Old Spray Paint Gun Restoration | Mister Patina
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- In this Video im restoring an old Spray Paint Gun, made in the GDR. Comment, Subscribe and Like if you enjoyed :-)
#restoration #toolrestoration #spraypaintgun #misterpatina
Old Spray Paint Gun Restoration | Mister Patina
In this Video im restoring an old Spray Paint Gun, made in the GDR/DDR - eastern Germany. I bought this Spray Gun online from a private guy. When i received it, the gun was very sticky and made strange noises while operating it. Time to restore this old beauty! I started with a gentle disassembly because this spray gun is mostly made of aluminum, a very soft metal. After disassembling i continued with washing all the dirty parts, to get rid of some loosen dirt and other stuff. Just washing it wasnt so effective, so i gave the parts a second bath in washing gasoline/petrol/white spirit to get rid of old paint and other stubborn dirt. Most of the parts came out really clean, some other parts needed to get deepcleaned with the wirebrush. After wirebrushing the main body part, i inspected the parts and detected some defects on the nozzle lock, a brass screw and other small parts. Time to test my new lathe mill. As iam a newby on the lathe mill, please dont be to critical with me, iam still learning. Some other parts were also put in the lathe, not for milling, but just for cleaning and sanding them with sanding paper and scotch brite. The parts and screws turned out really nice, so the most of them got polished on the benchgrinder afterwards, for a nice mirror finish and a nice even surface for good operation. The Main Body and the paint cup were just sanded and wirebrushed, because of a strange texture of the surface i didnt want to polish them. Now the parts are ready for reassembling, i didnt use any grease for it, because grease/vinyl/silicone would react badly with paint. I bought an air connector to connect the spray paint gun to my air compressor for the final test. In the test the paint gun showed, that its working perfectly fine. The Paint flow control and the air flow control doing a nice job and i sprayed some water to show you the final result.
Thanks for watching!
Timestamps:
00:00 Intro
00:04 First inspection
00:33 Disassembling
03:29 Washing the parts
04:42 Wirebrushing
04:55 Lathe milling
06:54 Polishing
07:39 Reassembling
09:38 The Final Result
09:44 Before and After
10:09 The Final Test
Old Spray Paint Gun Restoration | Mister Patina - บันเทิง
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
Congrats to 10.000 subs. The new video shows once again, why you deserve even more.
Hey Bro, thanks so much! But I think your Channel definitely deserves more Subs aswell! If you’re reading this, Check out his Channel! 😉
"as I am not my mechanics, I won't make a new one"🤣 freaking legend
Haha, maybe when I got more experience on the lathe 😄
@@misterpatina you will.
Though from look of the thread on gun I would expect a hose tail (with 'conical' end) to be fitted rather than a quick release connector but it works.
I couldn't believe he made a new one of those that time.
"As I am not mymechanics, I will not make a new one" - Perfection!
Thanks for the video!
You need a brave one, who’s talkin the truth! 😄
Thanks a lot! 🙂
This one is bar none one of my favorites. The reason is your lathe work.
Your restorations show why it's crazy for old tools to be thrown away. Once you get them, they are brought back to life. Well done! Peace 💫
Hey Sandra, thanks so much for your kind words! 🙂
WOW, how does anyone not clean their paint gun instantly after using it, makes no sense to me... But you brought it back to useable again. Nice project. Thumbs Up!
Beauty as always!
No roast, just tip, don't wear gloves or rings and especially loose clothing when using the lathe, if your hand or shirt gets caught you're going to have a bad time...
Love from Canada!
Alright, thanks for the tips! Greets from Germany 🙂✌️
@@misterpatina - Cheers brother, just don't want to see anyone get messed up. I've seen a couple nasty accidents, thankfully no deaths.
Oh, and add long hair to the list, put it up in a bun.
Pass the message if you have buddies doing the same kind of work.
Prost!
I definitely understood! Thanks for giving me this positive critic.
Hope to hear more of you!
Prost! 😄
You are right but the gloves are si thin and tight is proboply no problem
@@niggo7224 Yes, but silly error, friend - saying thin 'might be' ok. Yes, but no pain is worth the risk of nicht gloves.
