2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces) 2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
I'd love to have a garage that is bigger, to support my growing hobby. LOL. Although somebody else in the house would like it if I settled on a smaller garage, and downsized the hobby. I'm not ready for that, yet. LOL.
Great build, thank you! Love the tip about supporting the top-frame to bottom-frame with the addition of those extra two-by-fours. (and that tool you used for drilling the diagonal-holes....I think I must find one of those for my collection. Home Depot, here I come!)
all yall doing jobs like this and then saying you're no carpenter makes me feel worthless. i wouldnt be able to do that half as well and i consider myself handy. great work.
Thank you. For me, it came down to supporting my hobby on a budget. So, to keep buying more aquariums, I have to build my stands to manage my cost. LOL... Plus I like them a little bit more heavy duty.
I have a question about the front of the stand. Originally, you were going to put vertical support boards to support the top and bottom horizontal boards. But, instead, it appears you removed those front verticals so you could inset the cabinet doors, right? Are you okay with the fact that the top and bottom boards are no longer supported for the weight of the tank's water?
Yes. This size stand doesn't require the center supports. It's heavy duty as is. Thanks for the excellent question. The tank and stand are still going strong. But, for sure, if I make a 6 foot stand, I would put a center support in.
I did the same with my 90g. Except for the top and bottom frame, instead of using 1.5x3.5, I ripped it down to 1.5x3, that way I can get an extra 1” opening for the cabinet space.
I just got a 75 gallon tank and am looking for a decent stand, but they are expensive for questionable strength. I may try this as your instructions are clear. One thing thought, at the end you talk about leveling it out...what did you do to adjust that? Thanks for this video.
That's an awesome job. Is it still holding up after a few years? Only thing I would've done was maybe add some concave molding inside the door frames to dress it up a little.
Zero issues. It's been up and running for a long time now. I'm a firm believer that if you support all four corners firmly, you'll be fine with the rest. Good luck. 👍
Great Build!! First thing I saw was your Cedar Point Shirt!! I’m in Michigan too. Any chance I could get you to build a 75 and 55 Stand for me? I don’t have any way of building these. I live in an Apartment. If you could please let me know.
Hi Gebo I'm not sure but in the instructions for cutting the 2×4.Where it says "cut 6 pieces at 16.5 inches.I wanted to know if its actually to cut 6 pieces at 19.5 inches?I'm a novice at this but I want to follow your blueprint but I wanted to absolutely correct.
You have to take into account, the width of the other boards being about an inch and a half, and there is two, so that why there is a 3 inch deduction in the size of the board you cut. Hope that's helpful.
I don't have an exact estimate in cost because there has been such significant price changes in lumber since this was built. I think it was around 50-60 bucks for material when I built it, though.
@@GebosGarage i can confirm it's still around that price at lowes just built it this past weekend, spent $60 with the screws, Also thanks for the step-by-step made it a simple DIY. Quick question, do you remember the size you cut the 1x4s for the door frame?
@yaTuSabee I'm sorry, I do not recall. I cut the door panel to fit the opening and then I cut the trim/frame to fit that. Good look. I'm happy you stopped by the Channel and are tackling this project! More to come from us, soon, too!
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces) 2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
You said you had to level it out once tanks was on top of stand in basement. I assume it was naturally level on your floor? Or what did you have to do to level the tank and stand when they are square already?
I then shim as appropriate, under the frame (the four corner legs). Usually I have to shim 3 sides, believe it or not. But once it's level, it's good forever. I level with the tank on the stand. I use a small pry bar to help lift the corner of the stand while watching the level, and I add the appropriate size homemade shim.
You can customize the size of the boards you cut to match any size aquarium you'd like. To me, that's the best part of building them, so you can do exactly what you want. Good luck to you.
For the top, that the aquarium sits on (the flat board OSB) I think I just tacked it down with air nailer. I'll have to go back and see if I pre-drilled holes and used screws on the top. But for the frame, I used 2 inch deck screws.
Looks great I'm getting ready to try my 1st stand build and hope I don't mess up. My biggest question is what about staining the wood and creating water resistance if you want to go the stain route
My neighbor is a professional (industrial) painter. He taught me that everything gets covered in some kind of protection. If you paint, you covered the entire project (underside) even the places where you can't see. I think staining is a great option, too. You can always add a clear coat over whatever you use to give it that extra protection. But really, you may not even need to do that. Our goal is to keep water in the tank, not on the stand. So very minimal water ever touches it. Maybe during a water change if not careful, or if a fish splashes. But truthfully, the stand will stay pretty dry. I use regular non-treared 2x4's and a cheap 4x8 sheet of OSB. They have help up well for years. Good luck with your project! I'm sure whatever you decide to do, it will turn out great! Now you've got me thinking about staining my next stand build. :-)
Hi, such an impressive build. I’m going to be building a stand for my half moon 190L (about 50 g I think). If I made a stand like this, (rectangle) can I then cut a curved panel from a wood panel to put on the top with the edges hanging over for the tank to sit on? Probably no more than 2-3 inches overhang. Is overhang ok on this size tank? 🇦🇺❤️
The rule of thumb that I use is that you want to support the aquarium on all four corners. Yours only has two corners on the back edge while the front edge is curved. It's possible that with a thick sheet of plywood, it could support the overhang, but I've never tried it. Good luck.
