Special Tools? NOPE! Ford Transit Ball Joints Using Sacrificial Bolts
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2023
- Bent Frame Bolts! Easy Job Escalated! Ford Transit 3.7 • Bent Frame Bolts! Easy...
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on TH-cam, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Located in Florida? Need work done?? Visit www.RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to - ยานยนต์และพาหนะ
Ford: "You need a special tool to install these ball joints."
Ray: "Hold my beer."
Persistence pays payoffs.
The shop is looking spiffier and the team is getting things organized.
Heart was in my mouth, waiting for one of the sacrificial studs to shear off, leaving us in what’s becoming a familiar situation for Ray.
Makes me wonder how many cars he has worked on that are running around with stripped nuts and bolts coming lose.
dozen of them sitting outside for various damages, previously fired probably customers complained about these kind of creative hacking.@@ateam6486
He could have cracked the hub, he damaged the wishbone bolts, he definitely damaged the bolt holes that ensure the balljoint is held in. He's certainly a cowboy.
🤣@@J-D Let me guess, you'd have bought the $600 tool from Ford, written off the profit from the whole job, put the tool in your toolbox and probably never used it again?
@@timjohnun4297 that's the problem with reading into what someone is saying. Just bad technique in his part, didn't chill the part, didn't hear the hub, no lube, not even wd30, hitting bolts into the holes, gunning bilts before ensuring they're threaded ( one of the suspension bolts clearly binds before he tightens it fully, ) skipped the heat shield and shim, gunned every bolt and didn't check a single one with a ratchet let alone a torque wrench. No lube on anything. Need I say more? His idea may have worked however it could have been done better.... and that vehicle is definitely not road safe.
We have a saying, here in Britain; these ‘special’ tools are sold in stores with ‘big windows’ for a reason - so they can see us coming! Well done for finding a way around it. Excellent video.
Many years ago I did a break job on a sierra, which stated I need “specialist ford tool 09”. £30. 😮 It was a ‘C’ spanner, but what I actually used was a the shank of a screwdriver to wind in the piston.
Customer states you will need a 600 dollar tool for this job
As I said in my comment to part 1, if you use longer lengths of studding, a 3/4" drive socket (or cup as you used there) big enough to fit over the balljoint and a heavy gauge plate under it, you can draw the balljoint all the way in without risking bending the flange, or damaging the threads. I've replaced lots of them using this method, when I was maintaining a fleet of Transits in the UK.
A perfect example of how to do it the easy way.
Unfortunately Ray either doesn't read all the comments or he doesn't like suggestions.
I've made suggestions on a few videos but it made no odds.
Unfortunately he's his own worst enemy sometimes.
@@TheOriginalDaveJ agreed he is his worst enemy sometimes
Or just stack half a dozen washers on each stud between the nut and the flange, so he can use the nuts to drive the joint all the way home without running out of thread on the stud.
one stooge neither learns, understands physics, nor is he humble enough to learn from mechanics that do the thing daily, even diy knows to prelube , preheat, prefreeze,,,
Ppl don't know how to set up a ball joint press anymore 😢
great work Ray. You have more patience and determination than I do :-)
What I find impressive is how Ray has a lot of problems and things that aren’t so straightforward but doesn’t seem to get to stressed and always keeps videoing. I know that I would have thrown the camera at times but I’ve never seen Ray get frustrated with getting the shot. Great job Ray.👏
I find that is one reason why I watch these videos.
Same here. Along with his technical skills, he demonstrates much restraint when facing challenging conditions.
Well done Ray!
You will note that you have never seen a BMW in his shop.....
He said it once, he edit his videos and cut those parts out.
@@Drekulviin I would make a great deal of sense. Not that I have seen it but it seems like he has a guardian angel. I have been in stressful situations regarding the machinery I was in charge of. I would be covered in grease and crap and a coffee was enough to make me go off the rails let alone having to worry about filming it lol
Great work Ray, I was a field service mechanic for 46 years and thinking out of the box is normal when the job requires it. Again great job.
