LATEST SWITCH FIRMWARE IS CURRENTLY NOT SUPPORTED (I'll update the links once support gets added.) Also, please read a written guide if this is your first time modding a switch and not a refresher PLEASE WATCH THE GUIDE I MADE IN MY DISCORD SERVER INSTEAD IF THIS IS TOO CONFUSING! Nintendo would take down the full video guide I made if I uploaded it to youtube so I put it in my discord server instead. discord.gg/zMzPbaXNWJ It is in the Guides channel. WILL MY SAVE DATA BE DELETED WHEN FORMATTING? - No. You will have to reinstall all your games on your stock firmware but your save data will NOT be deleted HOW DO I GO BACK TO MY NORMAL SWITCH? - You can either fully turn off your switch/restart it to go back to stock firmware, or inside the hbmenu (album) click "reboot to payload" and inside hekate launch you can choose "stock". When going back to your emunand/sysnand, repeat the steps used in the tegrarcm section of this video. MY SWITCH SAYS "POSSIBLY PATCHED" ON THE CHECKER WEBSITE. WHAT DO I DO? - You can still try to mod your switch. If your switch isn't patched, then you will boot into hekate using tegrarcm successfully. If it is patched, tegrarcm will not work. If it doesn't work, you will NOT brick your switch so there's no risk in trying. MY SWITCH SAYS "PATCHED" WHAT DO I DO? - You will need to install a modchip to be able to mod your switch (this is the same if possibly patched doesn't work). This requires soldering skills so make sure you know what you're doing and follow a different guide. CAN I USE ATMOSPHERE SYSNAND? - Yes but do not install "free" games or unlicensed nsps on your sysnand, as you will be BANNED. Only use your sysnand for custom themes/mods in games. Check to make sure the mods you use in games are online safe. Only use homebrew applications in your emunand. DOES THIS GUIDE STILL WORK? - if the title doesn't say "OUTDATED" then this guide is still working. When this guide does gets outdated, the steps will be the same but you will need to install newer versions of hekate, atmosphere, and sig patches when they come out. This will be outdataed once nintendo releases a new firmware version that breaks this current atmosphere version. Let me know if you have anymore questions and I hope this helps!
Hi, I've read your documentation and regarding the custom ver with hosts already added I don't understand which file is responsible for autorebooting into payload (comparing it to the official release on GitHub). Also does that mean that every time you reboot it does into Hekate or simply into RCM? Cause afaik the first one is possible only with the chip while the second one can simply be enabled through hekate. Edit: does it depend on the config you said to add into hekate_pl.ini? If so what does it do precisely?
Hi I've read your documentation and I don't understand how your custom version has a working autoboot into Hekate after comparing to the official one, which file is responsible for that? Or maybe you mean it just has AutoRCM on?
my switch is modded via chip but am running into some issues loading modded firmware (idk what my brother did) can I follow this guide to reinstall or is it different for those with a chip?
I was legit thinking about making a switch modding tutorial since all of the tutorials on youtube were ancient but this one is already perfect 😭 Nice vid!!
also he blatantly makes mistakes without cutting them out which is usually fine, but with a tutorial like this you need to be very precise as you could cause damage to your system if you screw around (this is why I recommend written guides in combination with a video)
This video gave me the courage to mod my switch! I haven't done it yet, as I have to get an rcm jig and a better micro sd card for my switch. But I'll mod my switch soon!
Aye good luck! When you get everything, check this videos title to see if it still works 😁 (it will say “OUTDATED” if it doesn’t) which means you’ll have to probably follow a text guide
Thanks heaps bro! I was on v11 SXOS for ages but decided to update/upgrade today, and this made it mad easy thanks to you, took me a lunchbreak to do it all. You are legit funny and made me laugh a couple times, lol at the 100% discount! Cheers!
Thank you for the video guide. I found it helpful, though it moves a bit quickly, making it difficult to follow. For the next video, would it be possible to slow the pace down and avoid some of the cuts? A longer, more detailed video would be much easier to follow for most people. Much appreciated!
finally, a better guide than the chatgpt guide, i could actually follow it if my old switch's sd card port actually worked :( (its unpatched too its just the sd card slot that dont work)
Underrated guide. I followed a different guide and lost all my switch data to the formatting fat32 but I'm running disk drill right now to get it back, wish me luck.
THANK YOU! I got it modded! there was an error but I fixed it. Edit: If you get Invalid GPT signature, a possible solution is to go into hekate and pick emuMMC -> migrate emuMMC -> fix RAW.
This literally took me all night to do since I was kinda not doing things right but eventually I got it to work and i installed a cool splatoon custom theme
If I format the card, will I lose all the games I bought? If I back them up on my computer and then transfer all the files to the formatted SD card, will that ruin the JailBreak?
For some reason, going through all these steps actually ends up removing all the files we copied over in the start of the video, step 4ish... So do this: 1. You have to be in the Hekate boot menu. 2. Go into TOOLS -> USB TOOLS -> SD CARD and connect your switch to your PC so you can copy files. 3. Copy over all the folders and files exactly as he shows in step 4 (where to drag the files) 4. Now go into Launch and launch the AtmoEmu. That should do it! :) Hope it helps. If this doesn't work, then try copying the ZIP files directly to your switch SD card and then extract them there.
