At 3:17 "make sure the aircraft has been turned off"? I noticed that yours is running? Or does turned OFF reference propellers turning? you'll have to excuse the quesiton.. I'm new to all of this.. thanks!
+Frederick Dunn It's making sure aircraft has been turned off for at least five minutes prior to calibrating. That's due to the thermals of the Phantom 3. It want it to be cool, prior to calibration. Make sense? =)
Yep couldn't get my new P3 to work at all - just kept buzzing at me - until I saw this video, calibrated both the IMU and Gimbal and hey presto! she's a goer. My angry demenour vanished as soon as I got her in the air and realised just how well controlled and easy to fly it really is - many thanks for the vid. : )
+jason hall Thanks for the kind feedback and happy that I was able to help! Please check out my 400orBelow website too if you have not done so already. I have an abundance of DJI Phantom tutorial content there too!
I did this same thing but I did it when the Phantom was cool. I set it out in my breezeway overnight so it would get cool. I did the IMU calibration as soon as I got up in the morning. I've read that you can also cool it down in your car with the A/C blowing on it. This way it is suppose to reduce the Phantom warm up time as well as calibrate the IMU.
Just came over from the 700 size electric and nitro helicopters. I needed a change. I just bought a used phantom 3 last night and this video really helps me fix a imu error. Thanks and I subscribed
+Thompson Smith My pleasure and please feel free to check out my 400orBelow website too. I have TONS of drone tutorial content there now and lots more coming soon.
Perfect video. Thanks. You mentioned your quad didn't function so good after a particular firmware update. Is it necessary to update at all ? I haven't got my phantom. I only ordered it yesterday but I like to have some kind of a handle on things before it gets here
+Bill Collie Some firmware updates are better than others. Most make things better but there have been exceptions in the past. Check out my 400orBelow website if you haven't. I have a lot of DJI Phantom blog posts there! #DJIPhantom
I've watched many of your videos and found them very informative. I have a P3 Standard and just got the Pro this week. On my Pro's status screen, the indicator for "radio quality" keeps changing from good to poor constantly, however, overall status is "safe to fly GPS!" Is this something I should be concerned about or is this typical of transmission signal kicking in & out? BTW, I love your channel and all of your toys! Great job bro. DJ SOUL FORCE
+DJ SOUL FORCE Also, I might add, I'm getting this warning while being right next to the quad! Thanks for your help. Good luck with the P4 and that Karma!!! (can't wait to see the Karma - but on the other hand, I don't think it will be that big of a success. Phantoms rock!!!)
Yes sir, you do have an abundance of information on your website, but I couldn't find the answer to my question. Could you kindly give the me the short "yes or no" is this typical behavior to have signal quality alert to keep changing from "good" to "poor?" Love the website, it's like a DJI library!!! Lol Thanks
Thank you, you saved me tons of time...i bought a new P3 and did the firmware update. Afterwards all the calibration was screwed up, thanks to your video i was able to get it working and did my first flight in the dark lol
Thanks you, this is a great video , this video helped me a lot and resolve a mystery . I have my drone 3 Standard for a week already and every time I am going to use it this IMU calibration error shows up . Thanks for this video
Unik Perspective Thank you very much and stay tuned for more videos soon =)
7 ปีที่แล้ว +1
You can always tell some is not an RC guy when the turn on the device first. I'm into RC since fm days, you had to turn the transmitter in first. Golden rule.
hi very helpful video, have just one question. is it possible a bad imu calibration compromise gimbal stabilization, making in this way shootings unusable ? i'm talking about the shaki problem of the gimbal during flight
Great Videos! i have a quick question. my phantom 3 pro will not fly straight. Every time i try to fly it in a straight line it drifts to the right. i have not crashed it or anything. I was wondering if the IMU calibration would fix this problem or if you know of anything that could. Thanks!
