Yall keep asking so I might as well address it to clear things up... No, you can't interchange models. Meaning you can't connect a Onyx Studio 7 to a Onyx Studio 8, or a Onyx Studio 3 to a Onyx Studio 7, etc...hope that helps.
Hello, what you guys need to do is to disconnect the other bluetooth connection of the studio 7. There's should only be 1 bluetooth connection established to one phone source then after that press the bluetooth icons for 5 seconds for both so they can connect insync and find each other. Works perfect every time..! 👍🏼 hope this will help.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
It works :) Thx. I paired two # 7's together, still getting lag from time to time, noticed you have to keep them relatively close together for less lag. also the further away your phone is can cause this too
Lag occurs mostly if you have both speakers paired to the source. Only the primary is supposed to be paired to ie your phone as the other is paired to the main speaker.
I linked my speaker as soon as I got it with my iPhone and I have not had to link it again since. This is the first speaker I have had this wonderful experience with and have had many high end speakers.
It worked and sounds amazing. Did you figure it out? Im looking to purchase two more. Let me know I'm launching a radio station this week so let's link up!
By default each speaker plays left and right on its own. Pressing the play button for a few seconds will separate the sound so one speaker is left and the other is right. Why its breaking up I think you might have too much interference in the room as I have never had this problem unless the speakers were too far apart but never on the same table. They could also be defective but it shouldn't work that way. Another tip, battery life can be 8 hours. Press and hold the power button and volume down on both speakers, it'll lower the bass and increase the highs. When turned to the max its a real party as the bass does not fade out when turning it all the way up. You're welcome!
Thank you so much! You answered my question. I don't know if this will help, but I find that by keeping my speaker plugged into the wall the sound is much stronger and better. I also find I can manipulate the sound through my iPhone as there is a whole list of, different types of sounds though not actually equalizers. Meaning when will say lounge, acoustic, hip-hop, etc. etc. It works for me.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
Does linking the pair of Onyx 7's play music in stereo or just play louder music? I am about to buy a second speaker if I know I will get stereo sound when connecting them. Thanks.
I saw video to connect 1 speaker to your Bluetooth, then press both Bluetooth buttons simultaneously and hold them down for about five seconds and they should pair.
@@Eccentech... Thanks! I don't think you are supposed to hook them up to different sources. I wrote my response in the wrong place as saw a video where you hook up one speaker to your phone or iPad or whatever and then you down the Bluetooth button on both speakers for five or seven seconds, and that should be it. I'll try and get that up at the top but I actually ordered a second speaker today and it will be here tomorrow. I'm going to be really bummed out if it doesn't work.
@@Eccentech Accidentally deleted your last reply from my email. so I went to Amazon where I purchased my Onyx 7 and I wrote out my question asking if a second onyx seven could be paired with a first one and get stereo sound. I got an instant answer telling me yes. I am fairly sure the answer was from Harmon Carden. So I am going to order a second speaker and just pray that it doesn't have problems cutting out like I have seen in the videos. If you are interested, I can let you know, but will probably be at least a week or 10 days. Thank you for your email and wanting to help me. I will be checking out your videos. Blessings.🎵🎶
I notice my two Onyx 7's lose sync and one lags with the music.... I am able to sync them like you did, and it starts playing but the second Onyx 7 starts lagging the music. Pretty much so bad I just turn the sync off. Any suggestions? I picked up the Onyx 7's from Amazon.
My question is assuming 2 Onyx 7's are connected and do not cut out, will it be like a full stereo sound with the speakers separated several feet, or will it simply be louder music having them both connected? By any chance does anybody have the phone number for Harmon Kardon so I can find out as I have seen several videos where once 2 7's are connected they cut out. I was ready to buy the clips 3+ until I came upon this onyx seven and it is the best speaker I have ever heard. Thank you so much , and if I can call, I will come back and let you and everyone know what they had to say. Blessings to all!