Awesome build. My wife and I are trying to build one for our turtle tank! I was wondering you could tell me the exact numbers and sizes of what you bought and the cut sizes for each part. Was hard to follow on the video! Thanks man
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces) 2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
I am 1/3 complete, Few Questions ... Did you use 1 1/4 corse screws for the cabinet pocket screws? Are those 1x4 for the cabinet doors? What size nails did you use to attached the board to the cabinet door frames? Is the missing 2 supports in the front a problem? Is that a nail gun, or staple gun ? if so what kind? Thanks A million!!
I used the Kreg Pocket Jig with the screws provided in the screw kit, also by Kreg. They were 1 1/4 with the flat heads, specifically for the pocket holes, although I'm sure a regular screw would work, too. Yes, 1×4 boards for the doors I used a Brad nailer that shoots both staples and nails. I don't remember if I used Brad nails or staples on this project as I have used both in other stands I've built. I got them both at Harbour Freight for cheap. The two support boards in the front were omitted to make space for the cabinet door. I'm comfortable with that because I have the 2x4's support on the outer edge (both side), so for sure it will hold, no problem. I'm happy with this DIY stand and it's one of my favorites. I built another one, and I added the supports in the front, not for structural support, but more to even out the look. I didn't make a video about that stand, but it's the stand in the video about the 110 tall tank I bought. You can see the other stand there.
Yes, if we are talking about the same thing. I used the brads and or staples only to affix the back panels of the cabinet doors, and to affix the side planes to the sides of the stand.
Well, they say each vertical 2x4 can hold 1,000 pounds each.... this stand has eight vertical 2x4's. So, although it's not scientific, I'll say it can hold a lot.
I used wood shims to level.... 2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces) 2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
2x4. Cut 4 peices to 49.5 inches. This is for the top and bottom frame. (The front and back peices) 2x4. Cut 6 peices to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
good video, just a tip for next time though. something else you could do is instead of filling the pocket holes with the dowels and having them on the front, flip it over and put it on the back side that is against the plywood. You painted it so it doesn't matter but if you were going to stain it or something of that nature it helps hide things of that nature that tend to bother some people. Like I said before though good video!
I bet you know what happened here... LOL, I drilled the wrong side initially but didn't show it in the video. (Sigh). But it worked out in the end for which I am happy.
I actually just started using caulking. I dab it on, then smooth it out with a flat edged peice of plastic or a putty knife and then I paint over it. You can also use wood putty, but I didn't have any.
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces) 2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
3:51 and on ... Where do I start? The OSB with the aquarium with gravity adsorb the weight. those screws you are pointing to are holding the top together they have nothing to do with the legs ... that bottom frame could be eliminated by using a single or X cross base on the back legs ... over built and a waste of material for what it is.
Thanks for the critique, Barry. I don't disagree with your points. The stand is over built, by design. I don't recommend OSB, but compared to expensive plywood, it was an acceptable alternative. The stand is holding up very well over time and I'm building another one just like it, right now. Although, with the revenue from these videos (thanks to viewers like you), I can probably splurge on some actual plywood, this time around. Thanks for stopping by and for your constructive feedback. I hope you visit the channel again, soon. Check out my latest video here: th-cam.com/video/SxjcHOlc5Gc/w-d-xo.html
Sorry, Doug. I'm just seeing this post. I used 1x3 for the door trim, and I can't remember the actual size of the doors. But because of your question, I will include this information in my next tank stand video which is coming up, soon.
Hey awesome setup nice video ... quick question. if you were building this for a 55 gallon tank would you make the sides of the top and bottom of frame, and the middle support , for both frames 10.5 inches? thanks
Thank you! So, the 55 gallon is a 12 inch wide tank and my 75 is 18 wide, so I would shorten the length to accommodate the narrower tank. Remember there is about an inch and a half on each side that you have account for, so add 3 inches to the 10.5 and that will give you plenty (13.5) of space, in my opinion.
@@GebosGarage thank you. One other comment. I noticed the door sits flush with the stand. Is this because you didn't put the extra braces on the front like you did on the back 2 corners? I heard you say you were going to put extra braces but only saw you do it on 2 of the 4 legs. Am I mistaken?
Excellent eye. Yes, I decided I wanted the door to be flush, so instead of the additional 2x4's in the front, I used 1×2's instead. I did this to continue the support, plus, I like how it looked. Oh WAIT... Actually, I did that on another stand buid. THIS ONE I DID NOT ADD ANY ADDITIONAL SUPPORT TO THE FRONT. But it would still be a good option.
