guide to bait pumping fresh lugworms
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- In this guide, i hope to show you Simple Tips to Help you get More Lugworms When Bait Pumping. From the basics of bait pumping to more advanced techniques, we'll cover everything in this beginner's guide to bait pumping fresh lugworms.
If you're new to bait pumping and want to get started quickly, this guide is for you. I will walk you through the process of bait pumping. By the end of this guide, you'll be pumping fresh lugworms like a pro! pump your own bait for those beach or boat fishing trips and save your self money
Hasting's beach is sandy at low tide also a lot of stones mixed in LOL and can easily destroy your pump. If you can make yourself up a little box of spares to take down the beach with you or take a spare pump if possible
This is what i use
I use a 22mm copper bait pump
also a spare pump
10mm socket for adjusting pump pressure
spare pump seals + nuts
18 Litre bucket great for washing worms afterwards
Great video an info on pumping buddy cheers for sharing ill share ya till Facebook here. Good luck an tightlines brother
thanks you means a lot cheers
@@hastingsangler keep them videos coming brother
I,ve built a pump but not had chance to use it yet your demonstration is very god. Thanks.
I hope it helps you nice to see you built your own pump good luck and thank for watching and the time to post cheers
Brilliant information thanks
Hi im glad you liked it if it helps people pump their own worms and save money im happy thank you for watching and taking the time to post
Well like you said… I had a little bit of luck … but then paid for my bait.
Will get into it more… I’m in Bexhill also and see the guys most days pumping.
Roll on summer.
Thanks for the vids. May see you on the beach one day. Keep em going
B🤓
Hi if you see me on the beach come over and say hello always nice to meet viewers thank you and good luck with the pump
@@hastingsangler Hi Dave, I will. We face the sea so will keep an eye out!
B🤓
@bbr9707 thEy are big tides starting from tomorrow so il be down all week hope to meet u
Had a go with my mate, and thanks to your knowledge we got about 150 worms really happy with that many thanks.
Hi im glad the video helped thank you for posting tight lines and good luck in the future🎣😁🐟
Awesome video, thanks for your advise, will heed the yellow mark advise. Tight lines
Hi looks like you was doing ok there are some good worms there tight lines
good video Dave word for your buddy with you keep trying doing good LOL
Hi thanks Linda the old boy did try lol that made me chuckle lol
Great video, really helpful. I've just got a Flashmer stainless steel bait pump, looking forward to free bait.
i wish you good luck with your new pump and all that free bait tight lines
Thanks mate grateful for this video
Glad it helped👍👍
you make it look so easy
i've had loads of practice les lol but still have bad days due to the weather
Good video mate
Thank you i am glad you liked the video tight lines🎣🐟
great video, ive watch your bait pumping related vids and ill be giving it ago again with my version of your copper built pumps. i bought about 30yrs ago one of those stainless alvey pumps with a 2inch bore and used it at winchelsea beach , got a few but bloody knackered after 30 mins.
Hi dave them pumps were great when they first come out but i found them 2" pumps are very short and hard work to use. As long as you get the worm and enough to go fishing Tight lines Dave
Solid and down to earth advise 👍🏻
Hi thank you for posting and taking the time to watch just trying to help others 😀🎣
Great video buddy. Full of useful information.
Hi Brian thank you for watching hope it helps some of these fishermen or women out🐟🎣🐟🎣
you make it look so easy dave
Hi Mark thanks I've had Lots of practice lol still have bad days like every one else
@@hastingsangler im new to pumping dave any tips or advice would great mate thank you
@@MarkPerry-fk1ot where do you go pumping Mark if you was local i would meet up give you some tips
@@hastingsangler im over in manchester mate
the other end of the world lol Mark just try and get the pump pressure right and don't go to deep good luck mate
Brilliant video thanks
i'm glad you liked it thank you for posting means a lot cheers🎣🎣🎣🐟🎣
Cracking video, what’s your thoughts on copper vs stainless? I’ve pumped using both started with copper then went to stainless but I feel the copper is nicer to use 🤷♂️
for me copper is the way to go suction is so much better stainless is over rated
Thanks for sharing.👍🏻
Hi thank you for posting i hope it helps any 1 trying to learn how to pump worms tight lines
Picked ya up there buddy
Thank you very much hope you enjoy tight lines🎣🎣🐟
ive done the same good luck
Brilliant,thanks 💯
Thank you for watching hope it helps tight lines
Best explanation Mt.. Cheers .. Where about was that just left of the pier ? One question; is any low tide Good or is it only the lowest of the month
Hi if your just digging enough to go fishing you can normally get enough on alot of the small tides bathing pool is a good spot in close to the beach just have to allow for a few stones
Great vid m8 what depth do you usually push the pump in what the distance to that yellow mark on your pump ?
