IS200- Budget Drifter
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2019
- Benny’s budget drift car isn’t allowed back on the public roads after being rear ended and written off.
It is therefore the perfect candidate for some side ways spaghetti action!
First off, he will need to give it a tidy up in preparation for tapping walls & trading paint at the track.
Benny's Custom Works brings you everything automotive!
Weekly Episodes right here on TH-cam, as well as the shop with new & used performance parts for most Japanese makes and models.
/ bennyscustomworks
/ bennyscustomworks
Benny makes this stuff look like a walk in the park. Please consider the risk factors and talk to a qualified mechanic, as well as a psychologist, if you’re thinking of attempting anything you’ve seen on the show.
Take into consideration your safety, the safety of others, as well as your vehicle’s best interests- warranty, etc.
Unless you’re trained & qualified to do so, we don’t recommend modifying your vehicle in any way. Stickers don’t add HP unless installed correctly. - ยานยนต์และพาหนะ
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
Removes cheap plastic trunk latch cover
"Now it's a Toyota, not a Lexus."
Truth 1000000%
Love the Big Lez show reference!
And if Nolan has done the fix *long inhale “thing’ll never be better”
We bought all the AU Falcons
Back the mic up a bit Benny..... all that heavy breathing got me slightly aroused. lol.
Darth benny :D
firecrakka The mic is the correct distance, he just needs a filter on it.
Yes. Please breathe through your nose or don't wear a mic. I couldn't finish the video and really wanted to watch the whole thing. I like you Benny but please fix the mouth breathing thing.
'I do love a quality restoration; I'll let you know when we do one!' PMSL @ ya Benny!
20/10 for the trash talk, good stuff boys. Keen to see this thing sling sideways into Cheryl
"I'm not really into aesthetics"
*swaps headlights because he doesn't like the "look"*
Wahhhh
And brake lights
"Give it that au falcon look"
The Lexus lights did suck though 🤣
Don't blame him - some things are just unacceptable
This is every Irish lads dream vid, right before Donegal rally aswell😂
it just needs a set of cuts and a big window sticker and it's ready for king of the cone 😂
Something that says Ejaculate and evacuate
Anyone agree there is never a boring video to found on this channel? thank you!.
Yeah, nah, nah, nah, mate. Mike Nolan woulda done that neon install for a cashie while doing 480km/h over the Mooney Mooney bridge in his Patrol fair dinkum.
I have an Altezza over here in NZ. It's really cool to see someone finally doing something with the is/altezza platform!
This is literally my favourite channel. Love this bloke
This episode feels like a real world Benny!
Really enjoying your insight, dry wit and stickers over potential sponsors.
Keep up the great work.
Love the new project. Looking forward to seeing it come together.
Stoked to watch this series Benny. Also awesome intro!
good to see another quality aussie youtuber. Keep up the good work!!
Next car def needs to be a au falcon
I want to say thank you Benny. These little "tricks" of the trade and shop knowledge tidbits are truly valuable pieces of knowledge. It's not stuff you learn in a book. You only learn this stuff working in the shop and running into problems you need a creative solution for. And it's priceless knowledge once you know it. The little things like showing us how to hold up the Transmission when you pull the engine, with a ratcheting jack supported on the front member. And pull off the old oil filter with the new filters box so you can keep your hands clean. It's such great knowledge to have and I want to thank you for sharing it.
Ok Beeny this is a great vid so far! I really like how you are actually showing how to, aswell as being very descriptive! Keep it hoss
Great start to the series, loving the music, and yeah, I've done a similar injury with a flat blade screwdriver, feeling your pain 👍🏼👍🏼👍🏼👍🏼
Loving the videos Benny, keep it up!
Learned to drive in one of these, had one in the family for 12 years (from new) too - genuinely great cars.
Awesome i’m going to like this build series 👍 thank you Benny
Looking forward to the rest of this series for sure
Yeah Benny,
Old School MCM style...Grab that front bar!
This is one of my favorite all time cars. Im stoked as to see what you do with this benny!!! #DOPE and in stealth blaaaaaaack!!! #SUPERDOPE
Love Benny’s one liners!
Ahhh Benny loving the banta and big lez referencing... keep it up :)
Good stuff, looking forward to seeing what tricks of the trade are employed when registration isn't part of the end goal!