@@GebosGarage So I have my stand made. Another question. What's between your floor (hardwood or laminate?) and tank stand? Anything to protect from water and drips? Anything protecting the baseboard behind the stand?
If that's what you have, use it. You can paint over it. I wouldn't worry about it being pressure treated, other than it's more expensive wood. Good luck.
Did this stand hold up after all this time? I made my own using your instructions and I’m hearing the wood cracking. I even used extra 2 x 4’s in the middle for extra support so instead of the 12 support 2 by 4, I have 20. Should I be nervous?
My stand is supporting a 75 gallon with zero issues. It's solid. I wonder where or why you are hearing "creeking" noises? The key it to keep everything square, flush and level. I have 6 of these stands (various sizes) and each is holding up very well. I wish you good luck! 👍
@@GebosGarage I would attach photo but not sure how you do that here. I did it myself and I’ve never made anything myself. So as a female that never builds anything I’m nervous that I must’ve done something wrong and that’s why I’m hearing noise. I know a few of the wood pieces were splitting as I was building it.
Splitting? Did you pre-drill the holes where you placed the screws to hold the frame together, and where the legs attach to the frame? And, did you make sure you didn't place the screws to close to the ends of each board, which could cause splitting? If the 2x4 legs are supporting all 4 corners, and are attached securely to the rectangle frame, it should be good. These stands are over built. So, in theory, if you have the 4 legs properly attached with long enough deck screws, the weight of the aquarium is transferred from the top of the stand, down the legs and to the floor. The four 2x4's alone are more than strong enough to support the weight of a 75 gallon tank, but I like to add the additional supports for peace of mind...
@@GebosGarage I didn’t pre-drill the holes and the screws should be far enough apart I think. I added the extra two to each leg as you stated and then I added 6 additional beams in the middle. Maybe the noise is just from the splits it already had and I need to stop worrying. This literally kept me up all night. I don’t know why I thought I could successfully do this alone.
Yeah, I get being worried about the tank being properly supported. That's why I like to build my own. It sounds like you did a good job, though! You probably have nothing to worry about... other than a little self doubt about the project. We've all been there. I bet it's fine and will give you years of aquarium enjoyment!
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces) 2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames. 2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames. 2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame. 4x8 sheet of OSB. Cut to fit the top. Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs. Nail these in place. I did not use a center brace (leg) on this stand.
Maybe $40 or so? 2x4's are around $3 ea. I used eight total in the making of this stand. Then, a 4x8 sheet of OSB wood I used for the top was around $10 and I had leftover to use on another job. Then, the thin 4x8 sheeting I used to wrap the stand, I already had in the garage, but a full sheet of that was around $20 or so. Then a box of deck screws cost another $13. But some of this stuff I already had from previous stand materials. I hope this is helpful.
liked the cabinet doors in the 2 tone wood before ya painted it black but still turned out awesome! good work! Is your aquarium drilled and are you running a sump? :)
Thank you. Yes, I like the two-tone as well, but wanted the stand to match the rest. As for the salt water set up... well, I literally (8 days ago) added salt, and a few days after that, I added two fish. The tank is not drilled and I do not have a sump. I am doing a fish only tank as this is my first go at saltwater. I am happy to report that the salinity is 1.025 and it's looking good so far. There will be an update video as soon as I gather all the footage.
No, but I do have plans to build a stand for 2 tanks that I just picked up. Both are 24x24x12. I'm looking forward to that build. Good luck with your 37x15 stand. Come back and show us pictures of the finished job!
Awesome build! So perfectly simplified but comes out looking like expert craftsmanship - far better than PetCo for $250! Would you mind sharing the cost of materials please? Thanks again for a super educational video! LOVE Cedar Point! :)
@@GebosGarage So do I just take a(3) 16 ft 2x4 to the back in Lowes and ask them to cut it like you posted above? I do not know how to do those wood doors - do you think it needs that? your stand looks stronger and better than anything I have researched online, in stores, or at fish places and is 1/3 price
Thanks. The cost wasn't bad. But I built them back before COVID and before the price of lumber shot up. I think 2x4s were less than $3 back then. I want to say there's less than $50 in material. Of course some things I had on hand already.
Oh no! I'm sorry you ran into hiccups. Hopefully, you've got it built now and an aquarium up and running on it! I see I'm a couple of months late in seeing this comment.
Hey Gebo. As always, I really enjoy your video. The DIY stand looks killer.. and stunning black color. Wow!! The side pocket job was accurate.. By the way for supporting gallons of water, Why don't you use rear support? I mean need a single beam of wood at back.. Sorry but can't imagine a tank stand without back pillar... :-) All positive bro, love your jokes too..
I bought everything at Lowes or Home Depot and I spent about $50. Of course that was back when 2x4's were around $2.80 each. They have gone up since the Corona Virus to almost double that around here. I just built some shelves in my laundry room, and when I went to buy the material, I was like whoa!
So, the video is coming soon. I literally just added my first two saltwater fish to the aquarium... the cycle begins!!!! I'll post an update video soon!