Nice job, sir. I bet done of those little parts were a pain to clean. I laughed at not making a new one, and “I bought a cheap one.” 👍
Hey B, yeah it wasn’t easy partwise, but that’s the game 🙂
Im glad you enjoyed!
Very good friend. You did a great job. Congratulations.
Thanks! :-)
They are fantastic mate 👌
ne alte DDR Puste...cool, das es sowas noch gibt.
Excelente maestro!!!!
Muchas Gracias! :-)
We want to see how you use it in further restorations.
Excellent again, of course.
Thanks Verna! :-)
This is actually a great way to get a paint sprayer. They are pretty bomb proof. Worst you’ll find is a nagging air leak you can’t track down or some goober left some hardcore enamel in it and clogged up the nozzle. Older guns tend to feel nicer in the hand as they have some weight to them and are just built with higher quality parts.
I got one a year ago, took it apart to clean it and lost a packing ring and o ring where the needle goes into the handle. Took forever to find the distributor. I asked for the parts and since it was still under warranty they sent me a new gun. I even admitted it was my fault. So I have 2 identical guns and would still like to fix the one. Just can’t find the parts. But I still bought 2 new ones in a kit and a cheap small one. I’ve got 4 and I really enjoy using them on guitars. They really do a great job and I’m still learning how to use them. I’d like an old one like in the video. Did I hear air leaking when the hose was first attached? Nicely done!
What a little beauty wonderful restoration as always 👌
Thanks Jamie 🙂👌
I have been a fan for quite some time now, and I have never been disappointed. Your sense of humor is great, and by the way, great job for your first time on the lathe.
Excellent work. Hobbies are a good thing.
Thanks Wiley!
Danke, das du zeigst, das Dinge aus der DDR es wert sind erhalten zu werden...
Tolles Video, wie immer ♥️
Ich danke dir!
Handy little sprayer for large or small jobs. Nicely done, sir very nicely done indeed.
Hey Paul! Thanks for all of your kind comments! You’re a loyal subscriber! 🙂
Great job.
Thanks :-)
Very good job, sir. Well done.
Hey GP, thanks!
@@misterpatina You are welcome. Keep it up.
I will 😉
Good job, gun works well again, Regards
Thanks a lot! :-)
You had me at “brush”. 🤣🤣🤣
You’re the first one with the same humor 😄😄😄
@@misterpatina something I would do. Lmao! Great content - keep it up! 😜
Well done, I'm sure this isn’t the last time we see that gun.
Haha, on the one side i wanna use it, on the other i dont wanna :D Well see, well see...
You killed the "Made in GDR"!!!
Il consueto spettacolo di lavoro un straordinario. Bene così!
Ciao, grazie per le belle parole :-)
...good one, i think the older guns were better made, not as much plastic and easier to maintain. nice work, stay safe and enjoy..
Hey Bob, yeah I think the Same! You too bro!
Very cool and nice work as usual.
Thanks Stefan!
Very nice!
Thanks Susannah!
Hey Nice restoration! Perfect finish!
Hey Bro, thanks!
Great as ever! 👍
Thanks Alessandro!
Impeccable Work.
Thanks a lot!
Toller Kanal, super Projekte. Mach so weiter 👍
Hey dank Dir! Ich bleib dran! 🙂
I love the lathe work!
Thanks Lee!
Very nice, well done and works perfectly!
Thanks Bro!
Very nice, some areas you clean like the hang loop, or try to polish the paint container.
GOOD JOB
Thanks Bro!
You should remove the needle first before you unscrew the tip. Nice restoration. 🎨
Thanks for the hint Jeff!
Top job matey!!
Thanks mate!
Love it.
Thanks!
You did an awesome job as usual man. Keep it up!
Hey Bro, thanks!
3:10 lol! Mister Strongman.
Haha, I just forgot to put on some magnesium powder :D
Mr Patina I like your work style 🙏🏻🌹
Radha, thank you so much!
Nice job bro, looks awesome
Hey, thanks!
