VoiceMeeter is exactly what I've been looking for. The only way it could be better is if I could specify three outputs, but this is still infinitely better than what I have been doing. Thanks, man.
Sorry didnt see before now. Voicemeter banana is an advanced version of voicemeter ( still free) where you can have 3 or more outputs. Many more features in VM banana overall
Thank you! This solved my issue of HDMI and outputting to speakers at the same time. I went with the Voicemeeter solution as the other was causing a terrible echo. I am shocked that this video isn't in the millions of hits range. It was really the ONLY youtube, or forum that had the best solution. I appreciate how the pacing of the video made following along with you very simple. Thanks again! I have liked and subbed.
Dude, you just saved me. This is a cool program. It can even forcibly equalize the delay of the output from different channels, which helped me a lot (there was a need to connect bluetooth headphones with speakers at the same time, there is a delay of about 300 milliseconds). Thanks for the material
Ok, in my case there was some delay between the TV via HDMI cable and the external audio amp via 3.5mm jack output of the PC, In VolumeMeter -> Double click on the big letters A or B on the output, it pops up a screen with more settings ! Under the "Monitoring Synchro Delay" you can adjust the delay times. I had to delay my speakers with 25ms (actually 50ms i think is better) to match the HDMI output signal to the TV.
WOW... After all that searching,..... this finally worked on my MSI WIN-10 Creators Addition Laptop.... I got a Blue-Tiger Truckers head phone and a Bose Over Ear Head Phone to work simultaneously without lag or buffering problems... BRILLIANT!!!! for Bluetooth headphones like the ones I'm using... make sure you choose your head phones under the "MME" setting. THANKS GUYS!
I've been trying to get this shit to work for an hour before I came across this video. I had little hope that a six year old video would still be relevant, but it certainly had the info I needed. Many thanks!
See ju ei tööta!? Tehes kõik protsetuurid läbi, jõudes voicemeetri juurde, pannes A1'le speakerid A2 teleka ja tulemus on sama delay'ga?? Arvuti mängib ennem kui hdmi. Mida te veel teinud olete, et probleem lahendatud sai? või oli teil teine probleem üldse?
This worked for me, thank you so much! was looking for a software like this since few weeks but usually would end up visiting threads that concluded that windows doesn't support multiple device output
I appreciate you because I thought it wasn’t possible after trying a few different thangs for a week. After seeing your video I remembered to do the last step which was change the audio on the pc 🤦🏽♂️
Thank you very much for this video! Very well explained, and it finally put an end on a search for this exact solution that lasted a good few months. All the best.
Thank you for this video. Gonna use this to do a beat saber party so that it's not just the player hearing the song and everyone else watching a spastic vr mime.
I bought an Asus PG42UQ OLED monitor which has pretty decent built in speakers. I could not figure out how to get the sound channel on both the monitor and audio output to my speaker setup. It would be such a shame to let one of the best features of the monitor not even get used because I am outputting to some Klipsch speakers. My speakers are very crisp and clear but are now absolutely benefitting from the extra bass coming from the monitor! They sound way better together. You're a life saver! I couldn't even get the built in windows work around running at all.
I'm going to mess around with everything you just showed. I'm not entirely sure if I'll be able to use your information for my situation, but this is an amazing and very informational video thank you very much! Btw Voicemeeter is freaking awesome, I wish I had known of it's existence before...
Was recommended Voicemeeter Banana by a mate and been using it for ages. Banana is the version to go with; it includes a nice old fashioned tape player audio thing to test that it works, very handy 😎
In my case, my laptop speaker device is called Realtek High Definition Audio and i want to output to my old Technics speakers which are connected to my laptop via 3.5mm audio cable. When it is connected it outputs to the Technics speakers and not to my laptop and it still shows the same output device (Realtek High Definition Audio) so the problem is i can not choose two output devices because two speakers are the sam output device on my computer. Any help ?
Thank you so much - i have been trying to do this for almost a year - i have tried everything because i did not have the realtek audio stereo mix option - the 3rd party software option was perfect
This still works great. The link is broken, but a quick google search later and a few minutes of configuration and my windows 11 machine can output to two audio devices. Thanks.
in my case there was some delay between the tv and the external audio amp, if you double click on the big letters A or B it pops up more settings - > under "Monitoring Synchro Delay" you can adjust the times. I had to delay my speakers with 25ms or 50ms to match the HDMI output signal to the TV. Works like a charm!
