A gain control is not a volume control. When using them it may seem like they do the same thing, but they're very different. Gain controls are always on the input of a component and volume controls are always on the output. The main thing you need to know is only a gain control can distort or overdrive the signal. Volume controls don't alter the signal in any way. They just attenuate.
@6:40 there are only 7 built in presets all in the white bank the other 14 slots in the yellow and purple banks are left blank for you to program in your own custom presets, and of course you can also overwrite the 7 presets in the first (white) bank if you want to , i know because it kinda freaked me out at first because all the reviews said there are 21 preset slots , but neglected to tell you that 14 of those are deliberately left blank , i had to actually read the user manual (something i almost never resort to haha) to find out this is how its supposed to be
The lack of a software editor is a big plus for me. I don’t like having to plug things into a computer to access features. I like the feeling that I have a complete unit in front of me. I totally get why a lot of people feel differently though. The cleans distorting does seem like an odd problem though. I know the IRs can be turned off, so you’d be able to run it into something like the boss IR or into your DAW and use the IRs there.
Those dual-function pots always drive me mad. The one good thing about a potentiometer is that you know what the setting is just by looking at it. But when it just writes a value into memory while you turn the dial, the actual setting becomes much harder to gauge (once you have done an adujstment of the alt setting). Therefore in a multi-mode layout like this is, I much prefer a small display+an infintiely turning encoder wheel.
Hmm, I haven't had any trouble with the clean tones with mine, and my guitar has SD Black Winters in it. After adjusting the gain and amp volume, did you try adjusting the master volume on the side of the unit?
I actually like the lack of software and simple UX. I love having the physical thing rather than sitting infront of my keyboard and clicking endlessly. True plug and play.
There's another volume control called something like preset volume. You hold the tap and alt button then dial the delay knob to adjust it. You can do the same with the reverb knob to adjust amp presence.
It’s the amp encoder knob in the middle that you turn while holding alt and tap to change preset volume. There are a whole bunch of alternative settings like presence and noise gates that you can control this way with the other knobs
The problem in the video is there's too much gain somewhere in the signal path. A volume control can't alter the signal, so whatever the fix it, you'll need to alter gain to do it.
I think the reason you weren't getting a clean tone is because you had the overdrive on. The DIST knob has to be turned all the way off to disengage the overdrives completely. And once you were on the "SPECIAL" amp setting, which is more of a "Dumble" style amp, which are almost always used for "edge of breakup sounds." Stick to the CLEAN amp with DIST all the way off, and I think you will get a decent clean tone. BTW, I have a POD Express and love it. I've recorded the guitars for my last 6 or 7 videos using it exclusively.
Sounds really good. These young kids need to go back and find a Pod Bean, Johnson J Station, or a Zoom 505 to really appreciate what is available these days.
Some other guy commented here that there is a way to increase volume without the gain. He increased the gain. That's why it's distorted. On a regular amp you would just increase the output volume, not the gain. There are other combinations there with the buttons and the toggles for this.
The idea of this unit is to Plug and Play and most important to use your ears! many time we so much base our desicions on what we see on a screen, and thats a big mistake
Plug and play, minimal tweaking, good tone and at a GREAT price @ $179. 👌 What's not to like? There's a reason these things have sold out already and retailers are waiting to restock. They are incredible bang for the buck little units. I've ordered one and am waiting on mine to arrive. 🤠👍 I'll pair this with a TC Electronic Nova System and dual footswitch that I can mount onto a mini pedalboard. Throw the pedalboard in a backpack and go jam anywhere. My Kemper Rack & Profiler Remote will go outside when it's time for heavy lifting 😏 (pun intended)
You can change cab models as well by holding Alt + TAP +turning the amp model knob. I would go back and try adjusting the Master Volume (Alt + TAP + Delay knob) to get a better output without clipping. Theres even adjustments for the noisegate threshold and decay, and presence, all by using different buttons. Once you get the hang of it its super easy to dial in and allows you to get much better tones fairly quickly.
