ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2022
- The most explained tutorial about how to code BMW FRM(Footwell) module which includes:
- Installing BMW Standard Tools
- Updating BMW Standard Tools database
- Installing drivers
- Configuring
- Code FRM with BMW Standard Tools and K+Dcan cable
The links:
Coding tools: www.bimmergeeks.net/downloads
FTD drivers: ftdichip.com/drivers/vcp-driv...
REG path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\FTDIBUS\{Device VID, PID and serial number}\0000\Device Parameters
![โจทย์โหดเหมือนโกรธเป็ดถีบ [อะไรอยู่บนหัวกูวะ ... EP.4]](http://i.ytimg.com/vi/Dqlb7EZ9PGk/mqdefault.jpg)
I like this guy!!! He went over in detail for people that like to code. Thanks for this video.
I spoke to soon, I guess you can't download the files anymore. 😞
@@luchfortedid you find them elsewhere
Thanks for your info sir.its very clearly ,special thanks.
thx for the info, i'll try tomorrow to code the FRM module
Did it work for you?
That's a really amazing video an your the best.
But what makes me worry and think to study more is doing different types of rfm.
Thank you man! Way better & easier than taking out The module, welding wires to do the same job! I have my frm3 corrupted twice now! Just shipped to those eBay guys to repair , if had know this steps I would hv done it myself! But great to know for future!
for what i can see, would you click on reset? or would it be like coding?
@@orlanmedina3693 its just you have to install the softwares correctly and configure it to your car's model, then you go through the steps to rewrite the software on the already corrupted one, the existing software/codes stopped communicating with the case cause when the power levels goes lower numbers of times as set/finished loop numbers set it shuts down the system to protect the entire module to go bad.
@@ananias- I just had my frm3 corrupted on my E90 , will this video help to rewrite the corrupted software if I understand you coreectly?
@@mzansipunters4295 same did it work for u
Hey! Thanks!! I replaced my water damaged frm2 module in my mini 07.. with your explanation it worked like a charm.. so thanks a lot!
Ps.. bummer geeks doesn’t have downloads on their main page anymore. But if you use /downloads behind the main url you’ll be directed to the download page.
Did you use a virginized FRM or a used one where you had to update to your VIN?
reason for my question is:
I retrofitted xenon headlights in my E90 LCI and need a fitting FRM - if i could use a used one would save quite some money since a used one cost about a quarter of a new frm3
No! I just got a second hand one. Plugged it in and followed the steps..
@@user-bx4qx6xf2c
thats some owesome Info -THANKS!!
Great videos!!! You should make a video on how to change the power class on the msv80. Everyone always talks about it can't be done without resetting the working hours and doing it does not provide extra power. Then, why is it there 😂 I can't remember if the issue lies with changing the cas or 6mbot category. Changing it to wert2 always causes an error.
Thanks Randy
really impressive. So clear and precise. Even a novice can follow without issues. I will definitely try it on my E70 as my headlights are not working as they should. I bought this car a few weeks ago and when i connect my scan tool it asks me as to which one to choose, the CAS or FRM because the VIN on these two modules are shown as different so i presume it was not coded correctly. I will follow your instructions and see what happens, i hope i can get the lights to work bright as they should
How did you make out?
Thank you
Thank you eboy. First of all congratulations for an excellent/detailed instructions. I have a problem though that maybe you can help - I have to use a Enet cable as it is to code a F07 series FRM. The cable is detected if I use e-sys or Ista, but not able to get the connection with any of the software within standard Tools!
Very nice and clear explanation! I'm going to exchange my e87's Frm1 with a Frm2 this weekend (because of xenon headlights), with this explanation I think it won't be difficult to program. I hope there will be some more cool options in the Frm2, but I'll probably figure that out with Bimmercode ;) .Do you also know how to program the xenon headlights once I have them installed?
Unfortunately nope, but I guess its just an option you have to enable. according to google: "FRM2 is coding with FA $522" (For e90, but should be the same) Also you can look around FRM2 options in NCS Dummy
Thanks bro , Very usefull video , same process can be used for other modules ?
thank you very much it is nice video /I had e60 my abs dsc unit went out I got the rebuild one to replace but I really don't know how to inpa software to bleed the unit or brake ,I already installed the bimmer geek just need to know how to used the right one please help thanks again
Hi eboy, extremely grateful for the video. I also have an E70, however I am getting the following error when coding a new DME (Please check interface: PABD, P-SGBD), when using WinKFP. Many thanks
Thanks for the video........will this also work with Mini and FRM2 ?
Great video. Thank you so much! Im following along @14:25 the "update WinKFP" is not working.. is this step crucial? The alert on my system is saying data not found.. Thank you for posting.
hi bimmergeeks downloads not available any more , is there any other software can be used instead? thanks
The link has been closed from the source. What is the alternative?
Hi there thank you very much for this, so clear and precise, I'm just a little confused about the very last step though where you say you have to change it again could you help me understand that part please?