Fine job Ray, I have one of these fine vehicles waiting on my rack for tomorrow morning. I am in Ohio and there are holes in the subframe and none of the bolts will budge...I'm planning on cutting anything in my way getting to the trans pan to replace the lead frame. I guess its going to be a well planned out controlled slaughtering
These channels always have guys asking for toolbox/shop tours. I’m over here wanting to see Rays epic collection of lights. That’s the tour I want.
Put the ball joints in the freezer overnight and heat up the knuckle with a map torch and they will fall in the hole
If you lived in the rust belt you might put never seize on the ball joint before inserting it. And this would assist the next owner of the ball joint when he gets it from the scrap yard.
I put that stuff on almost everything 😂😂😂😂
As a few people have said freeze ball joints the night before and use a bottle jack in centre.
Lower the car and the weight does it for you.
So much of that front bumper support assembly seems like the engineers forgot that they needed those crash bar supports until they were almost finished and just threw it in there at the end.
They actually are. The transits here in europe do not have those. And since this is a european design, the USA version is probably redesigned for American regulations.
Glad it worked out Ray. It's asking a lot from the studs when using pinch nuts to press in ball joints. You are literally "Pressing Your Luck!" lol.
Ray is the true Master Mechanic! Great work around getting those new ball joints in! Working on different types of cars, Ray knows how to adapt and tackle the tricky jobs.👍
Good morning sir! hope you're day is awesome and productive my TH-cam friend
Hi Ray, I noticed on the video where you removed the ball joints on this van, there was a thin piece of stamped metal sandwiched between the ball joint flange and mount. I'm guessing these were heat shields to protect the ball joint from the heat coming off the brake disc. I see you didn't reinstall these with the new ball joints and I hope it doesn't lead to premature failure of the new ball joints.
Another episode of a brilliant out-of-the 📦solution. Well done, Ray 👍
Yep he takes the parts out of the box and bam problem solved lol
@@lechatbotte. Well played, sir! Well played! 👍
I like the can of Glade in the cup holder. Thats funny.
There was a spacer between the old ball joint and the knuckle. Now that the new ball joint has already been pressed in, my “expert hindsight”😊 wonders if it needed to be in there.
I noticed that too! 🤔🧐
its a spacer but also a has a shield to protect ball joint rubber
Why have loctite on the screws then?
Nice catch. I’ll have to go back and look at that.👏
I was looking for this comment. It seems like a clear oversight from Ray.
You use a fair amount of silicone on your spark plug boots, maybe a good idea to use a little grease, ant-seize, etc on your bolts and splines??
I would have put some oil on the ball joint OD when pressing it in. Nice work again.
Next time you have a job like that put the ball joints in the freezer and apply a bit of heat to the knuckle casting - makes it easier to get the ball joints in to seat
Freeze the ball joint for an hour. The metal will shrink about.002 of an inch. This will make the ball joint easier to fit in to the knuckle. 😊
Put the ball joint in the freezer (it will shrink), heat the receiving part until red hot (it will expand), apply.
I always use the freezer method for press-in parts. It makes pressing a lot easier.
Yep! We used to do a lot of "Heat this, Chill that and assemble before the temps equalize" back when I was building jet engines.
Y calentar el orificio que hace que éste se expanda y abra, facilitando la introducción del cuerpo de la rótula. No olvidar un lubricante, para evitar fricción extra o recalentamientos si el diámetro es pequeño.
Cualquier interpretación, será a vuestro propio riesgo. 😅
a hack too proud to learn your advice, and too dumb to understand physics.
Not always feasible in a shop
Dry Ice generally available in metro areas, possibly even still available at Baskin Robbins. I once made the mistake of going to my sisters for dinner, bringing a quart of ice cream, with a chunk of dry ice in the bag..... put the whole bag in her freezer... by dessert time we had a quart of concrete... two days in freezer before it would yield to a scoop. Memories.@@gimmeaford9454
Those kind of bushings are a pain but......
Creat a slight chamfer on the first 1/4 inch of the ball joint body with a flapperwheel (on an angle grinder) .
Polish off the chamfer with fine emery.
Smear assembly grease around all the press fit areas.
Still goes on tight but wont bend flanges or chance wiping out threads. .