@@salmanmirza5510 I tried that and this tutorial many times. I repeated this like 4 times and every time I followed the directions to the tea I still end up with the same error. So I tried to mod the switch using IDX3 tutorial on how to mod the switch and it worked with no issues. This tutorial isn't good and copying the zip files straight to the SD card doesn't work either and you still end up with the exact same error code as before. Also I didn't quite catch that but you never once mentioned how after your done creating an SD partition, you go back onto the switch's SD card and re-drag all the downloads that you did including hakate, atmosphere, and etc so that you can actually go into emunand and have no error code. Not to mention this tutorial doesnt mention how once you turn off your switch, you have to go back to Hakate and redo the entire RCM loader thing. To fix it you can enable AutoRCM so you dont have to keep doing that over and over again. Overall im not bashing you on the instructions that you gave and if that worked for you more power to you. However, giving directions that lead back to the exact same issue is literally the blind leading the blind and is a waste of time.
Yes I really do want to jailbreak and mod my Nintendo Switch I haven't never modded any Nintendo consoles, but Nintendo Switch would be my first console what I'll mod so i'd came just to the right place to see the Master of modding the black Yoshi Teedle thank you for these AWESOME modding videos what are truly helpful: Here we GOO WAHOO! 🦖🖤
@@teedleytthanks for being the only creator replying 3:36 I never seen someone do this 4:22 Other videos said not to touch sliders 4:50 Other videos pressed SD File
@@lum1lad775 not sure if I can be the most helpful with this, but from what I understand, we create the partition so we have a back up to revert to, in the event that something happens to the emuMMC. As for where others press SD file, we use partition here to utilise the partition we just created, for the same reason previously stated. I can't say this is 100% factually correct, but what I can say is doing things this way is way more secure than what others advise.
@@StevieJayDee Thanks for reply mate, I achieved it 4days ago and you're right, the SD partition is important to create an emuMMC and other tutorials were teaching how to make sysCFW so that's why it was different, my advice to others is that it doesn't make sense until after you done it.
Hey Teedle, great video, but I need a little help. Got to the part where you launch atmoemu. I am getting an error message " A fatal error occurred when running Fusee. Failed to open sdmc:/atmosphere/package3!" any ideas on how to get passed.
Alright well a quick google search and I figured it out. For some reason, going through all these steps actually ends up removing all the files we copied over in the start of the video, step 4ish... So do this: 1. You have to be in the Hekate boot menu. 2. Go into TOOLS -> USB TOOLS -> SD CARD and connect your switch to your PC so you can copy files. 3. Copy over all the folders and files exactly as he shows in step 4 (where to drag the files) 4. Now go into Launch and launch the AtmoEmu. That should do it! :) Hope it helps. One more thing, if this doesn't work then try copying the ZIP files directly to your switch SD card and then extract them there.
@teedleyt for the sigpatches im confused cause you drag the contents (atmosphere, bootleg, and switch) which are already part of the SD CARD so do you take the contents from the sigpatches folders and put it in the already existing atmosphere bootleg and switch? (ANYONE PLEASE HELP I WANT TO ADD MODS TO TOTK PLSSSSSSSSS)
I have the old model switch but havent updated it in a really really long time & i used to have atmosphere on it, do you recommend me to install latest update then start over?
4:07 why tf would you tell us to do something that is not safe? You even highlighted the text that says it's pointless because your serial number is stored in other places as well... am I missing something? Bro wtf is this guide... you didn't explain anything important. How do we play games online without getting banned? Most people just want mods for Smash Ultimate and want to play them online like all the streamers... 5/10 tutorial, missing extremely important info.
could you link me - in private as well - links that mention how to play online without getting banned and how to install free games? Thank you in advance
I need some help, My switch hekate updated to 6.2.2 and for some reason it shows "A Fatal error occurred when running Fusee. Unable to identify package1!" can you help to resolve this issue?
@vortexmasterx What I did was take out the SD card from my Switch and put it in my computer, deleted everything from the SD card and instead pasted the files from IDX3 Gaming's video "How to Jailbreak Nintendo Switch 19.0.1 // Atmosphere 1.8.0 - Hekate 6.2.2 - Tinfoil 19". After one restart with the same problem, the second restart seemed to work. I'm not sure if doing this will cause any more problems, but at least I can use my Switch again.
i was gon pay someone to mod my switch but i’m too scared so ima js sell my oled for 200 and get the steam deck for 650 😈 i’ll get the switch again when the 2nd one release
@@stevenli1629 it’s a few things wrong with it (curtesy of my siblings) like one of the locks on the joycon strap missing, and the back cover to the dock is missing. BUT it comes a switch carrying case, a red n black protective cover case and pokémon violet
why were you too scared to pay someone to mod your switch? it's not like it's super risky if you're paying someone who's done it a lot and most people won't even make you pay if it doesn't work. you do you but I don't see why it's scary at all
@@darkrrred bc nintendo seeking out and is suing those perform these services and requesting them to release the names and address from those that paid for it. i gave up on modding my switch and is instead selling my oled for 200 to get a ps5 at some point since i haven’t played it in months
It's literally 1000X more complicated. Especially trying to m0dd a V2/OLED. I had to pay someone to do it. Not that i cant, more like i dont wanna deal with it
*Don't watch videos to mod your devices.* Many can use outdated methods, or sometimes (not necessarily accusing this guy of this exactly) may even provide viruses. Please use the reputable guide websites to mod your switch (would say url but yt keeps auto deleting my comment), as those sites will be up to date and provide safe links.