I might trust it if I didn't have to shim the stand to level in on my floors. But I have to use large shims, and I just feel better knowing I'm using heavy duty stand with 2x4, that I know can support the shim and weight of the aquarium without buckling the stand.
I'm building the canopy for this one next. I am going to make a few modifications from the last one I made. For example, instead of a removable front panel, I am going to do a hinged panel, I think. We shall see.
@@GebosGarage I was thinking of doing hinges on the one you made for my tank. Maybe putting a 8 inch hydraulic arm on it to hold it up while doing water changes??
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces)
2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
You’re the man 🙌🏽
Pretty good. God bless you and ur loved ones too
Thank you.
I have no idea what I'm doing, but followed these directions and built a decent stand. Thanks for the video!
Thanks Kevin. That makes me feel good! Truly. Enjoy the hobby! More aquarium hobby videos coming...
Great job
Thank you
Great, simple design!
Thank you! Cheers!
Excellent work
Thanks for the visit
You look like me after a well done project, very proud!
Indeed. Thank you!
Good job
Thank you
Thank you so much for sharing!
Thank you for visiting the channel. Hope to see you back again!
Great video!!!!
Thank you!
Wow I’d love a garage that big lol
I'd love to have a garage that is bigger, to support my growing hobby. LOL. Although somebody else in the house would like it if I settled on a smaller garage, and downsized the hobby. I'm not ready for that, yet. LOL.
Impressive. Enjoyed watching this build.
Thank you my friend.
Wow great job I need to build one . Thanks for the video 👍
thank you
Cedar Point is a child's dream. Full of roller coasters and ice cream!
Thanks for dropping by the channel. Season ticket holders! LOL.
@@GebosGarage pretty sure we are neighbors then. I am about 30 minutes away from Sandusky. :)
Great build, thank you! Love the tip about supporting the top-frame to bottom-frame with the addition of those extra two-by-fours. (and that tool you used for drilling the diagonal-holes....I think I must find one of those for my collection. Home Depot, here I come!)
love it
Thank you!
all yall doing jobs like this and then saying you're no carpenter makes me feel worthless. i wouldnt be able to do that half as well and i consider myself handy. great work.
Thank you. For me, it came down to supporting my hobby on a budget. So, to keep buying more aquariums, I have to build my stands to manage my cost. LOL... Plus I like them a little bit more heavy duty.
great job
Thank you
Nice job thanks
Thanks for the comment.
Looks great and I appreciated the humor lol
Thanks for stopping by to check out the video and for taking time to leave a comment! Happy Holidays ahead!
Hey gebo me again how are ya..any ideas on good brand stains and poly?
I use the Minwax brand that you get at Home Depot. For my little projects, it works fine.
I have a question about the front of the stand. Originally, you were going to put vertical support boards to support the top and bottom horizontal boards. But, instead, it appears you removed those front verticals so you could inset the cabinet doors, right? Are you okay with the fact that the top and bottom boards are no longer supported for the weight of the tank's water?
Yes. This size stand doesn't require the center supports. It's heavy duty as is. Thanks for the excellent question. The tank and stand are still going strong. But, for sure, if I make a 6 foot stand, I would put a center support in.
I did the same with my 90g. Except for the top and bottom frame, instead of using 1.5x3.5, I ripped it down to 1.5x3, that way I can get an extra 1” opening for the cabinet space.
Ah, very good advise! Thanks!!!! I am working on a new stand now. I appreciate the tip.
Hi,
Could you make an iron framing stand with an outer wooden body for nice looks be cabinet
I don't work with iron or welding. But I am sure it can be done.
That looks great 👍
Thank you.
Ok tank is 48×19 so you are build inch & half lonh & deeper right? thx you
I did, for personal preference. You can build them to exact fit of you like it better. This just worked out for me.
Well done!
Thank you.
Good job for a DIY'er. Looks very nice sir.
Thank you.
I just got a 75 gallon tank and am looking for a decent stand, but they are expensive for questionable strength. I may try this as your instructions are clear. One thing thought, at the end you talk about leveling it out...what did you do to adjust that? Thanks for this video.
LOL never mind...I just saw your previous answer.
Just getting around to see this comment. Good luck with the build. You will be happy you did it yourself.
Awesome build my guy. I’m gonna build it.
Do it! Thanks for visiting the channel
great job.
Thank you.
That's an awesome job. Is it still holding up after a few years? Only thing I would've done was maybe
add some concave molding inside the door frames to dress it up a little.
This stand is holding up great! And yes, my next stand I am going to try and make it a little more furniture grade (ish).
No center brace I see I wanna build something like this for a sump at the bottom. With only having the 4 corners the middle of the stand dint bow?
Zero issues. It's been up and running for a long time now. I'm a firm believer that if you support all four corners firmly, you'll be fine with the rest. Good luck. 👍
Great Build!! First thing I saw was your Cedar Point Shirt!! I’m in Michigan too. Any chance I could get you to build a 75 and 55 Stand for me? I don’t have any way of building these. I live in an Apartment. If you could please let me know.