Noticing that you were using the VAIO as the default... made me rethink what I was doing and fixed my issue since installing the latest AMD driver for DOOM Eternal!
Thank you so much for posting this! I don't know why, but the analogue audio output on my tv has a delay from the speakers built into the tv. Thanks to Voicemeeter I'm finally able to have my old analogue gear and the speakers in my hdmi tv in perfect sync. I should also add that if I set A1 to analogue out and A2 to hdmi out I had a delay. However, when I set A1 as hdmi and A2 as analogue, there's no delay. There's something else you didn't mention. I needed a way to be able to easily adjust the volume of both outputs at the same time. The volume slider built into windows doesn't adjust the voicemeeter output gain. I had to make macros that let me map keys to the volume slider that controls the gain.
Great tutorial! I'm currently using this so that I don't have to constantly switch between my headphones and the HTC Vive headphones, plus there's no delay. Thank you!
Thanks a ton for this video. I'm using a wireless headset and would like to turn on my speakers w/o the hassle of changing anything in Windows settings. This is great.
@@Deadrax so far nothing.. Someone said something about messing around with the buffering speed in the setting but it didn't do much for me. I just Uninstaller it and cut my losses.
Thanks! I have Realtek interface but I don't connect using the audio jack. (I have 1 HDMI, 1 Display Port, and 1 USB adaptor for HyperX 2.) Voicemeeter solves the problem nicely.
Voicemeeter also has a more feature rich version that they ask for donations to gain access to, Voicemeeter Banana. It has a bit more detail in User Interface and options for adjusting and inputting more audio channels. Great video, thank!
Thanks mate, voice meeter way better than realtek solution. I have two usb headphones that I want to use in same tame when I have a guest. Works perfect.
i use a bluetooth speaker and my normal pc speakers but the bluetooth speaker has a massive delay and sometimes they cant be seen in the voicemeter program also the bluetooth speaker isnt mutable its only mutable if u mute the main output device
there is delay on mine, unless there is some fx present that I need to turn off (voicemeter) actually it's when I select MME and not WDM (wdm for TV hdmi now stops delay)
Don't use MME if you can. It's old and can have significant delay. Besides that just use what works without any problems. You can adjust the delay by lowering the buffer size in Menu -> System Settings/Options -> Buffering . But lowering the buffer size also increases cpu usage.
Thank you so much for this. Although I noticed that wireless devices should be placed in A1 output to eliminate obvious delay and wired ones on A2. Still has a bit of delay for me (since my bluetooth device is not that high quality)
Thnx! But is there any posobility to adjust one of output devices with the equilizer? I want to use external speaker as a subwoofer, need to cut some frequancies.
Awesome, thanks & vielen Dank! Helped me to connect two JBL Charge 5 via Bluetooth in Win11, and use them simultaneously. Unfortunately, I still do not know how to pair them as real stereo speakers, meaning: One speaker only plays left-side audio, one speaker plays only right-side audio. I guess this is somehow possible in Voicemeeter.
Captiv4te Please double check that you have disabled the "listen to" button (as described in option 1) in all of your devices. Also: what operating system are you using? I could only check with Win7x64 and there was only a very very small delay (not comparable to "listen to").
schneemann gaming I am using windows 8.1 Pro 64bit, legit copy with a clean install not a week ago.I will try turning off the "listen to" and see if my results improve.
Even now, 6 years later you're saving people a massive headache. Thanks ever so much :-)
headache still i dont know why even wiith the new banana meter i cant play mi sound on my headset and capture card at the same time,
VoiceMeeter is exactly what I've been looking for. The only way it could be better is if I could specify three outputs, but this is still infinitely better than what I have been doing. Thanks, man.
Voicemeter banana can do this if u still need it. :)
Patrik Christiansen I’m in a similar situation to him, mind elaborating?
Sorry didnt see before now. Voicemeter banana is an advanced version of voicemeter ( still free) where you can have 3 or more outputs. Many more features in VM banana overall
@@fnumbola 👑
@@frankwhite675 potato is even more inputs too if you should ever need more
You r godsend. I have spent over a week trying to hook up my dual PC n had difficulty with the audio. THANK U.
Finally a solution. I logged only to click "like" on this video. I have been searching for hours. The Voice meeter was the solution. Thank you!