@@oculedo9137 I tried replying with the actual link, but yt removed it so I will just give a hint. Look up switch hex (with an a and a "cks" instead of ex) guide.
The thing is theres a lot of videos modding the switch i dont get how you couldve done it faster even if this video came out sooner, since you couldve followed other videos or checked reddit or even homebrew website
Do you think an rcm jig would still work on a switch that doesn’t read right joycons? I’ve tried cleaning the connectors but it still won’t recognize them
How do you do the hard mod so you don’t have to use the jig every time you reboot the device? Is that done only with the added hardware chip? I modded a gen 1 for my nephews but it’s annoying using the jig.
To save backup nands or whatever you called them here, email the backups to yourself...that way if anything ever happens to the PC/hard drive you have the backups saved to, you can always get them via your email. Question though, and sorry if i missed it...which vision switch and what firmware do you have to be on to do this? I see the video is 2 days old but last i checked everything said you had to now solder some stuff to the switch. Any info will be greatly appreciated, thanks!
Ah I went back and re-watched and saw it needs to be an old switch, which I believe mine is...will check serial number, but what official firmware is this for? Cause I believe my switch is most likely on the newest official firmware.
So i was trying to mod it with 32 gigs and i had some problems so i deleted everything, is 32 gigs not good? i just cant get a bigger one other then 64 i just wanna enjoy a switch and when i get 512 ik how to change sd cards
Quick question that you may or may not know the answer to: My switch is too old and is patched, but I *really* want to mod my games. Is there any way to mod them without a modded switch, or do I just have to buy and mod an un-patched switch
hi hope you can help? when launching to atmosphere, i get a black screen saying " a fatal error occurred when running fusee. failed to open sdmc:/atmosphere/package3!" im not sure if i did something wrong?
@teedleyt dumb question but can you mod games that you have downloaded through this emulator, like a randomizer/custom outfits for pokemon or different armour/models for botw/totk?
hello at 4:33 i have i problem saying its gonna delet everything from the sd, in the video it says your files will be backed up and restored. Any help?
@ i haven’t started just yet. Waiting on some stuff in the mail. But this switch at one point was my main, so its been updated quite a bit. So i was just wondering if any of the updates have to be pulled so its in its base state, or can this be done with any update? Just as long as its the old model?
this is a bit fast even when slowing down video. im gettin confused on where to place files in specific folders. do i use the folder in sig patch or the hekate
I've definitely got no reason to do this until Nintendo Switch R launches (and hopefully is hackable within the first nine days or so!), but this is definitely good to know. Buuut I'm probably going to be reaaaally focused on Nintendo Switch R once it's out if it has any semblance of decent features.
My switch is listed as "Possibly Patched", and upon plugging it into my laptop, TegraRCM does not register the RCM even though my switch is in RCM mode. Is my switch in fact patched, or am I doing something wrong??
If you’ve got an old switch that used to connect online but you’ve separated it from your account and you mod it is there any way they can ban your new switch if they use the same account?
Yo big question if I do jailbreak can I still play games like Fortnite and online games or is it just like the ps4 jailbreak where I can only play offline??
so i checked my switch serial number in that website, and it gives me a prompt saying "possibly patched". does this mean i will have a higher risk breaking my switch or am i even able to mod my switch at all?
Hey I doubt youll see this but when I inject hekate it just says Missing LP0 (sleep) lib Missing Minerva lib Update bootloader I followed your instructions but I obviously messed up somewhere
I dont get this, at 1:45 you drag the hakata.bin into the sd, then we select the hekate.bin on your desktop? Do we copy it to the sd first and have another on the desktop or what am I missing here?
hey. My serial number isnt supported so i have to use a modchip but i cant find it anywhere. Can you tell me where to find it. Also is there any tutorial on how to hardmod?
I have a game installed when im in the stock firmwhere but when i go to the custom firmwhere it says i have to download it but it can't communicate with the server. what should i do?
i have tried to get it to work multiple times but when i try running emunand it tells me that the payload file is missing and that it has something to do with my fusee.bin file but everything seems okay with it and the other folders. please help
My tegraRcm is not responding it won’t boot the Nintendo switch I don’t know what to do please help I pressed inject and it’s just loading do I just wait?(respond NOW!)
I have some questions I have Nintendo switch online will this affect anything in the modding process? And is there any way to save the games and data I already have on my sd card?
Nintendo switch online has no affect and when you format your sd card you have to reinstall all your games but your save data won’t be deleted. To go to your stock firmware tou can either click stock in hekate or restart your switch and it will boot into it 👍
yo, can i have some help? my tegrarcm is not detecting my rcm switch, im running windows10 and the switch is from like march 2017, i checked, its unpatched. Idk what to do, i plug it in with a cable on my pc, put it into rcm, tegra says no rcm device detected, also whenever it goes into rcm i get "The last device you connected to this pc malfunctioned and windows couldnt recognize it."
