Axial RR10 Bomber Budget Build - Suspension Links - Episode 2
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- Thanks to CKRCHobbies.com
Incision Stainless Bomber Link Kit: www.vanquishproducts.com/incis...
Axial 25t Servo Horn: bit.ly/1Rt92RC
Previous Balance = $28.01
Week 2 Total = $59.38
Week 2 Budget = $78.01
New Balance = $18.63
3D Printed Intake on Thingiverse: www.thingiverse.com/thing:1428891
Not Included! I CHEATED!
Tekin Pro4 HD 3000KV Motor: bit.ly/22JLpIz
Tekin RX8 Gen2 ESC: bit.ly/22JLrQG
MaxAmps.com use code HarleyDesignsInc5 - บันเทิง
Got my incision links installed super impressed 😎
I have been on the fence about buying one of these, you are making me want one more and more. Thanks for this series.
Looks great can’t wait to see the servo I need for my kit, spectrum 5c mamba max with 2850kv...good start
That intake is cool hope it helps
sweet upgrade. those links look awesome. nice looking scoop.
great job josh
Nice job on the intake, nice custom touch.
I went to metal steering links and blew my servo the same day... You are right about keeping the plastic steering links on until you are ready to shell out the cash for a new servo... Wasn't looking to spend $150 for a servo and BEC just yet.
+Emmanuel Mota yup, been there too. For those that will listen I try to give the best info I can!
my long front link is all floppy. I cant figure out if its supposed to be that way?
Sweet, I live in Auburn. I will have to come out to the fairgrounds and see the insanity. I'll be at Cisco Grove as well. Hope to meet you at an event. Cheers!
+bacongl There is a race this Sunday at Auburn, I'm sure I'll be there.
I got these for my bomber and I noticed there is a lot of slop in the pivot balls when they go into the axle mount and the skid plate. Almost as if they’re not wide enough. Is this normal?
Which traxxas rod ends are these does anyone have any part numbers?
I'm hoping my set of links will be in the mail today!
Can you explain a little bit on how the rear Anti-Squat works..??
lookiing back on the bomber rr10 build what motor and esc whould you put in the bomber now
I used the ROC412HD 3100kv and RX4 just a few months ago on my newest Bomber build.
@@HarleyDesignsInc were you still using the stock gear ratio? If not, what did you ultimately land with spur pinion?
Woulda been cool to make the intake a blower looking type
If I decide on titanium links for my Bomber, which ones would I need to order? And thanks so much for this budget build! It's great and provides a ton of help and ideas.
+mzvelo74 I don't have a kit done for everything you need on the VP side yet but I need to get that done ASAP. I'll try and get that done next week!
With the installation of the steering linkage, how's the clearance on the inside of the rim?
On stock plastic rims It's probably fine but on aftermarket rims with a bead lock ring on the inside I needed to space out rim quite far to clear the top mounted tie rod.
So if you wan't to keep you're track-width within limits you should stay with glue-on rims or make sure your rims have a internal locking system. (method style)
+wboer boer yes the stock rims clear fine. And yes as a bonus our wheels also have improved clearance also.
thanks Harley for the advice!! I would rather stick with the Axial family anyway!
Nice
what tools are you using? I am trying to do my links at the moment but can't reach the front lower link set screws
What about the slop in because the revo ball ends are smaller than the axial plastic ends? Specially in center plate, a lot of wiggle there. Shims? I didn't see you using anything.
+Denis Monteiro I don't often use shims there either. I know exactly what you're talking about though. May have an easy solution for that down the road.
+Harley Designs nice that you are aware. I worked around in the axle side tighten more the screws, and I'm thinking about use Axial ball ends in the chassis side... If possible share your easy solution plan!
I want that truck so bad lol.
Are you going to axial fest this year
+Nick Brown yes I'll be there.