Thank you for the kind feedback. Check out my 400orBelow website blog and check out the IMU calibration and compass calibration videos. best of luck! #DJIPhantom
Looks like they moved the "SENSORS" menu item to be under the "ADVANCED" menu item on that screen (advanced is now the last menu item on that screen). So now you click Advanced, then Sensors. There's also no text to tell you it is done now.. just shows "10%" on the progress bar.
Nice video! I'm thinking Of getting the professional version, but its a bit on the pricey side for me. I live in europe, and here we have the so called CE mode. Do you know anything about this? I'm wondering if it's worth it, because apparently it limits the range to about 1km? What are your thoughts on this?
Yep..just followed this for my first IMU calibration. Just updated firmware and did IMU and gimbal. Will head out shortly for a test flight. Thumbs up. PS. Love you channel
I've calibrated with stock filter, ND filter, CPL filter, etc. Usually when I change filters I perform a calibration in case that they may be weighted slightly differently.
so i crashed only thing that broke was the props and ive calibrated like 3xs now amd still says "compass error" and then flashes "safe to fly non gps" in tan any ideas whats wrong or im doing wrong? or any suggestions? just subbed thanks for aharing this
Aussie Bloke yes like 5 xs since then I have crashed it because it said gimbal motor overload if you go on my TH-cam channel- "Joe basement woodworking" there's a video called Phantom Menace that i did for "may the 4th be with you"day and it shows my drone crashing from 170 feet altitude it's a gimbal motor overload you can see the propellers in the video just stopped spinning and it just crashes now it's being sent back to DJI hopefully to be fixed or replaced but thanks for the suggestion
hi there can you tell me what i need to calibrate ie what is essential to calibrate before my first flight. do i need to calibrate imu gimbal and drone. ps i have latest firmware just havent flown yet because weather has been crap here. thanks.
whats is is this update for cuz my phantom standard have rc signal weak every time i fly can't go more than 300 or 400 fee distance i called dii and they told me to do this imu calibration but i don't get the message for imu calibration any suggestion what the problem can be
+Carlos Sosa HMmmh....you can check out my FPV troubleshooting tutorial on my 400orBelow website blog. That pertains to the Phantom 3 Pro which uses Lightbridge instead of WiFi but it might contain some useful troubleshooting information for you. Best of luck!
+Frank Verde My pleasure! Please feel free to subscribe and check out my other DJI Phantom tutorial videos too! Also, I have a lot of goodness on my 400orBelow website!
thank you, you just saved me. Your videos are in great detail and show what you need to know to be successful with this drone. Thank you for the help it means a lot: )
Hi there IrixGuy. Got some problems with my p3 4k. I'm unable to do any IMU calibration and IMU value fields are all blank. Also on a camera I can not use down / forward function with the left dial control. Tried lots of things, none worked. Any idea? Thanks!
Fortunately I did not crash it! Today firmware update was available, did it and worked like a charm. With the dial control I did RC calibration (right way) and it worked also! So I'm a happy camper!
big hi from dubai man do you face any issues when you install your props guard clips. as when i install mine i felt like its not 100% stable like before..???? little bit of shaking ..\???
+John Keller Strange. I've never encountered that one. Did you try a compass calibration too? Check out my 400orBelow website blog if you haven't. I have a lot of #DJIPhantom troubleshooting content there.
I installed quick-dsiconnect prop guards on my Phantom 3 Pro prior to the maiden flight and never encountered that issue. Check my 400orBelow website to find the quick-dsiconnect prop guards like I use! #400orBelow
I was following the steps that were given, and when I clicked sensors, the next screen came on but the "IMU Calibration button was not light up to where I could click it. Any help?
Feel free to check out my DJI Phantom 3 troubleshooting blog post on the 400orBelow website. It may contain some useful clues. Best of luck and happy holidays!
+Dilandau88 Thanks for heads up and I just checked and don't see anything missing. At which time segment within this video does it appear to be missing? Thanks!