NO WAY man, you've got a channel. AWESOME. Subscribed. Keep up the content!
Best episode yet Benny!
Love the video Benny, I feel your pain on the flat-blade mishaps, done it myself lots of times, even when I know its about to happen anyway. Keep up the great work :)
I am loving your new channel Benny, such great and detailed content. The MCM gang are taking over the interballs!
Yesss! The bumper walk returns
love the build already, keep it up man
Going side ways, Excited for this series!
I used to have one like this. Pearl white paint, sand brown leather interior. First love of my life. :)
Back on point Benny, good ep. I enjoyed it and your humour.
Loving the channel Benny
Actually a really good platform to work with and super cheap now, interesting to see what can be done to that 1G-FE engine, Car Throttle had a build series on one a few years back and turned out pretty damn sweet.
Very excited about this one
Can't wait to see more
Looking forward to it, want to do the same with my is200. Already swapped in an lsd, skid pan booked for next week
A tip i learned from school is for thinner metal is if you beat and smash it to much and it gets like a tin can where you can pop it in and out is take a torch and heat the metal up until starts turning a little red then hit it with water or air and it will shrink itself and tighten up. Obviously be careful with an open flame and dont use it on structure areas as it makes the metal brittle and weak by heating it up. More for when you need to be picky about the repair. Hope it helps, try it out. Thanks for the content Benny! Hope to see you soon at drag week
Nice project. Used to do the same with my old cars, throwing off all the junk from previous owners and get the car clean again is a good feeling.
Got it looking good mate. I really like the new tail lights.
Cost of manual ls200's has just gone up
Easy enough to get a nan driven auto and swap it.
Great video keep coming. Thanks.
Good morning sir and thank you. i like your ideas about the build.
Wicked I've got some very similar damage to straighten out! Didn't even think of the tie down mounts!!!!!
I had to do the same when my EF falcon got rear ended. But I used a seat belt and bolted it down. Then attached em to a mother cars tow bar the drove my ef forward. Mine was a lot worse than the is200 but came out pretty sweet. Ended up loving the ef for a few more years before it was torn down and stripped.
I remember the Toyota Altezza from Gran Turismo 2. I wanted a IS300 because of them for so long.
I've always liked these cars but they're so much money in canada, specially for a manual. This makes me want to look for one again. Cant wait to see more!
i got mine for $2800 in nz. needed a car, wasnt quite what i wanted but as i said. i needed a car to get to and from work. the old levin was dying on me.
got it with 226,000 kms. now has 270,000 a few years later, had to replace a few ignition coils. the tyres, rear pads, and some bulbs. thats it. nice reliable car.
really wanted the rs200 4 cylinder version with the 3sge 2.0L 210hp 6 speed manual, limited slip diff etc.. but i got the as200 6 cylinder with the 1gfe 2.0L 160hp 4 speed auto, OPEN diff... oh well, still fun and slippery in the wet. and a really nice daily driver. and a damn beautiful car.
that open diff is a pain though. i hate only spinning one wheel. you have to really throw the thing to get it properly sideways and spinning both wheels, especially given its a damn automatic. oh well. as i said, fun in the wet. and as a bonus if you can only get it sideways in the wet. your tyres last ALOT longer..
pretty sure if this guy is serious about making this just a fun drift car etc. he will weld the diff. it would be super fun and slippery then :-)
You could always build some steel bash bars later on aswell.
Oh no, it's DIY body work! Brace yourselves, "Comments" from the "Pros" are coming.
Enjoyable episode Benny
Great episode I enjoyed it keep it up 👍
love bits at the end of the video
11:07 "If Mike Nolan was a panel beater, he would'a put this tail light bucket in." Hahahaha best thing I've heard in ages.
Keen for the diff welding episode
Mad. Always thought about modding one of these
from a panel beater; use a bigger hammer and hold a block of wood on what you want to hit to spread the force out and not cause huge damage.
On ya. Sledgie with the handle cut down works mint for that chit.
I love bennys banter.
I’ve been waiting for this :)
That was really good. Best BCW yet.
good vid Benny
Looks like fun Benny😉😊👍👍
I can smell a 1j or 2j coming soon! Looking forward to seeing it Benny.
Drift In Japan if he was cool it would have a beams.
That tail lights make it look like a BA-BF rear end now Benny...close enough to the AU. 👍
What the hell Benny! I didn’t know you had a channel? Should mention that when your in MCM. Subscribed now.