Thank you! This solved my issue of HDMI and outputting to speakers at the same time. I went with the Voicemeeter solution as the other was causing a terrible echo.
I am shocked that this video isn't in the millions of hits range. It was really the ONLY youtube, or forum that had the best solution. I appreciate how the pacing of the video made following along with you very simple. Thanks again! I have liked and subbed.
THANK YOU SO MUCH I'VE SPENT ALMOST 2 WEEKS TRYING TO GET DUAL AUDIO!
I LOVE YOU!!! A friend wants to come at my house tonight to play Alien Isolation, so we want both to get full experience through headsets
dude i was working on this for 2 days! Voicemeeter was my solution. this was wicked helpful. I hope you are doing well
Thank you mate! you are a life saver.
@@jo_240B No shit sherlock.
Omg you've been one of us o:
man with funny German accent explains to me what I need to know. This is the perfect tutorial
Dude, you just saved me. This is a cool program. It can even forcibly equalize the delay of the output from different channels, which helped me a lot (there was a need to connect bluetooth headphones with speakers at the same time, there is a delay of about 300 milliseconds). Thanks for the material
Ok, in my case there was some delay between the TV via HDMI cable and the external audio amp via 3.5mm jack output of the PC,
In VolumeMeter -> Double click on the big letters A or B on the output, it pops up a screen with more settings !
Under the "Monitoring Synchro Delay" you can adjust the delay times.
I had to delay my speakers with 25ms (actually 50ms i think is better) to match the HDMI output signal to the TV.
YOU ARE THE REAL HERO!!!!
i do that and nothing happens do u know why?
holy shit 50 ms worked perfectly, thanks
WOW... After all that searching,..... this finally worked on my MSI WIN-10 Creators Addition Laptop....
I got a Blue-Tiger Truckers head phone and a Bose Over Ear Head Phone to work simultaneously without lag or buffering problems... BRILLIANT!!!!
for Bluetooth headphones like the ones I'm using... make sure you choose your head phones under the "MME" setting.
THANKS GUYS!
I've been trying to get this shit to work for an hour before I came across this video. I had little hope that a six year old video would still be relevant, but it certainly had the info I needed. Many thanks!
THIS SAVED ME!!! I was so pissed at windows stereo mix for not working properly that I am just so happy right now! :)
Danke schon!!! :P
You save my job bro. THank You So much.. much love from Sri Lanka.
Selbst nach so langer Zeit hat das Video mir noch geholfen. Ich hatte zwar einen VoiceMeeter Aux Input, aber hat genauso funktioniert.
Thankyou times a thousand! Fixed the delay issue.
Lots of love,
Estonia
See ju ei tööta!? Tehes kõik protsetuurid läbi, jõudes voicemeetri juurde, pannes A1'le speakerid A2 teleka ja tulemus on sama delay'ga??
Arvuti mängib ennem kui hdmi. Mida te veel teinud olete, et probleem lahendatud sai? või oli teil teine probleem üldse?
This worked for me, thank you so much! was looking for a software like this since few weeks but usually would end up visiting threads that concluded that windows doesn't support multiple device output
Ma dude! No one explained it so clear and simple as you!
THANK YOU. Thank you. Searched for hours trying to figure out how to use 2 headphones. THANK YOU.
Thanks a ton man! You saved me from buying an extra sound card.
After watching 1000 videos, this is the one that solved my problem. Thank you for a great and informative video!
Can you help me on this settings
I appreciate you because I thought it wasn’t possible after trying a few different thangs for a week. After seeing your video I remembered to do the last step which was change the audio on the pc 🤦🏽♂️
Thank you very much for this video! Very well explained, and it finally put an end on a search for this exact solution that lasted a good few months. All the best.
Thanks for the great video. VoiceMeeter seems to be the only way to run the speakers of both of my HDMI monitors at the same time.
Works great, Excellent video that got me to where I needed to be. I now output to two devices just like I wanted. Thank you so much!!!
Thank you for this video. Gonna use this to do a beat saber party so that it's not just the player hearing the song and everyone else watching a spastic vr mime.
I bought an Asus PG42UQ OLED monitor which has pretty decent built in speakers. I could not figure out how to get the sound channel on both the monitor and audio output to my speaker setup. It would be such a shame to let one of the best features of the monitor not even get used because I am outputting to some Klipsch speakers. My speakers are very crisp and clear but are now absolutely benefitting from the extra bass coming from the monitor! They sound way better together. You're a life saver! I couldn't even get the built in windows work around running at all.