Du har mastervolymen för lågt.Håll alt knappen tillsammans med dem nedre högra för at justera den med delay knappen. Du justerar även precents med samma metod fast med reverb knappen. Byt högtalaren till bogner caben som ligger kl12 då händer d grejer 😉
For the pricepoint and mobility, also, it’s super light and runs on AAA.. it’s a great practice/bedroom platform. You can add an ext foot switch to control del/mod/verb. It’s pretty flexible for its stock amps&effects
I had the Boss Ir-2 too, but I like the metal sounds of the Line 6 better and it is better suited as an all-in-one solution with a foot switch. I play it for practicing on an Everse 8 speaker and for mini rehearsals
Here's my question. You've selected an amp. You've adjusted the bass, treble gain and mid settings to your liking. You then change the amp. Do those bass, treble gain and mid settings you made carry over to the "new" amp you've selected or do you have to go through bass, treble gain and mid settings all over again for that amp?
i hate that there hasnt been a new format for effects. the first ones had the footswitch and 1-2 knobs you set and forget. now we have these super complex ground pedals be it a helix, quad cortex or even this pod noone could possibly operate with their feet alone. this line 6 even has a shift button you need 2 hands for. having to hunch over constanly when experimenting kills my back. but the alternative would be having a music stand on stage but that doesnt look right.
Ola, it's the same on the bass express with the cleans and active bass still distortion with non active bass. There is a switch on the inside that changes something couldn't find info on switch...
most times i dont read manuals with the pod express i HIGHLY recommend reading the manual which can be found free online by just doing a google search for Pod Express User Manual , on Page 19 you'll see *Editing Amp Paramaters* To access any of the above amp parameters, hold the ALT button while turning its respective Effects knob or AMP encoder. As you adjust the knob, you'll see the LED ring segments light up bright red in clockwise fashion, with no LED segments lit to indicate the minimum value and up to all seven segments lit brightly to indicate the maximum value for the parameter. For example, holding ALT while adjusting the GAIN (DIST) knob to approximately 50% results in about half of the LED ring segments lighting, clockwise from minimum, as shown in the following illustration.
Great playing! I got the POD Express after owning several Helix products. I actually like the lack of editing it's just plug and play. I bought it for the crunch channel really and it's solid straight into the DAW. For $179 it's worth it.
Kinda hard to demo something new and slightly more complex than your average pedal if you don't learn how to operate it. Read the manual next time. This just feels half-assed. Very disappointing video and I don't even like Line 6.
The problem of not having clean tones is because you don’t read the manual. There’s a command that allows to set the initial gain of the amp. If you set that too loud, it doesn’t matter how clean the amp is.
@@OlaEnglund He still had output with the preamp all the way down, you didn't (as I remember) so might be a setting!? (don't think its because of pickups, thats too weird I think,,,
This would probably work well enough for me because I coil split my Duncan Distortion for cleans on my strat using a number 2 position tone. I never expect humbuckers to clean up as much as single coils.
I have the same problem with my pod go, everytime i plug a guitar with humbuckers its hard to get a clean tone The solution was to activate the pad function to reduce the input gain, I don't know if there is this option in the pod express
I like this pedal as I am not a fan of having to hook my pedals or amps up to my computer to dial things in I am old school turn the knobs on the pedal or amp guy lol!
It's a fickle thing. I found that I get the best results using the headphone output with a 3.5mm TRS to 1/4" TS mono into my interface. The stereo 1/4" outs were giving me issues. It's fun for practice or for sketching songs I guess but Line 6 could have done better. They rushed it out to compete with the IR-2. That's the whole reason I got mine just because it was available when BOSS's IR-2 still has a wait time. I just wanted something to get a few usable tones with while I program drums so I can conserve memory.
Seems like they really leaned into their spider amp functionality for the knobs with this. Sorta smart. Sorta unfortunate. They really did put a lot in this thing. But who asked for this pedal? I think it’s time they graduate from the HX line and move forward. You know since I’m an expert business person and totally know what I’m talking about *looks around and hopes no one is paying attention.
I have a similar problem using the UA Max pedal with Fishman Fluance pickups and the cleans being distorted, but switch to a guitar with passive pickups it’s ok.
The way the clean works is similar to the way a Fender Deluxe works.. If you up the gain you get more volume without much more (if any more) break up...
This is actually a good, honest review (all of Ola’s are 👍), because it points-up a couple of deficiencies: To me, that’s a serious problem not to be able to start from Clean and then dial in as much dirt as you want / need (it’s like having an assault rifle with no single-shot selection possible), and the control-arrangement seems quite cumbersome, versus most other multi-effects units I’ve seen. That being said, it gets some really nice tones (especially the chorus / flanger stuff), but you just have to remember that you’re locked-into at least *some* dirt. I guess for some people that’s OK, depending on your style. A pleasant surprise was the “early”, basic distortion - that sounds like what people were getting into back in the ‘50s with relatively low-powered, small amps - would be good for rock-a-billy 😎👍🤠🎸!