If I didn't have so many projects in the works, I'd love to help. Thank you for asking though.
Hi Gebo I'm not sure but in the instructions for cutting the 2×4.Where it says "cut 6 pieces at 16.5 inches.I wanted to know if its actually to cut 6 pieces at 19.5 inches?I'm a novice at this but I want to follow your blueprint but I wanted to absolutely correct.
You have to take into account, the width of the other boards being about an inch and a half, and there is two, so that why there is a 3 inch deduction in the size of the board you cut. Hope that's helpful.
Looks nice 👍
Thanks! Still going strong. This aquarium now holds a saltwater Clown and Grouper!
Do you have an estimated material cost for this? Assuming you have the tools. Looks great appreciate the walkthrough.
I don't have an exact estimate in cost because there has been such significant price changes in lumber since this was built. I think it was around 50-60 bucks for material when I built it, though.
@@GebosGarage i can confirm it's still around that price at lowes just built it this past weekend, spent $60 with the screws, Also thanks for the step-by-step made it a simple DIY. Quick question, do you remember the size you cut the 1x4s for the door frame?
@yaTuSabee I'm sorry, I do not recall. I cut the door panel to fit the opening and then I cut the trim/frame to fit that. Good look. I'm happy you stopped by the Channel and are tackling this project! More to come from us, soon, too!
And the peace of mind!! The store bought ones are so flimsy and cheaply made, and I’ve never felt super confident with them.
Yes. It's all about the peace of mind.
What are the dims and quantity of the boards, loved the video gonna build it.
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces)
2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
Good job Sir. I wish you could build me a stand for one of my Aquarium . 👍
Thank you
Will this stand allow a 40 breeder tank to be used as a sump inside the stand?
That is a great, GREAT question. The answer is no, but you made me rethink my design. So thank you.
great job bro
Thank you
It looks great it looks like you bought it off of a store
Thank you.
Excellent build! Going to use this for my first 75g tank!
Do you by any chance have the measurements for the doors? Was that 1x4 for the door “frame”?
Yes, 1x4. Good luck! 👍
@GebosGarage do you have measurements for cabinet doors
You said you had to level it out once tanks was on top of stand in basement. I assume it was naturally level on your floor? Or what did you have to do to level the tank and stand when they are square already?
Basement floors pitch towards the floor drains. The stand is level, the floors are not.
@Gebo's Garage ok. Makes sense. How do you level something like that then? What did you use?
The basement floors are so uneven, I actually cut my own shims, various widths, from a scrap 2x4, using my chop/miter saw.
I then shim as appropriate, under the frame (the four corner legs). Usually I have to shim 3 sides, believe it or not. But once it's level, it's good forever. I level with the tank on the stand. I use a small pry bar to help lift the corner of the stand while watching the level, and I add the appropriate size homemade shim.
do you think i could at a later to make it hold a 40gal and a 75gal
You can customize the size of the boards you cut to match any size aquarium you'd like. To me, that's the best part of building them, so you can do exactly what you want. Good luck to you.
What size screws did you use to attach the top to the frame?
For the top, that the aquarium sits on (the flat board OSB) I think I just tacked it down with air nailer. I'll have to go back and see if I pre-drilled holes and used screws on the top. But for the frame, I used 2 inch deck screws.
Thankyou
Nice stand better then petco i would pay to build me one
Thank you
Did you just paint it with regular black paint?
Yes. Latex paint. The same stuff you would paint your living room wall with.
question what kind off wood did you ues
2x4's from Lowes or Home Depot.
Looks great I'm getting ready to try my 1st stand build and hope I don't mess up. My biggest question is what about staining the wood and creating water resistance if you want to go the stain route
My neighbor is a professional (industrial) painter. He taught me that everything gets covered in some kind of protection. If you paint, you covered the entire project (underside) even the places where you can't see. I think staining is a great option, too. You can always add a clear coat over whatever you use to give it that extra protection. But really, you may not even need to do that. Our goal is to keep water in the tank, not on the stand. So very minimal water ever touches it. Maybe during a water change if not careful, or if a fish splashes. But truthfully, the stand will stay pretty dry. I use regular non-treared 2x4's and a cheap 4x8 sheet of OSB. They have help up well for years. Good luck with your project! I'm sure whatever you decide to do, it will turn out great! Now you've got me thinking about staining my next stand build. :-)
Nice project, loved it. Congrats!
Why didn't you use the stop collar on the pocket hole drill bit?
Good catch. I forgot to put it on and it remained in the box.
Ooooh, can you make a matching top? One that opens?
It's on my list.
What kinda of paint did you use?
Latex. Regular paint that you would use on the walls of your house.