Thank you very much! I have been looking for a solution to this since the first solution never worked, and the second solution did. Cheer.
Finally! Someone, with a REAL solution! Thanks man!
Very useful, there is no delay between virtual and hardware output when using Voicemeeter, perfect.
Thank You!
Im using voicemeeter now. It seems to work good to output to both my projector and PC
Thank You.
Voice meter worked for me, thanks!. You have a new sub.
finally a working solution for my hdmi and headset. thanks!
I'm going to mess around with everything you just showed. I'm not entirely sure if I'll be able to use your information for my situation, but this is an amazing and very informational video thank you very much!
Btw Voicemeeter is freaking awesome, I wish I had known of it's existence before...
Wow this is awesome, works way better than the standard realtek solution. THANKS HEAPS!!!!!!
Thanks for the tutorial, it was very nice and concise and clear, unlike many that just blanket it, I love the tut, keep up the Guten work JA!!!!
OMG FINALLY.. THANK YOU SO much. After a months of researching finally found a solution for game RAINBOW SIX SIEGE! ! !
Was recommended Voicemeeter Banana by a mate and been using it for ages. Banana is the version to go with; it includes a nice old fashioned tape player audio thing to test that it works, very handy 😎
Thank you for sharing. Helped me out playing two audio with Voicemeeter.
In my case, my laptop speaker device is called Realtek High Definition Audio and i want to output to my old Technics speakers which are connected to my laptop via 3.5mm audio cable. When it is connected it outputs to the Technics speakers and not to my laptop and it still shows the same output device (Realtek High Definition Audio) so the problem is i can not choose two output devices because two speakers are the sam output device on my computer. Any help ?
Vielen Dank, hast mir echt ganz schön weitergeholfen.
THANK YOUUU!
Thank you so much - i have been trying to do this for almost a year - i have tried everything because i did not have the realtek audio stereo mix option - the 3rd party software option was perfect
Thank you! Was pulling my hair out on how to do this, sweet!
Is there a way to connect your PC to a Bluetooth speaker and then to a reagular 3.5 mm Jack speaker?
This still works great. The link is broken, but a quick google search later and a few minutes of configuration and my windows 11 machine can output to two audio devices. Thanks.
didnt mention anything about delay or how to get rid of it.
in my case there was some delay between the tv and the external audio amp, if you double click on the big letters A or B it pops up more settings - > under "Monitoring Synchro Delay" you can adjust the times. I had to delay my speakers with 25ms or 50ms to match the HDMI output signal to the TV. Works like a charm!
thx this was what i was loking for the past days.
Noticing that you were using the VAIO as the default... made me rethink what I was doing and fixed my issue since installing the latest AMD driver for DOOM Eternal!
I get garbled audio issues when I try to run two Bluetooth audio devices...
Thanks! was looking for few days for this solution!
Thank you so much. I don't have a Realtek card so voicemeeter is what I was looking for.
This has really helped me a tonne thank you so much. Now I can merge two systems into one output source.
Du hast mein Leben gerettet! Gruss aus Spanien!
Thank you so much for posting this! I don't know why, but the analogue audio output on my tv has a delay from the speakers built into the tv. Thanks to Voicemeeter I'm finally able to have my old analogue gear and the speakers in my hdmi tv in perfect sync. I should also add that if I set A1 to analogue out and A2 to hdmi out I had a delay. However, when I set A1 as hdmi and A2 as analogue, there's no delay.
There's something else you didn't mention. I needed a way to be able to easily adjust the volume of both outputs at the same time. The volume slider built into windows doesn't adjust the voicemeeter output gain. I had to make macros that let me map keys to the volume slider that controls the gain.
Great tutorial! I'm currently using this so that I don't have to constantly switch between my headphones and the HTC Vive headphones, plus there's no delay. Thank you!
how do i sync it with the other audio output? help pls
Thank you, Holly, I appreciate your constructive feedback!
I updated Windows now my 2nd output option is gone. I un-installed and re-installed Realtek drivers but no luck.
It works perfectly fine, no delay in sound outputs, thanks it works very good 😊😊
Thank you so much brother!! you just helped a church in having better audio =D God bless you!!
Still audio delay with my 2 outputs, doesn't work for me like this. How can I fix this delay thing???