Can you please specify time frame or explain a bit more what you havent got
Hi I saw your video it Is amazing can I coding my door module on my e70
Hi this is a fantastic video and there is no hidden things , you explain things very well. i have a small question when i check the SP-Datens i could not find the information for e90 . is it ok or should i worry ??
use e89 sp-datens
I have to code HSR modul( its for rear steering wheels).. Is it the same procedure like this, just to select HSR modul instead your FRM modul?
Do you know if the part number must be the same I found a module that is -02 at the end and mine is -01, all the other numbers match up perfectly. Do you know if the -02 will work?
Hello boss chief,
Will this procedure work for a “used/refurbished” Footwell Module if the original is replaced?
The refurbished one works, but it shows the “car on lift red symbol” in the dashboard.
So, I believe I need to encode and program the used FRM Module into my 2011 328i xDrive.
Hey eboy, one question: have you ever changed a Mask? All I know is that you have to change the FA-Number. do you know something about this procedure? I try many times to do this, but I don't know how to do it in the right way. May you can make also a video about these steps.
Best regards🤙
Unfortunately never did that(
Is the FRM3 new or can fix with the program? The FRM3 requires to flash install and used inpa to code???
Should I study mechanical engineering or electrical engineering to work like this and tuning the ecu the gearbox, etc
Hi, Thanks for the tutorial!
Could you let me know if I can do coding for JBE module without external power supply for battery? I couldn't find info on it online
If its something fast than yes
I have a nfrm but i wanna place frm2 , them select frm2 right ? Not the nfrm
That a great way to explain of how to download and use it. Thank you. I have one problem when I open WinKFP I get a pop up and when I press ok the WinKFP closes. So what was the purpose of WinKFP ? I didn’t see you used the file from there any place. Could I continue without use the WinKFP?
I have problem with me reverse light don’t come on when I put the gear in R. But when I activate the reverse light with the scanner they turn on. Maybe I need to code that in the frm module. Thank you for any answer.
Hi, I do not really use WinKFP, its for updating modules, but with ODB cables it takes ages
About reverse lights, there some codings for that. Usually I do that with bimmercode
@@eboy8313 thanks for answering. I just fix mine, it need it to code the light module(LCM) and they works now finally
hello very good work, I wanted to ask you a question, can do the same for a mini cooper r50 2002, I have a problem with my frm
do you think we can do the same thank you
Hi, unfortunately I do not have mini around
BImmergeeks no longer offers this download free of charge. Are there any alternatives?
Hello eboy,
Can any j2534 passthrough cable like Mongoose work here?
hi, can you tell me whether to replace All with the letters FF on the airbag computer to reinstall the crash. because my device does not erase automatically. THANK YOU
Unfortunately I dont know
Is there anyway to get this software the website provided stopped with the software downloads. THANKS
This looks nice and easy, but I've got probmlem when install this and when klick ec. NCS dummy or coding tools it change my impa back to 5.0.6. version Mike's easy BMW tools why it change this back, I'm not so good on this but is there any help for me with this issue? Do I need to delete mike's files all or what is correction of this. thanks for help!
Sorry but I havent got your issue
@eboy Hi can I code a module that was previously used on another similar car or it has to be a new module?
It can be used module from the similar car, actually it has to be similar module (with the compatible part number) cos bmw used that modules in a dozen of the cars
@@eboy8313 I cant get the e90 datem files please help
@digitalupdates3824 did you find the E90 files?
Hi, qustion is while we coding the car, can we run the engine? Thank you.
Actually, not 100% sure, you can, but I would not recommend it at all. If you have bad battery just use a charger
Hi, trying to help a friend with a 750il. There is no communication with dme. Would like to reprogram all modules at the same time, is it possible? Which program should I use to do this?
Thanks ahead.
I saw people say that never relrogram all modules at ones. One by one is better,because all takes a long time and you can have drain battery and interrupt connection and mess up all.
OMG😭, That cooding-tool downroad rink was closed..... is there any way to get ?
Hello, thanks for the video.
I have an e46 and I changed my headlights from halogen to xenon, when I enter to ncs expert to code, I choose profile and chassis then when it tries to connect I get an error Vin is faulty coapi 2020 .... IFH-0009 ... Around 20 faults..
But when I use INPA it works without problem 😕
Please if you can help me on how to fix this problem?
Many reasons can it be, as an option I can recommend to update, or change, sp-daten
@user-pt4bj7pj7t I have a switch in the cable I changed the position and it worked
Hi there, I have BMW 328i 2011 ( all window/mirror/light is not working after we did jumpstart the car as left ran out battery) and it sound like my FRM (Footwell) corrupted. Could you help me with step by step how to recover on FRM ? Thank
Hi, You need to repair your FRM corrupted EEPROM data...though you must have a proper tool to do that. You can find the video on TH-cam
@@beamautoKE somebody said here, its possible to do it with this procedure. i gues it would be the tab "reset"?