@@bI00n Then I wonder what the issue may be? Maybe it isn't the transfer speeds, necessarily, but perhaps that it may not be able to handle that kind of data for some reason? I was using a cable that my controller connects to my PC, failing to perform this function. I hope that a solution comes up for you soon!
LATEST SWITCH FIRMWARE IS CURRENTLY NOT SUPPORTED (I'll update the links once support gets added.) Also, please read a written guide if this is your first time modding a switch and not a refresher
PLEASE WATCH THE GUIDE I MADE IN MY DISCORD SERVER INSTEAD IF THIS IS TOO CONFUSING! Nintendo would take down the full video guide I made if I uploaded it to youtube so I put it in my discord server instead. discord.gg/zMzPbaXNWJ It is in the Guides channel.
WILL MY SAVE DATA BE DELETED WHEN FORMATTING?
- No. You will have to reinstall all your games on your stock firmware but your save data will NOT be deleted
HOW DO I GO BACK TO MY NORMAL SWITCH?
- You can either fully turn off your switch/restart it to go back to stock firmware, or inside the hbmenu (album) click "reboot to payload" and inside hekate launch you can choose "stock". When going back to your emunand/sysnand, repeat the steps used in the tegrarcm section of this video.
MY SWITCH SAYS "POSSIBLY PATCHED" ON THE CHECKER WEBSITE. WHAT DO I DO?
- You can still try to mod your switch. If your switch isn't patched, then you will boot into hekate using tegrarcm successfully. If it is patched, tegrarcm will not work. If it doesn't work, you will NOT brick your switch so there's no risk in trying.
MY SWITCH SAYS "PATCHED" WHAT DO I DO?
- You will need to install a modchip to be able to mod your switch (this is the same if possibly patched doesn't work). This requires soldering skills so make sure you know what you're doing and follow a different guide.
CAN I USE ATMOSPHERE SYSNAND?
- Yes but do not install "free" games or unlicensed nsps on your sysnand, as you will be BANNED. Only use your sysnand for custom themes/mods in games. Check to make sure the mods you use in games are online safe. Only use homebrew applications in your emunand.
DOES THIS GUIDE STILL WORK?
- if the title doesn't say "OUTDATED" then this guide is still working. When this guide does gets outdated, the steps will be the same but you will need to install newer versions of hekate, atmosphere, and sig patches when they come out. This will be outdataed once nintendo releases a new firmware version that breaks this current atmosphere version.
Let me know if you have anymore questions and I hope this helps!
garlic bread rice
Hi, I've read your documentation and regarding the custom ver with hosts already added I don't understand which file is responsible for autorebooting into payload (comparing it to the official release on GitHub). Also does that mean that every time you reboot it does into Hekate or simply into RCM? Cause afaik the first one is possible only with the chip while the second one can simply be enabled through hekate.
Edit: does it depend on the config you said to add into hekate_pl.ini? If so what does it do precisely?
Hi I've read your documentation and I don't understand how your custom version has a working autoboot into Hekate after comparing to the official one, which file is responsible for that? Or maybe you mean it just has AutoRCM on?
My Switch says 'WARNING'. Should i try this method?
my switch is modded via chip but am running into some issues loading modded firmware (idk what my brother did)
can I follow this guide to reinstall or is it different for those with a chip?
I was thinkint about modding my switch again, And then this latest guide comes out 3 hours ago, Thank you
No problem!
@@teedleyt does the whole modding process also work on a switch oled
@@Vintal. no sorry only 2016 nintendo swithes
Could you give me a review about how it went and if you did it? Is it worth it or not?
@@KitPlaz 2017**
Sorry I had to 🤣 not tryna be rude just had to be the “um actually” guy for a moment 😂
I was legit thinking about making a switch modding tutorial since all of the tutorials on youtube were ancient but this one is already perfect 😭 Nice vid!!
U should still make it
@@ABIXWEEZY fax
IN CASE ANYONE WAS AS STUPID AS ME
make sure you have the Bootloader folder on the root of your SD card rather than the hekate folder.
Why
@@bayfinest1938 it either wont boot or it'll brick your entire switch. if it doesn't boot, then you got better off
Link?
this tutorial is way to fast and easy to miss stuff bro
Just slow the video down, it seems perfectly paced for me
I had to play at .75 speed. 😅
also he blatantly makes mistakes without cutting them out which is usually fine, but with a tutorial like this you need to be very precise as you could cause damage to your system if you screw around (this is why I recommend written guides in combination with a video)
@@KingSlimeProductionsyes, listen to King. There are way better tutorials out there.
@@KingSlimeProductions what mistakes?
Thanks bro. Really love this tutorial. I had messed up Atmosphere while installing Android and now its back to normal because of you. Thanks a lot.
This video gave me the courage to mod my switch! I haven't done it yet, as I have to get an rcm jig and a better micro sd card for my switch. But I'll mod my switch soon!
Aye good luck! When you get everything, check this videos title to see if it still works 😁 (it will say “OUTDATED” if it doesn’t) which means you’ll have to probably follow a text guide
@@teedleyt Thanks for the advice!
Have you done it yet?
@@Coroski27 I've been busy, but I'm doing it today!
@@papyrusty368The result?