Thanks a ton for this video. I'm using a wireless headset and would like to turn on my speakers w/o the hassle of changing anything in Windows settings. This is great.
And a massive thumbs up in your general direction sir.
THANK YOU SO MUCH, the first method worked wonderfully for me.
theres still a delay for me...what do i do?
Tell me if you find a solution
@@Deadrax so far nothing.. Someone said something about messing around with the buffering speed in the setting but it didn't do much for me. I just Uninstaller it and cut my losses.
Been almost a year since I used voicemeter and completely forgot how it works. Thanks.
Thanks! I have Realtek interface but I don't connect using the audio jack. (I have 1 HDMI, 1 Display Port, and 1 USB adaptor for HyperX 2.) Voicemeeter solves the problem nicely.
Fuckin' A!!
Danke für die Workaround! War kurz davor meine Headsets aus'm Fenster zu schleudern.
Thank You very much man :) You have helped us start our own channel with this :) Thanks again
Voicemeeter also has a more feature rich version that they ask for donations to gain access to, Voicemeeter Banana. It has a bit more detail in User Interface and options for adjusting and inputting more audio channels. Great video, thank!
Thanks mate, voice meeter way better than realtek solution. I have two usb headphones that I want to use in same tame when I have a guest. Works perfect.
VoiceMeter worked perfect..Bundle of thanks
Voicemeter doesn't show my dac/amp in Hardware input?
Just what I needed, thank you SO much!
How to have two volume sliders of the two outputs?
I'm so glad I did this in a VM because all of the sound that came out of the software was popping and cracking
i use a bluetooth speaker and my normal pc speakers but the bluetooth speaker has a massive delay and sometimes they cant be seen in the voicemeter program also the bluetooth speaker isnt mutable its only mutable if u mute the main output device
You can also set it up to boot up when you turn your computer on. Got to menu and select "System tray (Run at startup)"
What should I do exactly if I have two headsets and want the sound from the capture card in both headsets???
What about using 4 Microphones? and having them hear eachother? Im struggling with this.
Every time this setting get loss when after restarting the pc
you have to start the application again, or set it in windows settings
there is delay on mine, unless there is some fx present that I need to turn off (voicemeter)
actually it's when I select MME and not WDM (wdm for TV hdmi now stops delay)
+Mr na
You can also set the delay for each output manually in the settings (to sync the output).
how?
Don't use MME if you can. It's old and can have significant delay. Besides that just use what works without any problems. You can adjust the delay by lowering the buffer size in Menu -> System Settings/Options -> Buffering . But lowering the buffer size also increases cpu usage.
Thank you so much for this. Although I noticed that wireless devices should be placed in A1 output to eliminate obvious delay and wired ones on A2. Still has a bit of delay for me (since my bluetooth device is not that high quality)
Did exactly what I wanted, thanks!
thank you, I needed this, you got a new follower
This video is great. The Voicemeeter website, does not do a very good job of explanation on how how the audio routing works. Thank you very much
Thnx! But is there any posobility to adjust one of output devices with the equilizer? I want to use external speaker as a subwoofer, need to cut some frequancies.
Hi do you have the same solution for mobile phone or ios?
hey i want to have 2 inputs and 1 output. 1USB mic and 1 3,5mm Klinken Kabel. How do i combine them ?
how can you fix the delay tho? using two different outputs for sound..
Nice and clear instructions, thanks for the video.
what if I want A1 and A2 to be the same speaker, I cant figure out how to do it
Awesome, thanks & vielen Dank! Helped me to connect two JBL Charge 5 via Bluetooth in Win11, and use them simultaneously. Unfortunately, I still do not know how to pair them as real stereo speakers, meaning: One speaker only plays left-side audio, one speaker plays only right-side audio. I guess this is somehow possible in Voicemeeter.
Thanks for the video man, works amazing!
I downloaded this, and configured everything as you instructed. There is still an audible delay between devices.
Captiv4te Please double check that you have disabled the "listen to" button (as described in option 1) in all of your devices.
Also: what operating system are you using? I could only check with Win7x64 and there was only a very very small delay (not comparable to "listen to").
schneemann gaming I am using windows 8.1 Pro 64bit, legit copy with a clean install not a week ago.I will try turning off the "listen to" and see if my results improve.
danke bro echt geil mit dem voice meet
after making voice meter default how can i use the key board mute and volume to function ?