Have you worked with Hitag-2 V3.1?
unfortunately no
can i activate apple carplay with this programs in bmw x1 2020 ?
The following text is super simplified for understanding: there are two levels we can deal with: low level (modules) and high level software (programs, like app in your phone). to program modules we use icom/can/... cables. For the software part usually its a usb stick with. Basically its something similar to jailbrake.
My e93 yesterday the window dont want to go up or down with the switches i checked the fuse box and its good i think it frm can i code it using this to fix the issue?
Hey. I have the the same problem with newly bought E93. Master window switch is not working, but windows are rolling down with the remote and passenger window switch is also working. Did you find the solution?
Looks like FRM, failed frm lights up all the indicators on the cluster, turn on wipers, windows dont work. If it happens you have two way - repair it, or replace it. This is the manual for replacing
Just a quick update on my e93. It was faulty master window switch. Ordered one from Aliexpress for 20$, everything works
@@eboy8313 i didnt know the FRM had to do with the cluster malfunction, because it doesnt work either
Hi I’m facing a problem it’s says can be installed in windows xp
why i didnt see e84 model ? my car is e84 and i need to do this
Hi, any one know how to code my new ccc, I have a 2006 330xi.
Tried to Update the E89 winKFP, but I keep getting an error message half way through the update.
Same
E90 LCI SP-Daten is e89 or F001?
e89
I Will like to buy this tools asap can you please help me please I'm on line
Helo boy from the gud.. You are , dont know words to explain, how do this things and your explaintation is top.. I have installed same like you have do IT, but on inpa when try to sync EWS /dde l get 2 black point and not trdh, that is dde, and nothing, get this red ion..variant kontroll ifh 0009..not respond from ecu.. So my car was staying 3 month and now Just crank not start,on inpa that code is Cas a0b3, Cas 9a0a..everything on car working normal but wont start.. Can not erese code or do nothing with inpa.. Do you have idea what can be.. Its show too about ignition Can signal not valid form
Status imobilasition system
Status passiv acces
Status id sensor
Status keylock
This another its ok..
Soory for my english its not so good but l think you understand me.. 😢😢
Hi, looks like you have a problem with "ACCESS" that why the car wont start. Bad signal can happen for a few reasons: Corrupted CAN in general, or CAS its self, try to disconnect "BAD" modules and see if something is changed. If CAS is dead, you can not do a thing about it cos its "car access system" which controls all about access. So consider swapping a CAS just to isolate the problem. But you have to code it, and thats is not something easy to do, and is completely another story
I have a mhd universal obd thing , can I use that ?
BT adapters wont work
@@eboy8313 wifi ones won't either ?
How can I get the software please
your Coding tools: link en FTD drivers: link is not working 😪 The file you are trying to download is no longer available😪can you pleas make a googel drive map so we can download from yours ?
sorry just saw there's already an explanation in the comments
why e90 is missing?
E90 comes under E89
no offense.... but where is the coding ?.... 95 % is a tutorial for installing INPA and other BMW Tools ..... what did u code about the FRM ???... what functions did u activate or deactivate through the FRM ???.... can i answer it.... nothing .... a waste of time. Have a good day and in my opinion... quit this job
its not and option, this tutorial is for people who replace the original modulo with another new, sometimes you need to code to your vehicle vin other way the new module dont work, no new features etc etc just is a nesesary step to make compatible with your car a replace module
@@barlutytops8655 did u see the title ? "BMW FRM coding...etc"
Hey i have problem with the last step i have done it in my personal E90 so i think my problem is not with the datten files. When i press sg_codieren i get this error
Error in CABD! look at CABI.ERR and ERROR.LOG!
COAPI-2041
I use the right profile for default codding the frm i am trying to code is FRM 1, i have checked it with launch to see if the vin number i programed correct and it is but i am not able to get it to default setting
Hi, what car are you trying to code? and what version of SP-daten did you use?
@@eboy8313 BMW 120d 2006 FRM 1, I had the same problem with my car BMW E90 with frm 3 module, and indeed dated files fixed the problem, but I don’t think that this is the same case, because coding works on my car and on friends e92 325d 2008
Usually that error comes up if you have wrong data in sp-daten. Some people, having that issue, just tried another, related, chassi version. for example e65 can be coded as e70 and backwards
@@eboy8313 The problem is that E89 is code name for both models
en.wikipedia.org/wiki/BMW_1_Series_(E87)#5-door_hatchback_(E87) according to this it is not
i have this error someone help me please 4-12] [SERIE] 2060 PABD/CABD A_PL2FRX.IPS Cod 364 [15:05:44.093] [2023-04-12] [SERIE] Codierung fehlerhaft (allgemein) FRM_87, C_C_AUFTRAG: ERROR_ECU_CONDITIONS_NOT_CORRECT_OR_REQUEST_SEQUENCE_ERROR [15:05:44.196] [2023-04-12] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [15:05:44.196] [2023-04-12] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIERE
is it the same procedure for a 2012 mini r55 as they also use the FRMR3 module?