Hey Ola always enjoy your channel question I record my own music and want a small multi effects pedal that has everything from nice clean with delays to an awesome in your face chug monster distortions. Any suggestions? Thx Ola 🤘🏻🎸
If you have time maybe upload another video, after using the recommendations from commenters here regarding how to increase volume without using the gain knob. Curious to know what you will think of it then. I'm considering ordering one but this video got me a bit worried.
I have a similar issue with my Catalyst 100 (it likely uses the exact same technology as this pedal as they have nearly identical features) - I cannot for the life of me get a good clean tone with humbuckers. I have this beautiful 05 Epi Dot that I have to crank my volume way down to not distort
Would have been cooler if it had some line 6 modelled real amps instead of their own sounds, also the fact that you can't download your own impulse responses makes me lean more towards getting the ir-2 since i've been considering getting a smaller modeller pedal.
Having to hold the ALT button to adjust the tone knobs is such a bad design choice. You can't even chug 0000 while tweaking unless you contort your hand to spin the knob at the same time.
good video dude! 🎉 I have a question, do I have to connect a DI to play it live? ( To get a better sound) Or can I just connect directly to the mixer and, it will sound good?
You can get clean sound you just have to turn the drive down on the amp model and the drive pedal effect. Pretty simple . But it's good to see Ola Is R worded.
Is it good enough for metal? I can't get a clean sound going for some reason ¯\_(ツ)_/¯
be eco friendly and buy a plugin? no?
The bass one as well. IMO.
This could have been a great practice tool. But it’s missing a few key things
And what ewaste behemoth's device are yoy typing this comment on?@@CrunchyTones-s2o
read manual. There is some things in it about how make get propper setting of it, bc some of them (like pressence) are kinda hidden
Line 6 has led to great albums including deftone albums not really sure if clean tones is their special but pure sonic bliss 😜🤘
Ola the unit has 4 volume controls.
ALT+DIST = Channel Gain
ALT+AMP = Preset Volume
ALT+TAP+Delay = Poweramp Volume
Side Volume = Output Volume.
A gain control is not a volume control. When using them it may seem like they do the same thing, but they're very different. Gain controls are always on the input of a component and volume controls are always on the output. The main thing you need to know is only a gain control can distort or overdrive the signal. Volume controls don't alter the signal in any way. They just attenuate.
The red finish with gold hardware is beautiful
And that subtle black inlay at the 12th fret 🤘
Absolutely GORGEOUS guitar!
🤘🏻😈🤘🏻
@6:40 there are only 7 built in presets all in the white bank the other 14 slots in the yellow and purple banks are left blank for you to program in your own custom presets, and of course you can also overwrite the 7 presets in the first (white) bank if you want to , i know because it kinda freaked me out at first because all the reviews said there are 21 preset slots , but neglected to tell you that 14 of those are deliberately left blank , i had to actually read the user manual (something i almost never resort to haha) to find out this is how its supposed to be
The lack of a software editor is a big plus for me. I don’t like having to plug things into a computer to access features. I like the feeling that I have a complete unit in front of me. I totally get why a lot of people feel differently though.
The cleans distorting does seem like an odd problem though. I know the IRs can be turned off, so you’d be able to run it into something like the boss IR or into your DAW and use the IRs there.
Those dual-function pots always drive me mad. The one good thing about a potentiometer is that you know what the setting is just by looking at it. But when it just writes a value into memory while you turn the dial, the actual setting becomes much harder to gauge (once you have done an adujstment of the alt setting). Therefore in a multi-mode layout like this is, I much prefer a small display+an infintiely turning encoder wheel.
yes still trying to do this in 2024 is absurd
its good but not 200£ good
Hmm, I haven't had any trouble with the clean tones with mine, and my guitar has SD Black Winters in it. After adjusting the gain and amp volume, did you try adjusting the master volume on the side of the unit?
Maybe his signal was clipping due to to much volume and not enough headroom or he finally had a bad cable.
I'm playing through mine with Seymour Duncan Pegasus/Sentient and don't seem to be having the same issue.
I actually like the lack of software and simple UX. I love having the physical thing rather than sitting infront of my keyboard and clicking endlessly. True plug and play.
kinda a toy store type of effect...or something you might find on temu for 5 dollars
@@jacksybicki7330 Yeah i don't love the design of it, but it's passable.,
Thanks Ola, but I'll pass on this one.
