use but don't want to machine the block if necessary.
Nice rocker arms, I have been thinking about making some for awhile but haven't gotten around to it yet.
Hi!
I used to start the groove in the block for copper rings, but it did not work on this machine. I moved later to use 1.2mm steel wire and this 0.9mm groove under the standard folding ring. It was the most effective solution.
Pete
nice mods
hi brill job hat off to you my friend ,how many hours do you think you have in the lump and whats the numbers has she been dyno'd yet? and what the comp ratio on the piston's (you drop it any?)+how much boost are you running all the time a bar and a half whats she like at 3 and a half? once again awesome
Thanks! I do not know how I've done, but it is just an awful lot. Run 1.5 bar all time. The compression ratio ~ 8.0. Shoot-out only 509ps and 675 nm
excellent
Thanks!
thats pretty awesome, are those stock heads?
Thank you for your nice comment and when you looked at, maybe someday build a killer machine (boa or Bob), but this was my dream, which I carried out all the hard way.
(sorry for the bad language)
Hyvä! ;)
Great work! Im also at the same projekt at the moment and i want to ask if you want to sell the torque plate you used to hone your engine block. Or maybe borrow it. Best regards Dennis
Thanks, Dennis!
I live in Finland if you pay for shipping I can sell one of them.
Pete
Yes,I Can.
Thanks! =)
Thanks! =D
Yes. You can find link engine pic, this video information.
So how exactly is this arranged? 1 turbo for each side of the engine or is it done differently?
What is size of rims? Cose i`ve got same but 15s in my Sierra.
Yes
7,5"x17 and offset 35
it surely has over 600hp !
Is the Sierra still alive?
Yes, of course! New engine 3.5 cyclone tt and Zf 6speed gearbox
@@pm00633 I am very happy to hear that! That makes me happy 😎. Greetings from the Highlands of Scotland
This is porn to my eyes !
Nice work ! :))
hifki bongattu
😎