What size wood you use to make door frames thx you
I think it was 1x3
Hi, such an impressive build. I’m going to be building a stand for my half moon 190L (about 50 g I think). If I made a stand like this, (rectangle) can I then cut a curved panel from a wood panel to put on the top with the edges hanging over for the tank to sit on? Probably no more than 2-3 inches overhang. Is overhang ok on this size tank? 🇦🇺❤️
The rule of thumb that I use is that you want to support the aquarium on all four corners. Yours only has two corners on the back edge while the front edge is curved. It's possible that with a thick sheet of plywood, it could support the overhang, but I've never tried it. Good luck.
How many of 2×4 did u use
8
YUP, IM USING YOUR BLUEPRINTS
Awesome. I hope it turns out good for you!
@@GebosGarage sure did! If I could send some pics I would. I also enjoy wood working as well. Thanks again for the idea I chose👍🏼📌🔨🪚🪛🏁
Awesome build. My wife and I are trying to build one for our turtle tank! I was wondering you could tell me the exact numbers and sizes of what you bought and the cut sizes for each part. Was hard to follow on the video! Thanks man
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces)
2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
Does this fit a fluval FX4 in the cabinet?
I am sure it would, especially since I leave the back open on my stands.
I am 1/3 complete, Few Questions ...
Did you use 1 1/4 corse screws for the cabinet pocket screws?
Are those 1x4 for the cabinet doors?
What size nails did you use to attached the board to the cabinet door frames?
Is the missing 2 supports in the front a problem?
Is that a nail gun, or staple gun ? if so what kind?
Thanks A million!!
@@GebosGarage thank you
I used the Kreg Pocket Jig with the screws provided in the screw kit, also by Kreg. They were 1 1/4 with the flat heads, specifically for the pocket holes, although I'm sure a regular screw would work, too.
Yes, 1×4 boards for the doors
I used a Brad nailer that shoots both staples and nails. I don't remember if I used Brad nails or staples on this project as I have used both in other stands I've built. I got them both at Harbour Freight for cheap.
The two support boards in the front were omitted to make space for the cabinet door. I'm comfortable with that because I have the 2x4's support on the outer edge (both side), so for sure it will hold, no problem.
I'm happy with this DIY stand and it's one of my favorites. I built another one, and I added the supports in the front, not for structural support, but more to even out the look. I didn't make a video about that stand, but it's the stand in the video about the 110 tall tank I bought. You can see the other stand there.
th-cam.com/video/t2dZ5p34bTQ/w-d-xo.html
@@GebosGarage thank you !! Will both brad nails and staples work ?
Yes, if we are talking about the same thing. I used the brads and or staples only to affix the back panels of the cabinet doors, and to affix the side planes to the sides of the stand.
hey bud what kind of wood did you use for the 75 gallon stand
Pine 2x4's and OSB sheathing.
How much weight can one of these things hold
Well, they say each vertical 2x4 can hold 1,000 pounds each.... this stand has eight vertical 2x4's. So, although it's not scientific, I'll say it can hold a lot.
What are the sizes of all the boards? can you list them. how did you level the stand out.
I used wood shims to level....
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces)
2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
I'm a beginner at this but can I have the blueprint to this please. I adore this stand. Blueprint for tools too
2x4. Cut 4 peices to 49.5 inches. This is for the top and bottom frame. (The front and back peices)
2x4. Cut 6 peices to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
good video, just a tip for next time though. something else you could do is instead of filling the pocket holes with the dowels and having them on the front, flip it over and put it on the back side that is against the plywood. You painted it so it doesn't matter but if you were going to stain it or something of that nature it helps hide things of that nature that tend to bother some people. Like I said before though good video!
I bet you know what happened here... LOL, I drilled the wrong side initially but didn't show it in the video. (Sigh). But it worked out in the end for which I am happy.
@@GebosGarage hey it looks good either way! Like Bob Ross said, no mistakes just happy little accidents
Hello,, what do you use to cover screw heads so you wont see all the screw holes after you paint it? Thanks
I actually just started using caulking. I dab it on, then smooth it out with a flat edged peice of plastic or a putty knife and then I paint over it. You can also use wood putty, but I didn't have any.
@@GebosGarage thanks
How many pieces of wood that you cut to build that stand , may i know the measurement as well thanks sir
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces)
2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
3:51 and on ... Where do I start? The OSB with the aquarium with gravity adsorb the weight. those screws you are pointing to are holding the top together they have nothing to do with the legs ... that bottom frame could be eliminated by using a single or X cross base on the back legs ... over built and a waste of material for what it is.
Thanks for the critique, Barry. I don't disagree with your points. The stand is over built, by design. I don't recommend OSB, but compared to expensive plywood, it was an acceptable alternative. The stand is holding up very well over time and I'm building another one just like it, right now. Although, with the revenue from these videos (thanks to viewers like you), I can probably splurge on some actual plywood, this time around. Thanks for stopping by and for your constructive feedback. I hope you visit the channel again, soon. Check out my latest video here: th-cam.com/video/SxjcHOlc5Gc/w-d-xo.html
What are the measurements and supplies needed for the doors/sides?