@@misterpatina your welcome I enjoy the vids bro, where from?
Thanks! Iam from Frankfurt/Germany!
Really you working prefect bro ❤️❤️😻
Thanks Haydar! ❤️
Nice job
Thanks Bill!
Super👍👏👏👏👏👏👏👏👏❤
Nice job!
Thanks a lot Jaime! 🙂
Was mich hier begeistert, was wurde mit dieser Pistole alles Lackiert, wie viel Liter Farbe ist da durch gegangen, ach das ist einfach herrlich hier zu zugucken... ist wie NEU das gute Stück ...was sonst, wenn Mister Patina dran war .. !!
Hey, dank dir vielmals! Ja, bei jedem Projekt habe ich solche Gedanken. Die meisten sind sicherlich sehr viel älter als ich 😐
Superb job, as usual. It's so nice to see a craftsman at work.
Hey John, iam glad you like my work :-)
This is a nice video, your camera angles and audio make it really peaceful and nice to watch!
Nicely done.. Looks like the spray gun was 'dancing' towards the end.
Great vid to watch before going to sleep.
Fan, Down Under.
Thanks mate.
Hey B! Thanks for your comment mate!
If you use water inside de paint gun, it can take it rusted (i think)😅 Anyway nice restoration :)
Cảm ơn c ạ,hqua vừa nhận được thông báo là tập luôn bayh e đã đánh được r ạ,cảm ơn c nhiềuuuu❤️❤️
금손 만능손입니다 정보 잘봣습니다혹시 손타카 수동타가 복원 고장 수리 하는 영상 부탁드립니다
Top als altijd!
Hallo Antje, heel erg bedankt :-)
Molto bene congratulazioni
Grazie mille :-)
Restauracion excelente de esta pistola de pintura en aerosol, saludos desde Venezuela.
Hola, gracias por las lindas palabras! ¡Saludos desde Alemania!
@@misterpatina 👍👍
Buen mantenimiento
Amazing you are at 10k already!!!👍🏻👍🏻👍🏻👍🏻
Yes sir! 🙂
Made in GDR 👍🏻👍🏻💪💪 aus dem goldenen Osten 🤪😁💪
Da kommen die schönsten Werkzeuge her! I love it! 🙂
This was awesome! Good job
Man, pls use the counter point holder on the lathe when u are turning something like this cup. If this thing leaves the chuck the damage can get really serious really fast. Just worried about ur safety, don't get me wrong. Awesome job.
Hey man, thanks for that! I’ve gotta mention that I didn’t have a holder at this time, but I was very careful! Now I have one 🙂
Very nice, man! It's weird because I've been wondering a few things lately:
First: Who graffitied the side of my house?
Second: Why would someone bring an air compressor (and leave it behind seemingly on accident) and graffiti my house with a proper spray gun when they could have just used a can of spray paint?
Third: Who in their right mind puts a 1/1 scale sticker of Nicolas Cage's head on their absolutely vile lime green colored air compressor?
After seeing this I'm pretty sure I have the answer to all those questions. You can have your air compressor back once I'm done repainting it.
Oh, also a huge congratulations to hitting that 10,000 subscriber mile marker! Or I guess it would technically be more fitting if I said kilometer marker. Well now that I've completely confused myself I'll take my leave.
Thanks! In my opinion it’s not weird anymore cause with your comment you gave me the answer to all my questions: you, sir, are completely crazy 😄😄😄
Thanks for everything Bro, I really appreciate!!
@@misterpatina Haha, you bet! Crazy's the name, commenting's the game 😆
🤣👍 bist du auch ein Nostalgiger aus der DDR? Ich hab auch noch ein RG28s von früher und möchte es nicht mehr missen. Schöne Arbeit, mach weiter so. ✌
Ich bin zwar nicht aus der DDR - dafür wäre ich wahrscheinlich auch zu jung - aber ich liebe alle möglichen Maschinen/Geräte/Autos/Moppeds aus der DDR! Und so ein altes Rührgerät wäre sicherlich auch interessant für meinen Channel 🙂
Tausend Dank, ich bleib dran! ✌️
Made in GDR reminds me of the joke:
"I have a dog, he's an East German Shepherd."