There's another volume control called something like preset volume. You hold the tap and alt button then dial the delay knob to adjust it. You can do the same with the reverb knob to adjust amp presence.
It’s the amp encoder knob in the middle that you turn while holding alt and tap to change preset volume.
There are a whole bunch of alternative settings like presence and noise gates that you can control this way with the other knobs
@@leestanford2452 Page 19 of the manual says it's the delay knob plus alt and tap.
The problem in the video is there's too much gain somewhere in the signal path. A volume control can't alter the signal, so whatever the fix it, you'll need to alter gain to do it.
I LOVE the fact there's no editor!!! ALl right there. The Line 6 IR's have also come a long way.
I think the reason you weren't getting a clean tone is because you had the overdrive on. The DIST knob has to be turned all the way off to disengage the overdrives completely. And once you were on the "SPECIAL" amp setting, which is more of a "Dumble" style amp, which are almost always used for "edge of breakup sounds." Stick to the CLEAN amp with DIST all the way off, and I think you will get a decent clean tone. BTW, I have a POD Express and love it. I've recorded the guitars for my last 6 or 7 videos using it exclusively.
Sounds really good. These young kids need to go back and find a Pod Bean, Johnson J Station, or a Zoom 505 to really appreciate what is available these days.
actually the fact that you tried different guitars was really helpfull, i own only high output pickups guitars and that makes me think twice
yeah he proved it has a place in a dumpster
Some other guy commented here that there is a way to increase volume without the gain.
He increased the gain. That's why it's distorted.
On a regular amp you would just increase the output volume, not the gain.
There are other combinations there with the buttons and the toggles for this.
@@osomusic That's true. A volume control can't alter the signal, only gain can.
The idea of this unit is to Plug and Play and most important to use your ears! many time we so much base our desicions on what we see on a screen, and thats a big mistake
Sounds like something Glen from Spectre Sound Studio would say.
Real
@@Maykholiv That’s a good thing.
@@RichardGarcia93Not really
Plug and play, minimal tweaking, good tone and at a GREAT price @ $179. 👌
What's not to like?
There's a reason these things have sold out already and retailers are waiting to restock. They are incredible bang for the buck little units.
I've ordered one and am waiting on mine to arrive. 🤠👍
I'll pair this with a TC Electronic Nova System and dual footswitch that I can mount onto a mini pedalboard. Throw the pedalboard in a backpack and go jam anywhere.
My Kemper Rack & Profiler Remote will go outside when it's time for heavy lifting 😏 (pun intended)
$180? Nah I'll stick with my old kidney bean.
You can change cab models as well by holding Alt + TAP +turning the amp model knob. I would go back and try adjusting the Master Volume (Alt + TAP + Delay knob) to get a better output without clipping. Theres even adjustments for the noisegate threshold and decay, and presence, all by using different buttons. Once you get the hang of it its super easy to dial in and allows you to get much better tones fairly quickly.
Love mine. Sounds great, lots of options.
Du har mastervolymen för lågt.Håll alt knappen tillsammans med dem nedre högra för at justera den med delay knappen. Du justerar även precents med samma metod fast med reverb knappen. Byt högtalaren till bogner caben som ligger kl12 då händer d grejer 😉
For the pricepoint and mobility, also, it’s super light and runs on AAA.. it’s a great practice/bedroom platform. You can add an ext foot switch to control del/mod/verb. It’s pretty flexible for its stock amps&effects
It sounded dope as first and then the more he turned that knob the shitier it got
It sounds like this old behringer V-amp stuff. Sorry
I had the Boss Ir-2 too, but I like the metal sounds of the Line 6 better and it is better suited as an all-in-one solution with a foot switch. I play it for practicing on an Everse 8 speaker and for mini rehearsals
Cheers for checkin this out Ola and all your work, your a legend mate
quite sure he kept his cool and didnt stop it from falling into a trash can
Fluff shout out!🤘
Glad I didn't buy this thing. Sounds like ass for the hi gain folks.
Try using the channel volume, you can get a clean tone
Well this sucked
That clean time issue is a huge one... What in the world
Coffee with Jesper S.
This kind of product make me stick with single pedals. Its too complicated to tweak.
Here's my question. You've selected an amp. You've adjusted the bass, treble gain and mid settings to your liking. You then change the amp. Do those bass, treble gain and mid settings you made carry over to the "new" amp you've selected or do you have to go through bass, treble gain and mid settings all over again for that amp?
I hope the cabs on the Express are using the updated 3.50 cab update for helix!
0:08 that became my new ringtone
People still use custom ringtones?