Love hammering a bit of beaver
If you use the emergency scissor jack in the boot and a few lengths of timber you can push that back panel out really easily. Use timber across the spare wheel well and jack from there..... Don't ask how I know this lol
Finally someone else that has the same box opening method as I do. Use whatever is near you to cut the tape.
Keys, a pencil, spanner, anything really 😂😂
What about a fuel injector?
The "Mike Nolan" reference wasn't lost "Fiddy bucks mate, cash"
What a nice surprise, can't wait for an update. Looks like you have the Sport version with torsen LSD. Good choice, but for drifting people rather used welded open -diff. Try it with torsen and you'll see. Btw. if you are planning on keeping it stock for a while long, maybe you should visit Rank One Performance page, where you can get eg lightweight flywheel or supercharger kit.
Hahaha yes!!! Love the name Benny. Gone to new level of awesome
Best vid yet
Nah nollsy would have secured it with ciggy butts.
Ciggy Butt Brain
Gimme me loitahh
Nollsy only does quality work, his track record shows he can do any job proficiently. At least, good enough for government work.. but cashinhand
oh yeah nah oh yeah nah oh yeah nah
Had the 3 liter (2JZ-GE) version of one of these here in the US. Fantastic looking cars, but pretty underwhelming stock. Nice thing is there is ton's of aftermarket support for them. Definitely looking forward to this build.
We got the IS300 aswell a few years after. 👍 Trust me, if you think the 300 is underwhelming, the 200 will make you think a Miata is fast. 🤦
Cool beater Benny
IMO "this" is the better Benny, nothing wrong with previous videos on the channel, just seems more you.
It was the same with The Skid Factory. At first they seemed a bit stiff and timid in front of the camera, but they started loosening up fairly quickly. Guess Benny is just following the natural learning curve of being a good presenter.
Yay new video!
19:12 Sounds like Marty laughing. Hahaha.
Never know you may be a natural drifter lols Benny
When you want to align stuff how you want to do use a short 2 x 4 to spread the force across a bigger area and align things better that way. My father owned a body shop and I worked there for many years
Do love a quailty refurbishment can't wait till we do one 😂 🤣 had me 😂
You got me on this one benny
:)
Changes address to buy cars lol I love it!
Looking forward to skids at the skidpan again Benny, I’ll bring my crusty RT142
I like where this is going Benny. Im in the same boat as you but i got a bit more work to do, mine is fagamatic. Im planning engine swapping it with a 1jzgte vvti and cd009 gearbox
Portapowers work great for rear end and quarter repairs
Come on Benny haha dying to see drag week video
James Dixon it finished 2 days ago .
I think a lot of young people who want to get into drifting need to watch this series on the IS200 to show them that it's not about spending
$100 000 on a car. At the learning stage it's about seat time and having some fun.
Exactly. Get a rear wheel drive car that is so cheap that you don't worry about thrashing the tits off it. Make all the beginner mistakes that everyone go through. Have it ceremoniously crushed while drinking beer once it is beyond salvage.... THEN it makes sense to start building something "proper".
Wise words there.
A good driver in a crap car will almost always beat a crap driver in a good car.
Slow, crappy cars make you a better driver in the beginning and less tears are shed when you inevitably lunch it and get intimate with the barrier.
the internet needs more of this - Mechanical Stig FTW
how have i only just discovered this channel!!!!! first off, benny done your unicorn fuel pumps yet?
That stereo power cable... I made that mistake in my old Astra. Fitted a big stereo with a 0AWG power cable to the boot... stereo got nicked but I didn't take out or disconnect the wiring. Had the circuit breaker in the wrong place... set fire to the wiring loom down that side of the car and killed it. That was a fun day...
Doing better than a guy I know who installed his head-deck with those professional twist the bare wires together connectors and this somehow caused his car to spontaneously combust at a set of traffic lights and burnt to the ground. Insurance declined his claim due to vehicle components not being fitted by a qualified installer.
Thanks Benny :)
How have I only just found this channel?!
nosey reference was on point
More hits than? I love the name Elvis regardless!
Benny, I once put a 12 gauge self drilling screw through my hand, that sucked! I had to tell the doctor lefty loose righty tightly so she could get it out! I love your shit, keep it up!