🥲
Nicetiful
Thanksiful!
Bom trabalho! 👏👏
Muito obrigado :-)
excellent job
Thanks man! 🙂
@@misterpatina your wellcome it looks incredible
love this ❤️❤️
Thanks! 🙂
Good video
Thanks! 🙂
Hi Mr. Patina, love your work by the way! I just got into watching restoration videos and have a question. How do you remember the order in how to put it together? I have bad memory and would love to know what you do to keep your process so organized.
Haha, good question. I have a bad memory aswell, and I can tell you the secret: Iam filming it. When I don’t know how to put it together, I just watch the footage 😄
And beside the final movie, it’s not always so organized as it seems 😉
Thanks for watching Bro!
nice
Thanks!
10/10
👍 Carsten
👍
Gute Arbeit 👏 Was hast du für eine tolle Drehbank! Ist die noch aus der DDR ?
Danke 🙂
Vom Alter her kommt sie aus ddr Zeiten, ist allerdings, tatsächlich, Made in China. Jedoch hat die Drehbank wirklich eine gute, massive Qualität und Bauweise. Nicht zu vergleichen mit dem heutigen China Kram.
👍👍👍👍👍❤
🙂✌️❤️
👍👍👍👍👍👍
🙂👌
Made in GDR - like me 😄
Haha!
The poor brass nut didn't need to be flattened, just sanded
Geiler shit,Bro
😄😄😄 danke! ❤️
On the sprayer it said “Made in GDP”. Where is that? I looked online and it only give the acronym Gross Domestic Product. Thanks. Great job by the way.
It’s 'GDR', German Democratic Republic 🙂
Konsequenterweise hätte auch "Made in GDR" wiederhergestellt werden müssen!
Is the step with the degreaser required? Looks like the gasoline did a pretty good job at degreasing and cleaning.
In this particular case i think it wasn’t necessary. I just didn’t know that the gasoline has this much power 😄
Oil based paint was used in gun thats why gas worked so well if it would have been a water based gun then it would have need a water based cleaner
I would never roast anyone using a lathe, i don't even know how to use it. 😅😅
Cruz ✝️ let us paint 🎨 the world 🗺
Mit Handschuhe an der Drehmaschine? UVV sagt nein...🤣🤣🤣
Think it‘s from the former GDR because of the TGL - logo ("Technischen Normen, Gütevorschriften").
Yes, its from the GDR :-) Thanks for the information with the "TGL", didnt know that before.
@@misterpatina die Pistole kommt vom Kabelwerk Oberspree (KWO) Berlin. TGL heißt Technische Güte und Lieferbedingungen und war die Entsprechung zur Deutschen Industrienorm (DIN)
Ist wirklich wieder schön geworden.
Hey A to Z, tausend Dank für diese perfekte Erklärung! Finde ich richtig interessant! Danke!
It literally says "Made in GDR" on the handle...
Nice refurbishing. I can't see why anyone would allow a paint gun to get into that condition to start with. I have a set of name brand paint guns that I have used a lot over the past ten years or more and they look spotless and like new to this day. Not even a fingerprint on them when I put them away. I clean the paint gun instantly after finish spraying anything. Easier to clean while the item you painted is drying/curing then to let it go until later...that never happens. Thumbs Up!
O amassado que ficou no reservatório vc não tentou consertar?
👍😉
NEXT 100000
Hey Bro, thanks a lot!
I've noticed you use a drill press adapter stand- I have wanted to get one to save on buying a drill press; have you had a good experience using yours? And what type do you have?
Hey Brian, thanks! Its from my grandpa. I took a look but couldnt find any brand or company :-(
...ну, после сборки необходимо было отрегулировать распылитель!!!
Any chance you would want to sell that spraygun??
Nope, it’s already in my display 😄 but I got 2 more (mostly similar) , unrestored, sprayguns if you want.
Does that say made in GDR?
Yup, it’s a GDR product.
Don't use teflon tape on pipethreads
Embrace the MEMES
That thing needs a dip in the lacqer thinner...