@@thisguy2973- Yeah. Mine is Greenhill Zone from Sonic the Hedgehog.
i hate that there hasnt been a new format for effects. the first ones had the footswitch and 1-2 knobs you set and forget. now we have these super complex ground pedals be it a helix, quad cortex or even this pod noone could possibly operate with their feet alone. this line 6 even has a shift button you need 2 hands for. having to hunch over constanly when experimenting kills my back.
but the alternative would be having a music stand on stage but that doesnt look right.
S by Solar desperately needs a five-string bass and at least a couple more finish options. Yellow please!
I didn't get a really clean sound with the Fishmans either
Well he tried passives too and it did the same thing
Will you test ampworx Tc Electronic hi-gain series?
Sounds pretty damned good from the opening tbh
For £200 it's not a bad unit.
Mooer 150 - 125,00 GBP
Ola, it's the same on the bass express with the cleans and active bass still distortion with non active bass. There is a switch on the inside that changes something couldn't find info on switch...
most times i dont read manuals with the pod express i HIGHLY recommend reading the manual which can be found free online by just doing a google search for Pod Express User Manual , on Page 19 you'll see *Editing Amp Paramaters*
To access any of the above amp parameters, hold the ALT
button while turning its respective Effects knob or AMP
encoder.
As you adjust the knob, you'll see the LED ring segments light up bright
red in clockwise fashion, with no LED segments lit to indicate the minimum
value and up to all seven segments lit brightly to indicate the maximum
value for the parameter.
For example, holding ALT while adjusting the GAIN (DIST) knob to
approximately 50% results in about half of the LED ring segments lighting,
clockwise from minimum, as shown in the following illustration.
Great playing! I got the POD Express after owning several Helix products. I actually like the lack of editing it's just plug and play. I bought it for the crunch channel really and it's solid straight into the DAW. For $179 it's worth it.
The crunch channel (Friedman based) sounds awesome for sure!
Yeah I'd say the same thing if I paid for it too. Thank God I didn't pay for it.
Tight like a tiger
Smoke and a pancake?
Pipe and a crepe? No? Bong and a blintz?
Flapjack and a cigarette? 😂
I can see there is no pleasing you! 😂
Kinda hard to demo something new and slightly more complex than your average pedal if you don't learn how to operate it. Read the manual next time. This just feels half-assed. Very disappointing video and I don't even like Line 6.
The problem of not having clean tones is because you don’t read the manual. There’s a command that allows to set the initial gain of the amp. If you set that too loud, it doesn’t matter how clean the amp is.
Just saw Andertons video - Danish Pete plays it clean - without the preamp turned up at all!
BUT he was using a single coil pickup guitar. As I mentioned would work in this video.
@@OlaEnglund He still had output with the preamp all the way down, you didn't (as I remember) so might be a setting!? (don't think its because of pickups, thats too weird I think,,,
Man…..that thing sucks.
Ola. Tune that beast. All of those beasties... Like three in a row.
Question... what tuning do you use for your guitars and do you keep the same one for each Ola Tests video?
Moderation? 😂
⭐⭐⭐show olá englund⭐⭐⭐🇧🇷
Sure looks and sounds like a pod to me
Not inviting to me... just like I couldn't ever make the kidney pod attractive sounding to my ears. That thing is ... blech...
This would probably work well enough for me because I coil split my Duncan Distortion for cleans on my strat using a number 2 position tone. I never expect humbuckers to clean up as much as single coils.
This Song Found me meaning is Haunting WHERES KINGER.?
Awesome you can play with headphones for late nights, Sounds nice just not to happy with the fuzz other then Fuzz nice…
you should replicate bolt thrower tone
I'm worried how Ola is speaking so loudly, are your ears ok? :P
You probably had some boost/od on on the preset without realising, since the knob is used for multiple things
It sounds okay but not for a €220 product from Line6. I mean you can get a katana for almost the same price.
Your tone is so vocal TH-cam closed captions transcribed :40 as 'Oh Oh'.
Ola Failed to show that you can change CABS in every Amp mode 😅
Ola does the best demos. Quickly twists knobs. This is too complicated for me.
I have the same problem with my pod go, everytime i plug a guitar with humbuckers its hard to get a clean tone
The solution was to activate the pad function to reduce the input gain, I don't know if there is this option in the pod express
I like this pedal as I am not a fan of having to hook my pedals or amps up to my computer to dial things in I am old school turn the knobs on the pedal or amp guy lol!