+IrixGuy's Adventure Channel He's taking about the clear damper pin in the front. The front left and rear right no not in on your video. DJI only ships them with 2 pins actually installed. There are others that came in a little plastic bag.
IrixGuy's Adventure Channel thanks I appreciate it, I just flew my phantom 3 for the first time today and I used your video to finally be able to fly it! I absolutely loved it!!
+Alberto Lau I appreciate the kind feedback and SUBBED your channel bud. Are there any additional Phantom 3 topics that you'd like to see my try to address within upcoming videos?
HI - My 3pro has gone well for a year or so, no crashes etc or even hard landings but very recently the video link started out dropping & now it barely goes at all - anyone else have this problem>
+ShoopkoTube My pleasure! Please feel free to check out my 400orBelow website too if you haven't. I have TONS MORE drone tutorials in the blog section there.
My two motors run faster that two others which make drone flip on one side. Not always but its happening when its on the ground like yesterday. I land and leave motors run at low speed.
+Jake Hanna Thanks! Please feel free to subscribe to my channel and check out my other Phantom 3 videos too! I also have a lot of information on my 400orBelow website.
+Jake Hanna Did you push the charging cable all of the way in? I made the mistake not doing so the first time. It's not an audible click but it's easy to push it in not far enough.
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
A nice short but detailed video. Small bites of info are always better than large gulps.
As alway, great work IrixGuy.
Bob Publicover Thank you!
Great job on all the videos. I have watched several of them. They have made my life as a beginner much, much, much easier and less frustrating!
Thank you and please share my 400orBelow website with others too :)
Thanks helped me a lot IrixGuy's Adventure Channel
CRIS SHOW Thanks for the kind feedback and SUB added for your channel bud =)
ok thanks
The video was very helpful because i was having some IMU issues this morning and i couldn't figure out why it wasn't calibrating.Thanks
+Rob V Happy to help! Feel free to subscribe and check out my other videos too....also the tutorial section on my 400orBelow website =)
Thanks will do
At 3:17 "make sure the aircraft has been turned off"? I noticed that yours is running? Or does turned OFF reference propellers turning? you'll have to excuse the quesiton.. I'm new to all of this.. thanks!
+Frederick Dunn It's making sure aircraft has been turned off for at least five minutes prior to calibrating. That's due to the thermals of the Phantom 3. It want it to be cool, prior to calibration. Make sense? =)
yep... thanks!
Great Video IrixGuy!
Glad ya liked it :)
Yep couldn't get my new P3 to work at all - just kept buzzing at me - until I saw this video, calibrated both the IMU and Gimbal and hey presto! she's a goer.
My angry demenour vanished as soon as I got her in the air and realised just how well controlled and easy to fly it really is - many thanks for the vid. : )
+jason hall Thanks for the kind feedback and happy that I was able to help! Please check out my 400orBelow website too if you have not done so already. I have an abundance of DJI Phantom tutorial content there too!
I did this same thing but I did it when the Phantom was cool. I set it out in my breezeway overnight so it would get cool. I did the IMU calibration as soon as I got up in the morning. I've read that you can also cool it down in your car with the A/C blowing on it. This way it is suppose to reduce the Phantom warm up time as well as calibrate the IMU.
NH Birddog Cool tip!
Just came over from the 700 size electric and nitro helicopters. I needed a change. I just bought a used phantom 3 last night and this video really helps me fix a imu error. Thanks and I subscribed
+S1KRR Thank you for the sub bud!
Great video, thanks! What are those black and red things below motors?
+Sebastian Anderson Quick disconnect prop guard mounts. Check the link within this video's description and you can find them there.
+IrixGuy's Adventure Channel Thanks!
Sebastian Anderson My pleasure!
Wow had so much fun doing this! Great!
Please subscribe and check out all of my other drone videos too! There are a lot more fun things to do with drones!
brilliant tutorial thanks
+hadzrayarchitecture Thanks! Feel free to check out my other drone tutorials too and subscribe to my channel!