Hi the distance from tip to yellow tape in 10 inches I hope it helped good luck
@hastingsangler cheers for the reply mate i just subscribed
@@aaronevans7197 Hi thank you very much Tight lines😁
Hi iam stu I have a pump but it's tight pulling back up at the bottom is a wing nut will it poss be to tight the nut I go blackpool for lugging thank you stu
Hi it sounds like its too tight i would get rid of the wingnut and just put a nut on the end wingnuts tend to loosen up or tighten what size pump is it
@@hastingsangler poss bit bigger than yours mine from shop second hand but working but really tight to pull up I'll try that change the wing nut
I would check to see if it has black tap washers they are horrible
Does air pressure and wind direction have effect on worm casts and depth?. If so what are preferred conditions.
Hi definitely pressure plays a big part has it gets colder I find the worms go a bit deeper and not so many cast show as for weather I find a good sw wind helps them show more now is the time it gets harder I have had day in the winter where I have not seen a cast good luck
I’ve had a pump for 12 months I’m struggling to get a worm. Would it be possible you could show me how to do it thanks, Ron
If you live in the hastings area not a problem big tides this week so would be a good time to learn
@@hastingsangler i’m in Ashford, I can meet you in Hastings? When you pump next time, Ron
are u ok week days im on holiday next week or this sunday but it will be early start or monday
Can I ask a question, do you gut blacks and blow lug as I’ve been told only blacks.
Hi Andy you can gut both but after watching your video which i enjoyed just because the worms are smaller does not mean they are blow lug keep it up andy looked good
@@hastingsangler thank you.👍🏻
👍👍👍👍👍👍👍👍
Thanks a lot
Tip for getting the die of your hands use shaving foam
Hi I have tried that works really well thanks for posting
Can you get blacks pn any size tide ??
Hi it all depends where you pump on my local beaches on the small tide we get the small worms with the occasional big 1 but most of the decent worms come on the bigger tides winter time is the hardest time for worming
@hastingsangler do you pump them commercially or just for yourself im trying to get hold of 100 fresh for 26 feb
@nicksparkes1378 hi I only now dig the big tides when the needed as I work full time do you live local to Hastings 100 worms is not a problem I average about 4/5000 a week when digging lol
@hastingsangler no i live in iceland but will be in grimsby on 26th feb for the eobc on holderness coast . Trying to find someone who can post them to grimsby but its going to be hard to get any fresh with the tides down grimsby way
Years ago when i went bait digging i might see one other person , two at the most now if i went pumping might be a dozen or more , beds where people were reguarly pumping a 1000 worms a tide now your scratching to find casts , find it pretty sad , the fella that actually invented that 22mm pump was local to me bet he wished he had patented it lol
Hi I agree digging with a spade was a skill and the worm beds were full of quality worms .the bait pump I think has killed of the worms any one can try now with some success I've been down there on really big tides and not a worm in sight just sand now if you find a good spot you have to keep it quite
@@hastingsangler yeah i know bud think im just getting old and nostalgic , much simpler world back then i rarely use lug these days , pulling in dogfish after dogfish every chuck u can chuck any old bait on lmao i still have the odd session using the old spade passed down from me dad digging razor which is one thing the masses aint cottoned on to lol
Worms and there beds are getting decimated Romney Bay getting slaughtered
i must admit the worms are not like they use to be only good thing is winter time they get a chance to recoup and the small tides will help a bit
@@hastingsanglersurely it’s just a case of farming ?, like a farmer has fields One Growing , one Fallow ( or more ? ). So the answer is divide the beach up and ban the bait digging for one year in section 1 , allow bait digging in section 2 etc , etc, etc, swap over the banned area of bait digging the following year , it is not rocket science .
@colinbrown4719 theres some good points there but with only a few real big tides a year somewhere sand beds don't get touched for years and the sand is always moving every day the beach looks different.they are on about bringing a license out for commercial diggers and for the normal fisherman a limit of 200woems per tide