Sounds like you have the speaker then. It sounds so good. I was set to buy the new. Klipsch speaker but something kept stopping me as the reviews weren't really great like the ones for the onyx seven. Anyway, I'm going to try and get what I saw on another video at the top so he sees it and maybe can try. Thanks again for your help.
yeah I've had all of the studios in the beginning I think the studio 3 or four I'm not sure if you could connect multiple I had four of them going at once I've got the studio 5 and 6 I got four speakers but you can only pair two at a time they don't Daisy link anymore what's really sucks and pisses me off
Não poderá. As novas gerações da HK só funcionam com no máximo duas unidades para dar o efeito stereo. As antigas HK aceitavam até cem unidades porque apenas replicavam o sinal (por protocolo próprio) e não havia a feature stereo.
HK website says, “Please make sure that the speakers are far away from other wireless devices to avoid interference. Battery level shouldn't be low.” I wonder what happens if you move them 10 or 12 feet away from each other.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
I had the same issue as you with two Studio 5s. Since I couldn't get it resolved, I decided to keep one and return the other. I really wish they would have worked correctly together in stereo mode, and it's really disappointing that Harman kardon hasn't fixed the issue by now.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
I have 2 hk studios a 1 and a 2. I can not connect. I am in the market to buy something I can pair both speakers with. Like you, I did research and even brought a transmitter. Did not work. HELP, PLEASE.
Just bought two of them as they were for sale for €100 and they paired without issues. I'm getting no lag or other issues, hope it stays that way, as they sound great 👌 Shame there is no app support though, so can't modify bass levels etc.. would seem like a reasonable expectation for this price point and considering how easy apps are to make nowadays.
@@FroZenL1Qu1d no problem, u can even set equalizer to your taste and save it assigned to any device, onyx studio. So every time ur device will connect with onyx stuio, equlizer will automaticly set up for onyx studio, if u disconnet,it wil return to basic settings. Amazing app for listening. Blackpool greets you : )
@@Eccentech I just wanted to say I am sure it is obvious this is my first time posting questions and you responded and then me trying to figure out how to or where to type back. I don't know if this is your video as I read people thanking you for your help and tutorial and I just wanted you to know I appreciate you reaching out to me and I've learned a lot today just reading here when I went to Amazon I needed to try and get to Harmon Carden employees before I bought a second speaker. I will buy one but haven't yet. Again, I'm just trying to say that it's confusing to me how to communicate with someone or post questions here on TH-cam. I don't have my own, TH-cam page for people to subscribe or watch videos, etc. I guess that's about it. It seems that this is probably one of your videos, but I am here to thank you for reaching out to me.
Won't work for me. Main speaker connected to pgone. Other no connection. Held down bluetooth buttons, they just blink rapidly in paring mode on both speakers and never connects.
I just bought my second Onyx 7 and got them to pair 1X and sound great. Today with 1 speaker connected to Bluetooth and WiFi, when pressing me Bluetooth icon on each at same time can't get them to pair. That was exactly how I did it last night. Also, this may sound stupid, but if I disconnect them from Wi-Fi or the speaker that is connected, will my music use "data" and cost extra money? I don't have a manual or a box? is there another way to do this? Thank you.
Antigamente sim. Eu mesmo fiz algumas vezes (charge 3 + Flip 4 + Onyx 4) para festas em casa Contudo, para os novos modelos, a JBL/HK modificou o software e impediu o pareamento.
You know you would have read all the info you said you didn’t know just from reading the manual. Literally on the box it says Wireless Dual Sound. And it says the same thing on HK’s website.
I will stick with the studio 4. K it tm has its own dedicated link button rather than using the Bluetooth button. If you have to disconnect the wifi then it's m it isn't worth it. Sticking with the studio 4
@@Eccentech number 7’s but I finally got it the instructions he gave on pairing them was not right entirely but I figured it out after 30 min of trying it his way
@@Eccentech in the video during the pairing process the way you barely touched the Bluetooth button didn’t work for me what I discovered after watching other videos there are 2 levels of the pairing process first level is pairing to your device second is pairing them to each other they both need to be in the hard pairing mode to find each other which is pressing and holding the Bluetooth button until the light blinks fast on both devices and then my 2 speakers were connected
Onyx 7 is by far the biggest piece of junk HK ever released. Totally unreliable to pair. Sometimes it works sometimes not. sometimes the sound is glitching and lagging even the speakers are close to each other and the phone. Also they can be difficult to turn off, just keeps restarting. Avoid is my recommendation
Yall keep asking so I might as well address it to clear things up...