Hi there IrixGuy, thank you for the great videos about the Phantom 3. Saved my life a few times.
Glad that you like them and I have a lot more Phantom 3 videos coming soon. I hope to have Phantom 4 and GoPro Karma videos very soon as well!
That was so easy. Great lesson,
+Paul Whitley Thanks!
Thank you for this clear explanation to calibrate IMU. I am follow you!
Thank you for subscribing and be sure to check out my website for all of your drone and drone accessory needs! Cheers!
This was so helpful. Thank you for taking the time to put up these tutorials.
+Thompson Smith My pleasure and please feel free to check out my 400orBelow website too. I have TONS of drone tutorial content there now and lots more coming soon.
Thanks Irix! Very straightforward and helpful.
+MrNbarton Happy to help! Please feel free to subscribe to my channel and check out my 400orBelow website too!
Very helpful. Thanks!
Perfect video. Thanks.
You mentioned your quad didn't function so good after a particular firmware update. Is it necessary to update at all ?
I haven't got my phantom. I only ordered it yesterday but I like to have some kind of a handle on things before it gets here
+Bill Collie Some firmware updates are better than others. Most make things better but there have been exceptions in the past. Check out my 400orBelow website if you haven't. I have a lot of DJI Phantom blog posts there! #DJIPhantom
I've watched many of your videos and found them very informative. I have a P3 Standard and just got the Pro this week. On my Pro's status screen, the indicator for "radio quality" keeps changing from good to poor constantly, however, overall status is "safe to fly GPS!" Is this something I should be concerned about or is this typical of transmission signal kicking in & out? BTW, I love your channel and all of your toys! Great job bro. DJ SOUL FORCE
+DJ SOUL FORCE Also, I might add, I'm getting this warning while being right next to the quad! Thanks for your help. Good luck with the P4 and that Karma!!! (can't wait to see the Karma - but on the other hand, I don't think it will be that big of a success. Phantoms rock!!!)
Thank you and feel free to check out my 400orBelow website blog. I have an abundance of DJI Phantom troubleshooting information there.
Yes sir, you do have an abundance of information on your website, but I couldn't find the answer to my question. Could you kindly give the me the short "yes or no" is this typical behavior to have signal quality alert to keep changing from "good" to "poor?" Love the website, it's like a DJI library!!! Lol Thanks
Thanks very much
You’re welcome!
Nice video help me a lot. Thanks
+Luis Rojas My pleasure! Please feel free to check out my 400orBelow website too. I have a lot of DJI Phantom tutorials there too!
Thank you, you saved me tons of time...i bought a new P3 and did the firmware update. Afterwards all the calibration was screwed up, thanks to your video i was able to get it working and did my first flight in the dark lol
Happy to help! Please feel free to check out my 400orBelow website too!
You can adjust the level of the camera while in flight if it is not level.
Perfect instruction on the IMU calibration!
Thanks you, this is a great video , this video helped me a lot and resolve a mystery . I have my drone 3 Standard for a week already and every time I am going to use it this IMU calibration error shows up . Thanks for this video
My pleasure! Please be sure to check out my 400orBelow website too if you haven't already. I have a plethora of drone tutorials there!
Good job. Keep with your videos.
Unik Perspective Thank you very much and stay tuned for more videos soon =)
You can always tell some is not an RC guy when the turn on the device first. I'm into RC since fm days, you had to turn the transmitter in first. Golden rule.
+Arturo CV Great point!
IrixGuy's Adventure Channel great videos though. I'm sick sorry about the post.
just linked it. always good info@ thx IrixGuy!!
+maarten blokdijk TYVM
thanks dude. was very helpful to me
My pleasure! I welcome you to subscribe to my channel and check out all of my other drone videos too!
hi very helpful video, have just one question.
is it possible a bad imu calibration compromise gimbal stabilization, making in this way shootings unusable ? i'm talking about the shaki problem of the gimbal during flight
Tanks dude, I was stuck on this for over an hour
+Daniel Sawyers NP please feel free to subscribe to my channel and checkout my 400orBelow website for more drone tutorials too!