Thanks heaps bro! I was on v11 SXOS for ages but decided to update/upgrade today, and this made it mad easy thanks to you, took me a lunchbreak to do it all. You are legit funny and made me laugh a couple times, lol at the 100% discount! Cheers!
Thank you for the video guide. I found it helpful, though it moves a bit quickly, making it difficult to follow. For the next video, would it be possible to slow the pace down and avoid some of the cuts? A longer, more detailed video would be much easier to follow for most people. Much appreciated!
finally, a better guide than the chatgpt guide, i could actually follow it if my old switch's sd card port actually worked :( (its unpatched too its just the sd card slot that dont work)
Danggg that sucks, it might not cost too much to pay someone to replace it but I’m not sure
you can easily fix it i have an old switch and once it fails i will fix it
Underrated guide. I followed a different guide and lost all my switch data to the formatting fat32 but I'm running disk drill right now to get it back, wish me luck.
didn't know formatting it deleted my files 😭
@@Subraid7272most or basically all programs warn you that reformating will delete everything on the sd card
You shouldn't really be hacking anything if you don't even know that
THANK YOU! I got it modded! there was an error but I fixed it. Edit: If you get Invalid GPT signature, a possible solution is to go into hekate and pick emuMMC -> migrate emuMMC -> fix RAW.
Which error is it? I’m having issues with running AtmoEmu, and it keeps giving me “A fatal error occurred. Invalid GPT Signature”
@@CoolGuy-gb1qe Yea same did you manage to fix it?
@@CoolGuy-gb1qeme too!
how did you fix it
@@worldwide8794 I basically just watched another guys tutorial and it worked totally fine
Wake baby teedle just uploaded
🗣️🗣️🗣️
Only tut that actually works even though he speaks at mock 10 lol
mach*?
"mock" lol
Oh so that’s how it’s pronounced
@@pikacope Nah, it's pronounced mack.
Yeah I had to slow the vid and repeat a few parts but it was still a good guide tbh
This literally took me all night to do since I was kinda not doing things right but eventually I got it to work and i installed a cool splatoon custom theme
Let’s go! Another fire vid from TEEDLE!
Edit: I modded my switch!!
Thank you and thats awesome that you modded it!
If I format the card, will I lose all the games I bought? If I back them up on my computer and then transfer all the files to the formatted SD card, will that ruin the JailBreak?
I no longer want to mod my switch after watching that, thanks!
why?
@@Lama_____ I JUST YESTERDAY WATCHED THE VIDEO AGAIN, HOW DID YOU COMMENT AT SUCH A PERFECT MOMENT
@@WafflesWuzHerebe doing anything but answering the question
@@WafflesWuzHerebros restarted
failed to open sdmc:/atmosphere/package3!
Question
can you show a guide on RCM loader and things it does???
This guy is doing the most, I’ll find a slower video to find out how to do this
I did everything, but right when i click atmoemu shows a message "a fatal error when running fusée" and "failed to open /atmosphere/package3!"
For some reason, going through all these steps actually ends up removing all the files we copied over in the start of the video, step 4ish... So do this:
1. You have to be in the Hekate boot menu.
2. Go into TOOLS -> USB TOOLS -> SD CARD and connect your switch to your PC so you can copy files.
3. Copy over all the folders and files exactly as he shows in step 4 (where to drag the files)
4. Now go into Launch and launch the AtmoEmu.
That should do it! :) Hope it helps.
If this doesn't work, then try copying the ZIP files directly to your switch SD card and then extract them there.
@@salmanmirza5510 I tried that and this tutorial many times. I repeated this like 4 times and every time I followed the directions to the tea I still end up with the same error. So I tried to mod the switch using IDX3 tutorial on how to mod the switch and it worked with no issues. This tutorial isn't good and copying the zip files straight to the SD card doesn't work either and you still end up with the exact same error code as before. Also I didn't quite catch that but you never once mentioned how after your done creating an SD partition, you go back onto the switch's SD card and re-drag all the downloads that you did including hakate, atmosphere, and etc so that you can actually go into emunand and have no error code. Not to mention this tutorial doesnt mention how once you turn off your switch, you have to go back to Hakate and redo the entire RCM loader thing. To fix it you can enable AutoRCM so you dont have to keep doing that over and over again. Overall im not bashing you on the instructions that you gave and if that worked for you more power to you. However, giving directions that lead back to the exact same issue is literally the blind leading the blind and is a waste of time.
@@salmanmirza5510 you are the best tysm
@@salmanmirza5510 yo when trying to boot into EmuNand I get the error: Unable to identify package1
Can you help me ?
What is the difference between this and using the RCM Loader to mod your switch?
Yes I really do want to jailbreak and mod my Nintendo Switch I haven't never modded any Nintendo consoles, but Nintendo Switch would be my first console what I'll mod so i'd came just to the right place to see the Master of modding the black Yoshi Teedle thank you for these AWESOME modding videos what are truly helpful: Here we GOO WAHOO! 🦖🖤
No problem I’m glad to help!! And have fun modding your first console 😁
I would add a mod chip to mine but 1. I never soldered before. 2. I'd probably break my Nintendo switch more than glass against concrete
@@greatlake_editz and also your micro soldering, which is not for beginners at all. almost for pros probably but nah I wouldn't do it
@@joshdoesnotadventure756 I wish there was some guy who'd do it
@@greatlake_editz there is but it will run you bout as much as a v1 switch 😂
keep up the amazing work!
nice tutorial. btw what happens to the save data stored on the switch
your save data wont be deleted when formatting your sd card but you will have to reinstall the games
Little question, do you need to update your switch to the latest firmware or is it also compatible with older firmwares?