No, you can't interchange models. Meaning you can't connect a Onyx Studio 7 to a Onyx Studio 8, or a Onyx Studio 3 to a Onyx Studio 7, etc...hope that helps.
Hello, what you guys need to do is to disconnect the other bluetooth connection of the studio 7. There's should only be 1 bluetooth connection established to one phone source then after that press the bluetooth icons for 5 seconds for both so they can connect insync and find each other. Works perfect every time..! 👍🏼 hope this will help.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
This worked; thanks!
Thank you
My? Is can you pair a Harmon 6 to a7
Did the trick and now works perfectly. Thank you so much
It works :) Thx. I paired two # 7's together, still getting lag from time to time, noticed you have to keep them relatively close together for less lag. also the further away your phone is can cause this too
Lag occurs mostly if you have both speakers paired to the source. Only the primary is supposed to be paired to ie your phone as the other is paired to the main speaker.
I have the same problem
Great guide. Connection worked but every time the speakers are restarted you have to link them again. Is it possible to keep them linked ?
I linked my speaker as soon as I got it with my iPhone and I have not had to link it again since. This is the first speaker I have had this wonderful experience with and have had many high end speakers.
Not sure 🤔 would have to try it again. It's my homie's speaker (the other one)
It worked and sounds amazing. Did you figure it out? Im looking to purchase two more. Let me know I'm launching a radio station this week so let's link up!
As far as I know, no. But the way I did it apparently was more complicated. Check the comments.
By default each speaker plays left and right on its own. Pressing the play button for a few seconds will separate the sound so one speaker is left and the other is right. Why its breaking up I think you might have too much interference in the room as I have never had this problem unless the speakers were too far apart but never on the same table. They could also be defective but it shouldn't work that way.
Another tip, battery life can be 8 hours. Press and hold the power button and volume down on both speakers, it'll lower the bass and increase the highs. When turned to the max its a real party as the bass does not fade out when turning it all the way up.
You're welcome!
Is it possible to use a spliter to separate the two channels, sending only the left channel to one and the right channel to the other?
Thank you so much! You answered my question. I don't know if this will help, but I find that by keeping my speaker plugged into the wall the sound is much stronger and better. I also find I can manipulate the sound through my iPhone as there is a whole list of, different types of sounds though not actually equalizers. Meaning when will say lounge, acoustic, hip-hop, etc. etc. It works for me.
Ive also not has this problem even when the speakers were 35 feet apart.
There is Stereo mode as well, this is only dual right?
I believe so
I have the same break up problem, probably going to return one of them unless I can figure out how to fix it.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
hello, does Harman Kardon onyx studio 7 connect with onyx studio 8?
No
Apenas modelos iguais
Can you pair a 7 and 6 together?
From what I can tell, no
@@Eccentech well that’s fuc*ed up. I bought a 7 today, and the man in the shop fooled me then. Fuk dis.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
Yeah but that's a lot more work
Does linking the pair of Onyx 7's play music in stereo or just play louder music? I am about to buy a second speaker if I know I will get stereo sound when
connecting them. Thanks.
I heard somewhere you can get stereo sound. I didn't confirm that though.
I saw video to connect 1 speaker to your Bluetooth, then press both Bluetooth buttons simultaneously and hold them down for about five seconds and they should pair.
@@Eccentech... Thanks! I don't think you are supposed to hook them up to different sources. I wrote my response in the wrong place as saw a video where you hook up one speaker to your phone or iPad or whatever and then you down the Bluetooth button on both speakers for five or seven seconds, and that should be it. I'll try and get that up at the top but I actually ordered a second speaker today and it will be here tomorrow. I'm going to be really bummed out if it doesn't work.