Great Videos! i have a quick question. my phantom 3 pro will not fly straight. Every time i try to fly it in a straight line it drifts to the right. i have not crashed it or anything. I was wondering if the IMU calibration would fix this problem or if you know of anything that could. Thanks!
Thank you for the kind feedback. Check out my 400orBelow website blog and check out the IMU calibration and compass calibration videos. best of luck! #DJIPhantom
Thanks this video was very helpful !!!!!
TYVM for watching and sharing the kind feedback.
Looks like they moved the "SENSORS" menu item to be under the "ADVANCED" menu item on that screen (advanced is now the last menu item on that screen). So now you click Advanced, then Sensors. There's also no text to tell you it is done now.. just shows "10%" on the progress bar.
I think its because he has a Pro and we are using standard.
Nice video! I'm thinking Of getting the professional version, but its a bit on the pricey side for me. I live in europe, and here we have the so called CE mode.
Do you know anything about this? I'm wondering if it's worth it, because apparently it limits the range to about 1km? What are your thoughts on this?
EagleHD Thanks! Not sure about Europe but I always fly visually. With that said, I know that the range of the Phantom 3 is potentially insane.
IrixGuy's Adventure Channel
Great video! Thumbs up!!
Subcribed. Thanks for sharing.
Thank you very much!
Yep..just followed this for my first IMU calibration. Just updated firmware and did IMU and gimbal. Will head out shortly for a test flight. Thumbs up.
PS. Love you channel
470Matty Thank you very much and be sure to check out 400orBelow website too! I have tons of useful drone stuff there as well.
Awesome video man, thanks. Do you recommend doing the calibration with the ND FILTER on?
I've calibrated with stock filter, ND filter, CPL filter, etc. Usually when I change filters I perform a calibration in case that they may be weighted slightly differently.
so i crashed only thing that broke was the props and ive calibrated like 3xs now amd still says "compass error" and then flashes "safe to fly non gps" in tan any ideas whats wrong or im doing wrong? or any suggestions? just subbed thanks for aharing this
Hard to say since it crashed but check out my IMU calibration tutorial on my 400orBelow website. Best of luck!
did you calibrate your compass?
Aussie Bloke yes like 5 xs since then I have crashed it because it said gimbal motor overload if you go on my TH-cam channel-
"Joe basement woodworking" there's a video called Phantom Menace that i did for "may the 4th be with you"day and it shows my drone crashing from 170 feet altitude it's a gimbal motor overload you can see the propellers in the video just stopped spinning and it just crashes now it's being sent back to DJI hopefully to be fixed or replaced but thanks for the suggestion
Thank you so much for the instruction!
+Jack Chow Happy to help! Check out my 400orBelow website too if you haven't already. I have tons of drone tutorials there.
Thanks for sharing!
+Snoozing Lion My pleasure! Please feel free to subscribe to my TH-cam channel and watch my other drone videos too! #DJIPhantom
Hello where found your protection black and rend . Thanks excuse me for m'y english
Thanks for the help merci.
hi there can you tell me what i need to calibrate ie what is essential to calibrate before my first flight. do i need to calibrate imu gimbal and drone. ps i have latest firmware just havent flown yet because weather has been crap here. thanks.
Does anyone know where the IMU calibration option went in the latest firmware? There's no 'MC Settings' section anymore
Do i need to do an IMU Calibration for each of the batteries i have?
I did
Thank you !😀
You’re most welcome!
I need help doing this
Thanks, worked like a champ!