No it doesn't work on the latest updates.
No it doesn't work on the latest updates.
@@Tal12075 never mind, RCM exploit works on all firms
Why is every tutorial different, can't tell who's most legit 😭😭
most should all be the same, which steps are different?
@@teedleytthanks for being the only creator replying
3:36 I never seen someone do this
4:22 Other videos said not to touch sliders
4:50 Other videos pressed SD File
@@lum1lad775 not sure if I can be the most helpful with this, but from what I understand, we create the partition so we have a back up to revert to, in the event that something happens to the emuMMC. As for where others press SD file, we use partition here to utilise the partition we just created, for the same reason previously stated. I can't say this is 100% factually correct, but what I can say is doing things this way is way more secure than what others advise.
@@StevieJayDee Thanks for reply mate, I achieved it 4days ago and you're right, the SD partition is important to create an emuMMC and other tutorials were teaching how to make sysCFW so that's why it was different, my advice to others is that it doesn't make sense until after you done it.
Fr 😂
guys mine shows a black screen with this message '' a fatal error occured when running fusée failed to open sdmc :/atmosphere/package3!
lol the ending was pretty funny, like 👍🏽
Hey Teedle, great video, but I need a little help. Got to the part where you launch atmoemu. I am getting an error message " A fatal error occurred when running Fusee. Failed to open sdmc:/atmosphere/package3!" any ideas on how to get passed.
same, I also got this error
you find ?
just tried this tutorial on my switch today, getting same error... any fix yet?
Alright well a quick google search and I figured it out. For some reason, going through all these steps actually ends up removing all the files we copied over in the start of the video, step 4ish... So do this:
1. You have to be in the Hekate boot menu.
2. Go into TOOLS -> USB TOOLS -> SD CARD and connect your switch to your PC so you can copy files.
3. Copy over all the folders and files exactly as he shows in step 4 (where to drag the files)
4. Now go into Launch and launch the AtmoEmu.
That should do it! :) Hope it helps.
One more thing, if this doesn't work then try copying the ZIP files directly to your switch SD card and then extract them there.
@@salmanmirza5510 goat
I have a problem at 5:03 saying it failed to boot. What do I do?
It doesn't work because this is not the real tutorial.
It isn't that esay to mod you switch.
@@Tal12075why u switch?
@@antoniojose1557 what the problem to you switch someone.
@@antoniojose1557 because I didn't watch the full video.
cant wait to try this out! thanks!!!!!!!!!
I think I should get a helicopter at 100k
I just saw a helicopter when I was outside, it flight near of our home like helicopter helicopter! 😮
@@Leopez02omg this inspired me so much, im so glad you said that 😐
@@Niallpro10 I just said it :D
Good luck it’s gonna be rlly hard to win 🙏🙏
No you should
@teedleyt for the sigpatches im confused cause you drag the contents (atmosphere, bootleg, and switch) which are already part of the SD CARD so do you take the contents from the sigpatches folders and put it in the already existing atmosphere bootleg and switch?
(ANYONE PLEASE HELP I WANT TO ADD MODS TO TOTK PLSSSSSSSSS)
Did you manage to mod Totk
Of course this is a guide on what NOT to do, wouldn't want a certain company to get mad
Does anyone know if you can do this on an SD that's already being used in the switch?
DO NOT MAKE YOUR OWN RCM JIG!!!
too bad
@@Ollie.Uchiha123how’d it turn out
I did use a small piece of tinfoil and it doesn't damage anything and works flawlessly 😂
works fine for me
why
I have the old model switch but havent updated it in a really really long time & i used to have atmosphere on it, do you recommend me to install latest update then start over?
4:07 why tf would you tell us to do something that is not safe? You even highlighted the text that says it's pointless because your serial number is stored in other places as well... am I missing something? Bro wtf is this guide... you didn't explain anything important. How do we play games online without getting banned? Most people just want mods for Smash Ultimate and want to play them online like all the streamers... 5/10 tutorial, missing extremely important info.
could you link me - in private as well - links that mention how to play online without getting banned and how to install free games? Thank you in advance
I need some help, My switch hekate updated to 6.2.2 and for some reason it shows "A Fatal error occurred when running Fusee. Unable to identify package1!" can you help to resolve this issue?
did you get this issue resolved
No but I need help on the issue, I tried to do it again and it keeps getting the same error.
@vortexmasterx What I did was take out the SD card from my Switch and put it in my computer, deleted everything from the SD card and instead pasted the files from IDX3 Gaming's video "How to Jailbreak Nintendo Switch 19.0.1 // Atmosphere 1.8.0 - Hekate 6.2.2 - Tinfoil 19". After one restart with the same problem, the second restart seemed to work. I'm not sure if doing this will cause any more problems, but at least I can use my Switch again.
i was gon pay someone to mod my switch but i’m too scared so ima js sell my oled for 200 and get the steam deck for 650 😈 i’ll get the switch again when the 2nd one release
Let me buy it!!
