ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Hears a few little mods ive done to my bike to improve handling and lower end power
(Derestricted)
======================================
Exhaust (can)
amzn.eu/d/j08u75B
The pipe part was a stock one off eBay that I cut end off
============================]
chain (only for Euro 5 as its slightly longer)
www.ebay.co.uk...
===================================================
sprocket
www.ebay.co.uk... FOR WATER COOLED VERSION ONLY
========================================
sat-nav mod
Its made from one of these www.ebay.co.uk... if you search around you can get one very cheep
=============================================
tyers
www.ebay.co.uk...
Nice review. Ive heard all good things about about it.
Interesting what you say about the tyres.
Exhaust sound good better than the belching .
haha 😀indeed
My 2019 terrain has been hammered with rust..check the underside of the tank...mine didnt even have undercoat, nevermind paint, and was rusty. Aye man, av had to change almost all the bolts on the bike, repaint most of the metal parts down low. Last chinese bike for me, though i will keep this one coz a love it😁 For its first MOT, i needed a new rear shock, headbearings, front wheel bearings were replaced after 2k miles. Once all shit parts are swapped out, it may be a decent bike
I can certainly believe it .. At end of day it's built to a budget and you get what you pay for. That being said they are getting much better compared to japanese bikes .. the early Chinese bikes you'd be lucky to get it round corner before something Snapped lol..main issues was normally, chain, sprockets, bearings, cheep bolts and fasteners so they rust fast and poor electronics ..
You do realise that Sinnis are a British Company ?? They use Chinese sourced parts yes but the bikes are built in England .
@@PhilipKerry they're designed and built in China. Sinnis just writes their name on the side.
@@CuriousGoose The parts come from China but are assembled in France .
Nice video, to the point and informative ,, can I ask what chain n sprocket and tyres you fitted thinking of doing to mine
its in show-notes
@@oldfartuk ta
Do you have any pictures of what you removed from the airfilter
Hi, great video. How much do the revs drop with having an extra tooth on the front?
by about 1500
Where did you get your sprocket from, I’ve got a gpx but can’t find one
www.ebay.co.uk/itm/225594131035 FOR WATER COOLED VERSION ONLY
I'm currently looking to trade in my sinnis hoodlum for this bike.
They very good bike for the money ..only issue (for now) is getting spare parts nobody does them apart from sinnis
I swap my stock air filter with K&N Air Filterr, it run much better.
What KN part no¿ I couldn't find one for Sinnis anywhere.
@@exmoorbeastie K&N Filters YA-1906 will fit the 2017-2020 and 2021-onwards Terrian model. You can also remove the metal mesh underneath the air filter as well. Also a lot of sinnis owners use the K&N YA-1906 as it fits. And sinnis doesn't support or have an option for mods for the 2021-onwards Terrian T125 as they are Euro 5 standards with little or no ECU or any modifications. You can't put the toro exhaust system designed for E4 Terrian 2017-2020 onto E5 Terrian T125 2021-onwards as it will jump straight into limp mode.
@@Welshman_WWG Thanks very much for this. Greatly appreciated.
I have a Motron x nord witch is the exact same one, but how do you derestrict the fuel injection? Because for air and flow is fun but without more gas thers no pew pew power😂
its a leaning ECU so it will adept to changes (most bikes this is not the case, but the sinnis is)
i take the mesh out of mine and it doesn’t want to start, do the cats need to be taken out for the bike to run?
no, mine ran fine regardless .. you could try restting the ECU turn egition on and off 5 times then leave off for a few minutes
Do you have the details for the exhaust and end can from e bay item numbers cheers
amzn.eu/d/j08u75B
The pipe part was a stock one off eBay that I cut end off
I have just failed badly to fit a front sprocket to my euro 5 it has a 13T on it. I measured the spline shaft and it is 20mm but the one I ordered from Amazon was a 428 20mm 15T the splines are different though so I'm stuck!
That's Amazon for ya .. I got mine off eBay www.ebay.co.uk/itm/363690086456?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=BAG5QEulTBe&sssrc=2349624&ssuid=RMAxof2nSey&var=&widget_ver=artemis&media=COPY
Thanks for the reply so I will be going up 3 teeth is that going to be a big/ to much of a difference would you think?
This is slightly worrying now! This sprocket doesn't fit. This is the 4th Suze and type I have tried without success... I emailed Sinnis parts and they wasn't helpful at all.
@@ianc6472 I've had same problem. Seems Sinnis must have changed the splines on the main drive shaft at some point! Very frustrating. Especially as Sinnis are no help!
i aint done any mods to mine and mine tops out a 71
obvouly depends how much you waight too .. im like 13st lol
@@oldfartuk i m about 13 and a half 14 stone pal im not the skinnest lad lol
could you make another satnav bracket for me? looks great.
Its made from one of these www.ebay.co.uk/itm/165327825561?9a30f56 if you search around you can get one very cheep
How much did taking the air filter and stuff help speed wise
Also,what teeth back sprocket do you have? And where did you get the chain from
@@johnquinn1496 quite a bit ..about 10mph.more ..it's more noticeable in acceleration 0-50 ..and better going up hills
Chain hear www.ebay.co.uk/itm/133004275758?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=DXpb8RH5Rz2&sssrc=2349624&ssuid=RMAxof2nSey&var=&widget_ver=artemis&media=COPY
This only fits the water cooled version as it's slightly longer
@@oldfartuk cheers. I think i found a chain thatll fit mine anyways
@@oldfartuk what back sprocket do you have fitted? I live in wales so its a more hilly enviroment. Do you have any recomendations?
Buuuurrppp!!! 😂
Ave you taken tge cats out of exhust
not in the downpipe as that would be quite difficult, However the "spare" terrain exhaust that i got off eBay i did drill out the cat in that part