Johnny Jennings My pleasure! Thank you for taking the time to leave kind feedback =)
Great info. Thank you
Thank you!
whats is is this update for cuz my phantom standard have rc signal weak every time i fly can't go more than 300 or 400 fee distance i called dii and they told me to do this imu calibration but i don't get the message for imu calibration any suggestion what the problem can be
+Carlos Sosa HMmmh....you can check out my FPV troubleshooting tutorial on my 400orBelow website blog. That pertains to the Phantom 3 Pro which uses Lightbridge instead of WiFi but it might contain some useful troubleshooting information for you. Best of luck!
Thank you so much!!! I was going crazy!!!
+Frank Verde My pleasure! Please feel free to subscribe and check out my other DJI Phantom tutorial videos too! Also, I have a lot of goodness on my 400orBelow website!
I'm about to get the phantom 4 (tomorrow) and I'm checking all your videos about it thank you for sharing your time!
Frank Verde When you do, please check out my 400orBelow website. You can find the Phantom 4 and case there! Thanks!
Irix, what are those red and black rubber on the motor?
+KennyLee NYC Check the link within this video's description. They're the 6th item listed =)
thank you, you just saved me. Your videos are in great detail and show what you need to know to be successful with this drone. Thank you for the help it means a lot: )
+Tucker Allen TYVM
Hi there IrixGuy. Got some problems with my p3 4k. I'm unable to do any IMU calibration and IMU value fields are all blank. Also on a camera I can not use down / forward function with the left dial control. Tried lots of things, none worked. Any idea? Thanks!
+Georgian Borat Did you crash it? If not check out my Phantom 3 troubleshooting blog post on my 400orBelow website blog. Best of luck!
Fortunately I did not crash it! Today firmware update was available, did it and worked like a charm. With the dial control I did RC calibration (right way) and it worked also! So I'm a happy camper!
Great video! You saved me a lot of misery with my drone! Thanks a bunch!
+Julio Guerrero Happy to help! Be sure to check out my 400orBelow website too if you haven't already.
Mine says i dont have to calibrate the imu whenever i click on the check imu? Do i still have to calibrate it?
I always calibrate when I move geographical flying locations out of best practice.
Will it fix the driting problem of my drone? Because it always drift backward with the gps of 14 sat
Possibly. Check out my website because I have several videos that may contain useful troubleshooting clues.
i tried the remote calibration and the drift is gone
Sorry, my English is very bad, but i enjoyed your tutorial. I am brazilian and i did not find any video about this in portuguese. Thank you
big hi from dubai
man do you face any issues when you install your props guard clips.
as when i install mine i felt like its not 100% stable like before..???? little bit of shaking ..\???
Omar Atwe I've encountered no issues with the ones that I use It does reduce battery life slightly though due to a slight increase in weight and drag.
Omar Atwe Have you performed the Phantom 3 IMU calibration yet? If not, please feel free to check out my video.
+Omar take Take them off. i hated mine.
Will calibrating the IMU fix my altitude readings. Mine are way off.
+John Keller IMU can fix a lot. For me it has always been the fix for the tilted horizon issue.
dont have a tilted horizon but took a photo and it says I was at 162 meters when I was about 20 meters at best..any ideas?
+John Keller Strange. I've never encountered that one. Did you try a compass calibration too? Check out my 400orBelow website blog if you haven't. I have a lot of #DJIPhantom troubleshooting content there.
I am having this problem but mine doesn't show up sensors in the list to pick
jack humble Latest firmware and latest app version?
Doesn't work for me, when I click calibrate, the 0-100% bar stays at 0% the entire find. I put it on level ground, idk what to do!
Strange. Is there interference in the place where you are trying to calibrate possibly?
What's the best thing to use on the Phantom 3 standard to help prevent the cracking around the motors?
Thanks
I installed quick-dsiconnect prop guards on my Phantom 3 Pro prior to the maiden flight and never encountered that issue. Check my 400orBelow website to find the quick-dsiconnect prop guards like I use! #400orBelow
I was following the steps that were given, and when I clicked sensors, the next screen came on but the "IMU Calibration button was not light up to where I could click it. Any help?