Sorry, Doug. I'm just seeing this post. I used 1x3 for the door trim, and I can't remember the actual size of the doors. But because of your question, I will include this information in my next tank stand video which is coming up, soon.
Hey awesome setup nice video ... quick question. if you were building this for a 55 gallon tank would you make the sides of the top and bottom of frame, and the middle support
, for both frames 10.5 inches? thanks
Thank you! So, the 55 gallon is a 12 inch wide tank and my 75 is 18 wide, so I would shorten the length to accommodate the narrower tank. Remember there is about an inch and a half on each side that you have account for, so add 3 inches to the 10.5 and that will give you plenty (13.5) of space, in my opinion.
What stain color is this? I'd like to make one like yours.
Latex paint. Semi-Gloss black.
@@GebosGarage thank you. One other comment. I noticed the door sits flush with the stand. Is this because you didn't put the extra braces on the front like you did on the back 2 corners? I heard you say you were going to put extra braces but only saw you do it on 2 of the 4 legs. Am I mistaken?
Excellent eye. Yes, I decided I wanted the door to be flush, so instead of the additional 2x4's in the front, I used 1×2's instead. I did this to continue the support, plus, I like how it looked. Oh WAIT... Actually, I did that on another stand buid. THIS ONE I DID NOT ADD ANY ADDITIONAL SUPPORT TO THE FRONT. But it would still be a good option.
@@GebosGarage cool! 👍👍
@@GebosGarage So I have my stand made. Another question. What's between your floor (hardwood or laminate?) and tank stand? Anything to protect from water and drips? Anything protecting the baseboard behind the stand?
Can I use 2x4x8 pressure treated lumber?
If that's what you have, use it. You can paint over it. I wouldn't worry about it being pressure treated, other than it's more expensive wood. Good luck.
@@GebosGarage I have that one and another called 2 in. x 4 in. x 96 in. Premium Burrill Fir Stud.which would be better
Use the premium wood studs.
Looks great👏. What kind of paint did you use?
Regular Latex Paint :-) Cheap and easy - last a long time.
Hi, good video. What material do you use for this stand - plywood??
I used seven 2x4's and one sheet of OSB board for the top.
Did this stand hold up after all this time? I made my own using your instructions and I’m hearing the wood cracking. I even used extra 2 x 4’s in the middle for extra support so instead of the 12 support 2 by 4, I have 20. Should I be nervous?
My stand is supporting a 75 gallon with zero issues. It's solid. I wonder where or why you are hearing "creeking" noises? The key it to keep everything square, flush and level. I have 6 of these stands (various sizes) and each is holding up very well. I wish you good luck! 👍
@@GebosGarage I would attach photo but not sure how you do that here. I did it myself and I’ve never made anything myself. So as a female that never builds anything I’m nervous that I must’ve done something wrong and that’s why I’m hearing noise. I know a few of the wood pieces were splitting as I was building it.
Splitting? Did you pre-drill the holes where you placed the screws to hold the frame together, and where the legs attach to the frame? And, did you make sure you didn't place the screws to close to the ends of each board, which could cause splitting? If the 2x4 legs are supporting all 4 corners, and are attached securely to the rectangle frame, it should be good. These stands are over built. So, in theory, if you have the 4 legs properly attached with long enough deck screws, the weight of the aquarium is transferred from the top of the stand, down the legs and to the floor. The four 2x4's alone are more than strong enough to support the weight of a 75 gallon tank, but I like to add the additional supports for peace of mind...
@@GebosGarage I didn’t pre-drill the holes and the screws should be far enough apart I think. I added the extra two to each leg as you stated and then I added 6 additional beams in the middle. Maybe the noise is just from the splits it already had and I need to stop worrying. This literally kept me up all night. I don’t know why I thought I could successfully do this alone.
Yeah, I get being worried about the tank being properly supported. That's why I like to build my own. It sounds like you did a good job, though! You probably have nothing to worry about... other than a little self doubt about the project. We've all been there. I bet it's fine and will give you years of aquarium enjoyment!
what was the sizes for all the cuts that you made?
2x4. Cut 4 pieces to 49.5 inches. This is for the top and bottom frame. (The front and back pieces)
2x4. Cut 6 pieces to 16.5 inches. This is for the sides of the top and bottom frame, and the middle support, for both frames.
2x4. Cut 4 at 30 inches. These are the legs for the stand. These get nailed to the inside corners of the two frames.
2x4. Cut 8 at 23 inches, these will be the legs that squeeze in between the upper frame and bottom frame. They get screwed into the main legs. But give the additional support needed on the corners as they join the top frame and bottom frame.
4x8 sheet of OSB. Cut to fit the top.
Use the remaining OSB to cut out the shelf for the bottomed frame. Use a jig saw to cut out the corners so it fits around the legs.
Nail these in place.
I did not use a center brace (leg) on this stand.
@@GebosGarage thank you
Hey, obviously we're in different locations. But what's the ballpark cost of something like this?