Do you have the speaker yourself?
@@Eccentech Accidentally deleted your last reply from my email. so I went to Amazon where I purchased my Onyx 7 and I wrote out my question asking if a second onyx seven could be paired with a first one and get stereo sound. I got an instant answer telling me yes. I am fairly sure the answer was from Harmon Carden. So I am going to order a second speaker and just pray that it doesn't have problems cutting out like I have seen in the videos. If you are interested, I can let you know, but will probably be at least a week or 10 days. Thank you for your email and wanting to help me. I will be checking out your videos. Blessings.🎵🎶
I notice my two Onyx 7's lose sync and one lags with the music.... I am able to sync them like you did, and it starts playing but the second Onyx 7 starts lagging the music. Pretty much so bad I just turn the sync off. Any suggestions? I picked up the Onyx 7's from Amazon.
I don’t nah. I think it’s just bad implementation tbh.
My question is assuming 2 Onyx 7's are connected and do not cut out, will it be like a full stereo sound with the speakers separated several feet, or will it simply be louder music having them both connected?
By any chance does anybody have the phone number for Harmon Kardon so I can find out as I have seen several videos where once 2 7's are connected they cut out.
I was ready to buy the clips 3+ until I came upon this onyx seven and it is the best speaker I have ever heard. Thank you so much , and if I can call, I will come back and let you and everyone know what they had to say.
Blessings to all!
I think it's 2 mono speakers, but I could be wrong cause I ain't did it in a while now...
Sounds like you have the speaker then. It sounds so good. I was set to buy the new. Klipsch speaker but something kept stopping me as the reviews weren't really great like the ones for the onyx seven. Anyway, I'm going to try and get what I saw on another video at the top so he sees it and maybe can try. Thanks again for your help.
@@TraceyLynB I borrowed a friend's cause we got it at T-Mobile at the same time
Once you do this, if you want to keep them paired for stero playback does one simply just never power them off?
I’d have to test it bro
My quetion is can these speakers connect with last years model? For example Onyx 4 with Onyx 3?
No
@@Eccentech thanks for getting back to me…
@@drstew1 np I try to respond to every comment I get
есть решение программа мульти коннект на андроид
yeah I've had all of the studios in the beginning I think the studio 3 or four I'm not sure if you could connect multiple I had four of them going at once I've got the studio 5 and 6 I got four speakers but you can only pair two at a time they don't Daisy link anymore what's really sucks and pisses me off
I have 3 onyx, but I can only pair 2 together; do you know how to connect all 3 together?
I don't think you can
Não poderá. As novas gerações da HK só funcionam com no máximo duas unidades para dar o efeito stereo. As antigas HK aceitavam até cem unidades porque apenas replicavam o sinal (por protocolo próprio) e não havia a feature stereo.
HK website says, “Please make sure that the speakers are far away from other wireless devices to avoid interference. Battery level shouldn't be low.” I wonder what happens if you move them 10 or 12 feet away from each other.
Doesn't change a damn thing
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
@@SPLSPECTRUM please don't copy and paste that all over my comments section
@@Eccentech Sorry, I'm just trying to help the people who had this problem and spread the solution. My bad.
@@SPLSPECTRUM you're good. I'm not mad just letting you know.
I had the same issue as you with two Studio 5s. Since I couldn't get it resolved, I decided to keep one and return the other. I really wish they would have worked correctly together in stereo mode, and it's really disappointing that Harman kardon hasn't fixed the issue by now.
Really? I ain't wanna hear that.
You just had to disconnect the wifi of your smartphone, or take the OS7 far away of the Wi-Fi network. It seems that the two OS7 in dual sound mode get connected by a Wi-Fi protocol, and others Wi-Fi networks closer with this same protocol can affect negatively the transmission of these two. But it worked fine here, after I simply turn it off the Wi-Fi of my phone.
@@SPLSPECTRUM
How do i stream the audio when wifi is turned off?
@Eccentech did you manage to get a solution to the pairing lag?
Nope!