You hear that Positive Grid...a modeler with bluetooth capabilities
It's a fickle thing. I found that I get the best results using the headphone output with a 3.5mm TRS to 1/4" TS mono into my interface. The stereo 1/4" outs were giving me issues. It's fun for practice or for sketching songs I guess but Line 6 could have done better. They rushed it out to compete with the IR-2. That's the whole reason I got mine just because it was available when BOSS's IR-2 still has a wait time. I just wanted something to get a few usable tones with while I program drums so I can conserve memory.
That guitar is stunning.
Let's get a solar with gold plated strings 😂 that would be super sick !!
Seems like they really leaned into their spider amp functionality for the knobs with this. Sorta smart. Sorta unfortunate. They really did put a lot in this thing. But who asked for this pedal? I think it’s time they graduate from the HX line and move forward. You know since I’m an expert business person and totally know what I’m talking about *looks around and hopes no one is paying attention.
I have a similar problem using the UA Max pedal with Fishman Fluance pickups and the cleans being distorted, but switch to a guitar with passive pickups it’s ok.
In true line 6 fashion, it out of the box sounds like ass and takes a lot of dialing in for an OK sound.
that song/mix is DOOOOOPPPEEEEEEEE man!
The way the clean works is similar to the way a Fender Deluxe works.. If you up the gain you get more volume without much more (if any more) break up...
finally the review i was waiting for
This is actually a good, honest review (all of Ola’s are 👍), because it points-up a couple of deficiencies: To me, that’s a serious problem not to be able to start from Clean and then dial in as much dirt as you want / need (it’s like having an assault rifle with no single-shot selection possible), and the control-arrangement seems quite cumbersome, versus most other multi-effects units I’ve seen.
That being said, it gets some really nice tones (especially the chorus / flanger stuff), but you just have to remember that you’re locked-into at least *some* dirt.
I guess for some people that’s OK, depending on your style.
A pleasant surprise was the “early”, basic distortion - that sounds like what people were getting into back in the ‘50s with relatively low-powered, small amps - would be good for rock-a-billy 😎👍🤠🎸!
I find it hilarious that the distort effect sound like lofi fuzz.
❤Спасибо за ваши обзоры 🔥
Hey Ola always enjoy your channel question I record my own music and want a small multi effects pedal that has everything from nice clean with delays to an awesome in your face chug monster distortions. Any suggestions? Thx Ola 🤘🏻🎸
If you have time maybe upload another video, after using the recommendations from commenters here regarding how to increase volume without using the gain knob.
Curious to know what you will think of it then.
I'm considering ordering one but this video got me a bit worried.
I have a similar issue with my Catalyst 100 (it likely uses the exact same technology as this pedal as they have nearly identical features) - I cannot for the life of me get a good clean tone with humbuckers. I have this beautiful 05 Epi Dot that I have to crank my volume way down to not distort
Would have been cooler if it had some line 6 modelled real amps instead of their own sounds, also the fact that you can't download your own impulse responses makes me lean more towards getting the ir-2 since i've been considering getting a smaller modeller pedal.
Sounds digital, ok maybe not every preset.
Oh c'mooooon dude... we're in 2024 now 😅 We should have lightsaber guitars with presets integrated! lol. I'm just a fussy kid.
Having to hold the ALT button to adjust the tone knobs is such a bad design choice. You can't even chug 0000 while tweaking unless you contort your hand to spin the knob at the same time.
Would you sell line 6 pod express to me?? /Stimsson Stud
Stuff like this should have a built in metronome.
good video dude! 🎉
I have a question, do I have to connect a DI to play it live? ( To get a better sound) Or can I just connect directly to the mixer and, it will sound good?
Ola have you already listened to the new Old skool DeathMetal band Deliberalize?
This is an almost exact copy of Death. Check it out if you haven't
Thank you Ola, good job. that is not the unit for me
Ola for your ola learns series please try to learn themata by Karnivool. Please please please.
You can get clean sound you just have to turn the drive down on the amp model and the drive pedal effect.
Pretty simple .
But it's good to see Ola
Is R worded.
I guess a volume pedal with a buffer would be very beneficial but then you would be doubling the price of this thing just to get it to work properly.
Same like Line 6 POD Bean and just update to POD Express
Always enjoy your review brother 😂😂😂🎉🎉🎉
Ola, What’s your go to amp?
does this thing have a noise gate for the heavy stuff
WOW! a non-sponsirized guitar gear video on yt!? And with an realistic opinion ?? Legend