Feel free to check out my DJI Phantom 3 troubleshooting blog post on the 400orBelow website. It may contain some useful clues. Best of luck and happy holidays!
thx this video is op I subscribed your EPIC
Thanks so much! Please feel free to check out my 400orBelow website too!
FYI you're missing a dampener screw on your Phantom. Great tutorial.
+Dilandau88 Thanks for heads up and I just checked and don't see anything missing. At which time segment within this video does it appear to be missing? Thanks!
+IrixGuy's Adventure Channel He's taking about the clear damper pin in the front. The front left and rear right no not in on your video. DJI only ships them with 2 pins actually installed. There are others that came in a little plastic bag.
just subbed thanks for the info!
Thanks for the sub man! I’ll sub back when I’m not on mobile. For some reason TH-cam Studio App doesn’t let me click to subscribe.
IrixGuy's Adventure Channel thanks I appreciate it, I just flew my phantom 3 for the first time today and I used your video to finally be able to fly it! I absolutely loved it!!
Man you are the best.. Thank you
+Alberto Lau I appreciate the kind feedback and SUBBED your channel bud. Are there any additional Phantom 3 topics that you'd like to see my try to address within upcoming videos?
Thanks. Like your to the point video.
+Travel & Masti A Thanks so much!
My gimbal motors overloaded how do I fix that
Ultamite 1423 Have you run the IMU calibration? Check my tutorial video on 400orBelow website.
Ok
could this be why I lose signal when it's 1,000 ft away?
+kenny gaddy I always fly line-of-sight to be safe.
I do as well but when I have a spotter and try to go further my screen says signal lost and it returns home.
This is helpful!
PyroDrone Thanks!
HI - My 3pro has gone well for a year or so, no crashes etc or even hard landings but very recently the video link started out dropping & now it barely goes at all - anyone else have this problem>
Check out my FPV troubleshooting post on my 400orBelow website blog. It may provide useful clues. Best of luck!
hey thanks for your quick response much appreciated
Coromandel Real Estate Photographers My pleasure. Thank you for your viewership!
Subbed
TYVM for subscribing! Please feel free to check out my website too if you haven’t already! I have tons of drone stuff there too! #drone
I have that exact error message
I got poor rc signal after did the IMU calebreation !!!!!
Sometimes I’ve had to calibrate multiple times. Be aware of metallic objects, rocks, electronics, etc. that are in the area while calibrating.
aha so I know now ! I will try a gain in an open area >> thanks
thank you for the tutorial! ;)
+ShoopkoTube My pleasure! Please feel free to check out my 400orBelow website too if you haven't. I have TONS MORE drone tutorials in the blog section there.
Edit. Love YOUR channel....lol
470Matty Thank you very much! I SUBBED back!
thumbs up mate
+Paul Golden Thank you!
I'm trying to do this , but it's stuck at 2% for the last hour ......
I haven't encountered that before.
@@IrixGuy 2% error here :(
My two motors run faster that two others which make drone flip on one side. Not always but its happening when its on the ground like yesterday. I land and leave motors run at low speed.
Yama Hu b
This video is a bit obsolete. they've changed the app so now you have to go into advanced settings
Lens covers mess with Gimbal Calibration.
+Brian Kushner Strange.
Didn't do this and I was flying with 9 satellites after I did this 14 satellites Hell yeah
Black and red'
Thank you from a complete rookie
Thank you!
Jeeze You really love the sound of your voice. Get to the point please.
+Terryb31 LOL
Very frustrated until I found this video
+Jake Hanna Thanks! Please feel free to subscribe to my channel and check out my other Phantom 3 videos too! I also have a lot of information on my 400orBelow website.
I have the new remote and it is not charging! I need help!
+Jake Hanna Did you push the charging cable all of the way in? I made the mistake not doing so the first time. It's not an audible click but it's easy to push it in not far enough.
Yeah I even unscrewed the remote. what am I doing wrong should I leave it on or off when charging and how long should it take?