I would have used the original bolts that you first tried but a nut at the flange. That way you can hold back on the bolt while tightening up the nut . this assembnbly prevents the chances of tearing up the mounting threads.
I never use a power tool when pressing in ball joints and bushings. A spanner gives a better feel for what is happening as the press fit task is done.
When I worked for a company called break parts (a division of echlin vehicle parts) when we pressed anything we used WD40 it provides a little lube but dries out over a couple hours.. we did this on clean drilled holes when we pressed in studs.. with WD40 it took 2000 pounds pressure.. without it, it took almost 2x the pressure
Thanks!
To help anyone reading, and for the next one you do, for the re-install all you need is the correct diameter closed cup out of your run of the mill ball joint press kit and the fit is loose enough I've been able to use the cup and my air hammer (snap-on current gen) with the standard hammer head bit and drive them in. Just make sure you either use studs or you can even red neck it and use screw drivers or longer bolts from around the shop to line up your holes. The way you do it here bends the flanges. My way uses the surface area around the joint evenly and is pretty fast! Keep turning out them hours brothers
Excellent job Ray ,A mechanic is someone who can always figure things out even though he does not have those special tools great video.
Good thinking !
Ray you always find a way!! Great series!
thankyou Ray,,another educational but more importantly entertaining upload,
have a good weekend,,👌👍
Woo Hoo Another successful repair by Ray!!
Nothing like using some TAMMER HAPS😂😂😂. now that had me rolling. But they come in handy🤣🤣🤣
Fridge and gas torch..... Cool the ball joint, heat the casting
excellent job ray,,,really well done!
Hi Ray, to get the angle of the control arms to level out before tightening the front rubber bush bolts the van wheels not only have to be resting on the floor, the van also has to be wheeled back and forth a little way (to get rid of outward tyre friction on the floor) this will allow the front wheel track to widen as the angle of the control arms flatten out with the weight of the van.
Morning Ray!
Oliver Antony AGAIN TODAY? I love that artist. He’s the new Jason Aldean
It’s on repeat 😉
I agree with the freezer method oh by the way Ray I love the Oliver Anthony music in the background 👍🤠❤️
Nicely improvised.👍
Corner break the top edge of balljoint with segmented abrasive wheel and apply high temp copper antiseize.
50% less force needed.
Contrary to popular belief, antiseize will allow pressfit to hold better by eliminating galling of dry assem😊bly.
Lol Oliver Anthony in the back ground.
Ray as ever, your substitution superpower hit a home run changing a ridiculous expensive tool install into a semi-basic tool exercise. Your analytical skills are awesome. Respect from downunder.
Thank you again sensai for the lesson with the ball joints. Excellent content.
Yeah but you forgot installing the heat shields from the old ball joints that go in the square holes behind the ball joint seen at 1: 54 and 9: 59 min.
Beautiful work! ❤
"Adapt and overcome" would be a great mission statement for your shop Ray. Your ability to create the means and methodology to overcome obstacles daily exhibits a high level of practical reasoning and logic. Troy is fortunate to have you as a mentor.
That job is a proper area for swerking. Swearing while Working. Proud of you Ray for not doing what I would have done!
I would put a Torch on Ball Joint Shackle and make it Expand so Ball Joint would Slid in much easier...
Thinking out of the box ! Yes sir !!
1:46 I'm surprised you didn't stick ball joints in a freezer and heat the steering knuckle to get it ready with lube.
Another great job ray!!! Thanks!!!
9:16 My favorite trim tool for so many different things and yes, it works wonderful as well as the bigger kind of pry bar trim tool has worked very well for other things as well that you don’t want to mess up
My favorite part of these videos is hearing the music in the background. We listen to the same shit keep kicking ass screw the haters
Good job.
After that destructive dissembly yesterday, I'm glade to see today with a little ingenuity you avoided buying special tools.Have a great day
A true Systems Modification Engineer.
That was fun to watch ray ray I definitely enjoyed it 😊😊😊😊
I agree 👍 💯 about making my own special tools and saving money 💰. Another great idea, good work. Love your channel ❤️ 💕. Hello from Pa USA 🇺🇸. Thanks.