Maybe $40 or so? 2x4's are around $3 ea. I used eight total in the making of this stand. Then, a 4x8 sheet of OSB wood I used for the top was around $10 and I had leftover to use on another job. Then, the thin 4x8 sheeting I used to wrap the stand, I already had in the garage, but a full sheet of that was around $20 or so. Then a box of deck screws cost another $13. But some of this stuff I already had from previous stand materials. I hope this is helpful.
Thank you so much for your video I just copied your stand looks great 😊
Awesome! Thank you!
liked the cabinet doors in the 2 tone wood before ya painted it black but still turned out awesome! good work! Is your aquarium drilled and are you running a sump? :)
Thank you. Yes, I like the two-tone as well, but wanted the stand to match the rest. As for the salt water set up... well, I literally (8 days ago) added salt, and a few days after that, I added two fish. The tank is not drilled and I do not have a sump. I am doing a fish only tank as this is my first go at saltwater. I am happy to report that the salinity is 1.025 and it's looking good so far. There will be an update video as soon as I gather all the footage.
@@GebosGarage waiting for that footage!!! lol You're a God send! God Bless you man
how did you level it
Wood shims.
Do you have plans on making a stand for a 50 gallon 37 x15 :)
No, but I do have plans to build a stand for 2 tanks that I just picked up. Both are 24x24x12. I'm looking forward to that build. Good luck with your 37x15 stand. Come back and show us pictures of the finished job!
Awesome build! So perfectly simplified but comes out looking like expert craftsmanship - far better than PetCo for $250! Would you mind sharing the cost of materials please? Thanks again for a super educational video! LOVE Cedar Point! :)
The price of lumbar has been up and down, but I probably have $80 in material. Thanks for catching my Cedar Point references! We love it, too.
@@GebosGarage So do I just take a(3) 16 ft 2x4 to the back in Lowes and ask them to cut it like you posted above? I do not know how to do those wood doors - do you think it needs that? your stand looks stronger and better than anything I have researched online, in stores, or at fish places and is 1/3 price
Only thing I’m thinking is what if someone flings the door next to the tank open?
The door hits the bottom of the tank stand. It doesn't reach the tank itself. That would be bad... for sure. lol
what did you use to level the stand?
Regular wood shims. My basement floor slopes towards the drain, so I did have to use some blocks I cut from 2x4s and then some Regular wood shims too.
nice video, how much did this cost in lumber?
Thanks. The cost wasn't bad. But I built them back before COVID and before the price of lumber shot up. I think 2x4s were less than $3 back then. I want to say there's less than $50 in material. Of course some things I had on hand already.
Ughhh the warping on the 2x4s is killing me on building the top and bottom frame, cant get flush and caused splits when force drilling them
Oh no! I'm sorry you ran into hiccups. Hopefully, you've got it built now and an aquarium up and running on it! I see I'm a couple of months late in seeing this comment.
What about for a 29 gallon
Same concept, cut smaller peices.
What are the dimensions for the doors?
I don't recall. But I will certainly include this information. In my next video. Thanks for asking.
Hey Gebo. As always, I really enjoy your video. The DIY stand looks killer.. and stunning black color. Wow!! The side pocket job was accurate.. By the way for supporting gallons of water, Why don't you use rear support? I mean need a single beam of wood at back.. Sorry but can't imagine a tank stand without back pillar... :-)
All positive bro, love your jokes too..
What’s was the cost of this build ?
I bought everything at Lowes or Home Depot and I spent about $50. Of course that was back when 2x4's were around $2.80 each. They have gone up since the Corona Virus to almost double that around here. I just built some shelves in my laundry room, and when I went to buy the material, I was like whoa!
@@GebosGarage thanks I’m building my First salt water aquarium in a 75 G as well. Did you ever did the video of yours ?
So, the video is coming soon. I literally just added my first two saltwater fish to the aquarium... the cycle begins!!!! I'll post an update video soon!
Looks good amateur! 😂😉 kidding, way better than I could do!
LOL. Thank you!
HOW MUCH FOR ALL MATERIAL!?
This was of course before the rise in material cost, but I think I've got $80 into it.
wish i knew someone near that would make one for m, i.d pay. this could be sold as a kit hmmm
Thanks! Glad you like it.
Cedar point is the best amusement park on the planet.
Love the sweatshirt! It's vintage!
I have the same issue right now. I don't trust what looks like the same exact stand
I might trust it if I didn't have to shim the stand to level in on my floors. But I have to use large shims, and I just feel better knowing I'm using heavy duty stand with 2x4, that I know can support the shim and weight of the aquarium without buckling the stand.
Should have filmed step by step
Next time I will do better.
Looks good! But mines better 🤣😂. Will have to follow your blueprint when I do my next aquarium builds!
I'm building the canopy for this one next. I am going to make a few modifications from the last one I made. For example, instead of a removable front panel, I am going to do a hinged panel, I think. We shall see.
@@GebosGarage I was thinking of doing hinges on the one you made for my tank. Maybe putting a 8 inch hydraulic arm on it to hold it up while doing water changes??