@@stevenli1629 it’s a few things wrong with it (curtesy of my siblings) like one of the locks on the joycon strap missing, and the back cover to the dock is missing. BUT it comes a switch carrying case, a red n black protective cover case and pokémon violet
why were you too scared to pay someone to mod your switch? it's not like it's super risky if you're paying someone who's done it a lot and most people won't even make you pay if it doesn't work. you do you but I don't see why it's scary at all
@@darkrrred bc nintendo seeking out and is suing those perform these services and requesting them to release the names and address from those that paid for it. i gave up on modding my switch and is instead selling my oled for 200 to get a ps5 at some point since i haven’t played it in months
your ability to connect with your viewers is unmatched!
Already this looks even harder than Wii U jailbreaking
It's literally 1000X more complicated. Especially trying to m0dd a V2/OLED. I had to pay someone to do it. Not that i cant, more like i dont wanna deal with it
Wii u hack is really easy
Man chill, this is a guide, not engagement farming for kids
*Don't watch videos to mod your devices.* Many can use outdated methods, or sometimes (not necessarily accusing this guy of this exactly) may even provide viruses. Please use the reputable guide websites to mod your switch (would say url but yt keeps auto deleting my comment), as those sites will be up to date and provide safe links.
can we get a hint of which web site is your recommended
@@oculedo9137 I tried replying with the actual link, but yt removed it so I will just give a hint. Look up switch hex (with an a and a "cks" instead of ex) guide.
@@oculedo9137 swtch=hex=guid (look up w/ space instead of = sign)
@@oculedo9137 swtchQhakQgude search on ggl (Q is spacebar)
@@oculedo9137 switch hak gude
Does this include a procedure you must do all the time after rebooting the switch? (un/tethered)
Bro I just had to mod my switch by my self 2 days before this video , it was instead a 5 hour process instead of a 7 min easy tutorial 🤦♂️
The thing is theres a lot of videos modding the switch i dont get how you couldve done it faster even if this video came out sooner, since you couldve followed other videos or checked reddit or even homebrew website
@@Dan..K..wymI6 bro I did use Reddit
Do you think an rcm jig would still work on a switch that doesn’t read right joycons? I’ve tried cleaning the connectors but it still won’t recognize them
Hey, pls help it says emunand says it is unable to read sd card but it works in stock sysnand. And cfw sysnand leaves me on a black screen. HELP
How do you do the hard mod so you don’t have to use the jig every time you reboot the device? Is that done only with the added hardware chip? I modded a gen 1 for my nephews but it’s annoying using the jig.
To save backup nands or whatever you called them here, email the backups to yourself...that way if anything ever happens to the PC/hard drive you have the backups saved to, you can always get them via your email. Question though, and sorry if i missed it...which vision switch and what firmware do you have to be on to do this? I see the video is 2 days old but last i checked everything said you had to now solder some stuff to the switch. Any info will be greatly appreciated, thanks!
Ah I went back and re-watched and saw it needs to be an old switch, which I believe mine is...will check serial number, but what official firmware is this for? Cause I believe my switch is most likely on the newest official firmware.
So i was trying to mod it with 32 gigs and i had some problems so i deleted everything, is 32 gigs not good? i just cant get a bigger one other then 64 i just wanna enjoy a switch and when i get 512 ik how to change sd cards
Quick question that you may or may not know the answer to:
My switch is too old and is patched, but I *really* want to mod my games. Is there any way to mod them without a modded switch, or do I just have to buy and mod an un-patched switch
Its impossible. Unless you want to play them using an emulator on a different device.
you have to hire someone to install a modchip into your console if you plan to keep your switch
@@ThatYahoo Oh, I guess I will either wait until I can afford an un-patched switch or someone finds a way to mod a patched switch
hi hope you can help? when launching to atmosphere, i get a black screen saying " a fatal error occurred when running fusee. failed to open sdmc:/atmosphere/package3!" im not sure if i did something wrong?
up
@teedleyt dumb question but can you mod games that you have downloaded through this emulator, like a randomizer/custom outfits for pokemon or different armour/models for botw/totk?
Do I need every time to do the RCM thing or not?
can i use my switches sd card that i have on it for this? or should i use a new one? what are the cons of using the card i have for it currently?
When i press Inject Payload the Programm freezes
hello at 4:33 i have i problem saying its gonna delet everything from the sd, in the video it says your files will be backed up and restored. Any help?
Around 2:04 seems to miss a step?
a fatal error when running fusee
failed to open sdmc:atmosphere/package 3!
what do Imdo?
EXACTYL FOR ME - what did you do?
do u have to mod hekate with ur sd card inside the switch or can u take it out because the sd card doesnt show up when i plug the switch in
About to embark on this journey. Do i need to factory reset before this process
no you can create backup, lmk if this worked
@ i haven’t started just yet. Waiting on some stuff in the mail. But this switch at one point was my main, so its been updated quite a bit. So i was just wondering if any of the updates have to be pulled so its in its base state, or can this be done with any update? Just as long as its the old model?
after deleting my games on data management do i just simply re install them? and will i loose all my progress?
this is a bit fast even when slowing down video. im gettin confused on where to place files in specific folders. do i use the folder in sig patch or the hekate
I've definitely got no reason to do this until Nintendo Switch R launches (and hopefully is hackable within the first nine days or so!), but this is definitely good to know. Buuut I'm probably going to be reaaaally focused on Nintendo Switch R once it's out if it has any semblance of decent features.