"I'm only made of, erm, Human" - made me lough out loud - thank you Ray, you brighten my day! 😂
Great video
Another very nice video. Awesome job by the way!
Nice repair papa bear. The old saying, if there's a will, there's a way.
The shop walls look very nice.
Weight on wheels before tightening - pleased ..very good :)
I'm drooling over your power tools..
Barbados.......Alfred, I do mechanics and I love working on suspensions ,you did a great job .
Hi Ray. About those press-fit ball joints, what about heating the steering knuckle in that area with some FIRE! Yeah, fire. Because expanding metal gets hot. No, wait, that’s not it. Hot metal expands. There we go. Language. 😊
I appreciate whatever radio channel or playlist you guys are using over there.
You young guns and your battery non torquages are still a wonder. I've never felt failure when clickages are noticed. Keep than new speed mechanic stuff on the regular my man. We respect those things.
Love the videos Ray can't wait to see the next one ❤❤😊😊
Dude you really are the man . Dang that was pretty dang awesome I was really hoping that it all went smoothly and it did . Great job man . Bravo 👏
Did a Volvo that had the same design, except Volvo uses an adapter you simply hammer on. I used a large socket and hammer. Next time I will order the adapter, its cheap enough. Same deal with order of operations to make everything fit. I found the ball joint wasn't seated completely, tap and tighten until the bolts stay tight. First time I did one of that design but common sense tells you what to do. This Volvo used an aluminum LCA, the ball joint was part of the arm, but the new arm did not come with it, thanks Moog!! The BJ hole was closed end too.
Ray, I know mechanic work is not easy. You did a great job improvising with the tools you have, you make it look easy. I really like watching your videos on TH-cam, it's very educational. 👍
Oddly satisfying to watch it all go together.
Good Day Ray
over yonder!!!!love it!
What ever work, some tools have to be modified to get the job done.
Ray's videos is like a video book that he can go back to as many job's don't go the same way and help let the customer see what he did to fix the problem and when he looks over the vehicle's to access what needs to be replaced, what is more important to fix now and needs attention a few months down the road as he looks out for customers pocket.
That's why he has a great following, a family run business is great.
Love the channel
You definitely earned your money on this one, Ray. Nice job!!
Hahaha loved that line..”…if not I’d have to of disassembled myself into a corner…”
Freeze the ball joint and heat the part on the vehicle, which will give you some tolerance.
I'd put the ball joint in the freezer overnight, heat the socket hole with propane flame then slip the ball joint in quickly. Might need to run the two bolts up to lock it into position while the joint and the socket resume normal size and lock together.
If you are ever doing the wheel bearing, strut and ball joint on a Transit, Ford sells a pre-assembled steering knuckle and strut assembly with it all on there already.
Wondered why you didn't use two impacts working simultaneously?
That would have put equal force on the part, assuming you kept the part with equal pressure through your skill of impact operation.
Used to hearing 4 Non-Blondes singing "What's Up". Now, it's Oliver Anthony with "Rich Men North of Richmond". The times, they are a-changin'.
Thanks Ray you are the man when it comes to custom tools "we don't need no stinking special tools".
Wow the second ball joint you did went so much smoother. I really didn't see the flames bend. Although I am a little bit inebriated right now. I think you did a great job. I hated doing press in ball joints.
Hey, I love the sound of Oliver Anthony in the background starting at about 28:00 .
I'm really digging your new background music.
Even if Ray has a freezer at the shop, most of the time he gets the new parts as he is working on the car. Doesn’t have time to wait a few hours for the part to get cold enough to shrink. Ok if you get the part today an won’t work on the car until tomorrow. You still have to remember to put the part in the freezer. LOL😮👍🇺🇸
Everything is a hammer love it.
Looking good on the left. Looking good on the right. Looking good on the firing line.
Freezing ball joints prior to install ? Guys, what do you think?
great method to press in the ball joints! it is bad how the front end is damaged and you have to
adjust mounting parts. great video, can not wait for the next one!
looks like a loose enough fit for the freezer method to work.
Rays is like my father was, "I'm not paying that much for a one-time-use tool! I'll mickeyrig a tool!" lol