So Ive tried 3 different videos, I bought the rcm jig but cannot get tregrarcmgui to detect the switch and mine is moddable any tips?
My switch is listed as "Possibly Patched", and upon plugging it into my laptop, TegraRCM does not register the RCM even though my switch is in RCM mode. Is my switch in fact patched, or am I doing something wrong??
I'm getting 'A fatal error occured when running Fusee.
Invalid GPT signature.
Keeps happening after reboot and I'm stuck on that screen. Any advice?
at 5:00 when i go to launch it comes up with an error saying invalid GPT signature do you know how i can fix that
but are you able to update your games after you jailbreak if you dont connect to nintnedo?
When i go to partition my sd card it tells me my files will be wiped and no back up will be made. That I will have to do it manually?
If you’ve got an old switch that used to connect online but you’ve separated it from your account and you mod it is there any way they can ban your new switch if they use the same account?
I updated my switch and now it seems that it’s back to default. It can start up without the injector and only in Stock. The Hekate doesn’t appear
Yo big question if I do jailbreak can I still play games like Fortnite and online games or is it just like the ps4 jailbreak where I can only play offline??
You can play online on your sysnand if you keep it clean (no downloading apps to the home menu)
There arent many folders in my atmosphere folder. There's no config or config_template folder!!
so i checked my switch serial number in that website, and it gives me a prompt saying "possibly patched". does this mean i will have a higher risk breaking my switch or am i even able to mod my switch at all?
so i done "is my switch patched" and i says i could possibly be patched should i still do it?
Hey I doubt youll see this but when I inject hekate it just says
Missing LP0 (sleep) lib
Missing Minerva lib
Update bootloader
I followed your instructions but I obviously messed up somewhere
same thing happened to me. any updates?
I dont get this, at 1:45 you drag the hakata.bin into the sd, then we select the hekate.bin on your desktop? Do we copy it to the sd first and have another on the desktop or what am I missing here?
hey. My serial number isnt supported so i have to use a modchip but i cant find it anywhere. Can you tell me where to find it. Also is there any tutorial on how to hardmod?
I have a game installed when im in the stock firmwhere but when i go to the custom firmwhere it says i have to download it but it can't communicate with the server. what should i do?
I installed everything, but it's not showing up in my album. Only when I hook it up to my laptop. Is there a way around this?
what do you do if you wanna copy large files on to your sd card ? 32fat only allows 4 gb ?
Hi, I followed your steps but when I click on images error code 2144-0001 appears and I can´t get into it to change themes. Thanks
i have tried to get it to work multiple times but when i try running emunand it tells me that the payload file is missing and that it has something to do with my fusee.bin file but everything seems okay with it and the other folders. please help
So i make emmu.mmc 1, still move to root?
I just did it and it works thx
Damn the one time I don’t regret not upgrading my switch
I got a 1tb switch is that enough for partition?
i got problems on switching internet connection with one not saved before the first lunch of emu, some help? do i config something wrong?
Do A Face Reveal, Helicopter And Country Giveways, And A House Reveal!
2:42 mine just has a blank screen and on TegraRcm it said it worked??
Probably a patched switch then, if it stays on a black screen it’s not going through unfortunately.
Any update what happened
@@tilt2triangle412 i gave up on it, i could not care about it anymore, i modded my wii u instead and that's been good enough for me.
Mine Dose this aswell
@@08esco what is ur switch serial number
i might plan on doing this but i have one question
does it work with parental controls?
@kramsdell_lmaaaooo
@@ItsQubi just deactivate parental controls
My tegraRcm is not responding it won’t boot the Nintendo switch I don’t know what to do please help I pressed inject and it’s just loading do I just wait?(respond NOW!)
You absolute beast. 👌✨
I have some questions
I have Nintendo switch online will this affect anything in the modding process?
And is there any way to save the games and data I already have on my sd card?
Nintendo switch online has no affect and when you format your sd card you have to reinstall all your games but your save data won’t be deleted. To go to your stock firmware tou can either click stock in hekate or restart your switch and it will boot into it 👍
6:54 this was the point where i said yes
yo, can i have some help? my tegrarcm is not detecting my rcm switch, im running windows10 and the switch is from like march 2017, i checked, its unpatched. Idk what to do, i plug it in with a cable on my pc, put it into rcm, tegra says no rcm device detected, also whenever it goes into rcm i get "The last device you connected to this pc malfunctioned and windows couldnt recognize it."
Get a better cable that is built for transferring data. I had the same issue.
@@codyhale6368 I use my cable for oculus quest 2 so it isn’t the transfer speeds.
@@bI00n Then I wonder what the issue may be? Maybe it isn't the transfer speeds, necessarily, but perhaps that it may not be able to handle that kind of data for some reason? I was using a cable that my controller connects to my PC, failing to perform this function. I hope that a solution comes up for you soon!
@@codyhale6368 ty