I have 2 hk studios a 1 and a 2. I can not connect. I am in the market to buy something I can pair both speakers with. Like you, I did research and even brought a transmitter. Did not work. HELP, PLEASE.
You can't connect both from what I know
Can i connect older model with a new model ?
Nah not as far as ik
Just bought two of them as they were for sale for €100 and they paired without issues. I'm getting no lag or other issues, hope it stays that way, as they sound great 👌 Shame there is no app support though, so can't modify bass levels etc.. would seem like a reasonable expectation for this price point and considering how easy apps are to make nowadays.
Good man. Hope you like em.
If u use android, install power amp to listen to the music. It has well working equalizer and u can adjust bass and all other frequencies.
@@yme4me Thanks a lot for the tip mate, I'll make sure to try it out! 🤘
@@FroZenL1Qu1d no problem, u can even set equalizer to your taste and save it assigned to any device, onyx studio. So every time ur device will connect with onyx stuio, equlizer will automaticly set up for onyx studio, if u disconnet,it wil return to basic settings. Amazing app for listening. Blackpool greets you : )
Hi, could I ask what type of mp4 you’re using to connect your HK? 😊 thank!
MP4? Huh? I don't understand this question
Can I connect a studio 8 with studio 6 or 7?
No
Thanks for the easy-peasy instructional video!! I got it done in less than 30 seconds!! Thanks!
Np!
I don't have a pool table, can I do it on my kitchen table?
🤣 no. You need a pool table. Sorry. Go to a local bar or something!
Can multiple for only 2 speaker or can more than that? Maybe 3-4 together?
No
Your tutorial was great!!! I finally was able to pair both speakers.😊
No problem!
@@Eccentech I just wanted to say I am sure it is obvious this is my first time posting questions and you responded and then me trying to figure out how to or where to type back. I don't know if this is your video as I read people thanking you for your help and tutorial and I just wanted you to know I appreciate you reaching out to me and I've learned a lot today just reading here when I went to Amazon I needed to try and get to Harmon Carden employees before I bought a second speaker. I will buy one but haven't yet. Again, I'm just trying to say that it's confusing to me how to communicate with someone or post questions here on TH-cam. I don't have my own, TH-cam page for people to subscribe or watch videos, etc. I guess that's about it. It seems that this is probably one of your videos, but I am here to thank you for reaching out to me.
Won't work for me. Main speaker connected to pgone. Other no connection. Held down bluetooth buttons, they just blink rapidly in paring mode on both speakers and never connects.
You got these same ones?
You are an angel! This was driving me insane. Thankyou so much ♥️
Glad I could help
My studio 8s do not start breaking up like that unless the battery in one or the other or both is low. Otherwise it does indeed sound dope!!!
Do they have to be the exact same speakers like kardon 7 and 7
Yup otherwise it won't work. Dumb I know...
Can I pair a onyx studio 7 with an onyx studio 4?
*_Highly_* doubt it
No
I just bought 2 last night. And both of them paired just fine also working as stereo. If you still couldn't do it, let me know, and I will help you.
Considering doing this. Do you think the upgrade in sound from pairing was worth buying both of them?
Cómo lo isiste Ami se me desconecta a veces si a veces no 😢
I just bought my second Onyx 7 and got them to pair 1X and sound great. Today with 1 speaker connected to Bluetooth and WiFi, when pressing me Bluetooth icon on each at same time can't get them to pair. That was exactly how I did it last night. Also, this may sound stupid, but if I disconnect them from Wi-Fi or the speaker that is connected, will my music use "data" and cost extra money? I don't have a manual or a box? is there another way to do this? Thank you.
Please help
Worked like a champ. Thank you!
so i have a 5 and a 7 can they be paired?
Nah
The only video that actually helped me, thanks
Np
Do you know if we can pair onyx studio 7 and Aura studio 3?
Doubt it
I have the same question....I haven't find a way yet...anyone????
Can i connect onyx 7 & aura 3 ?
No
Can i connect onyx 7 & onyx 6?
No
Can i connect with jbl charge 3 or 4?
No completely different product
Antigamente sim. Eu mesmo fiz algumas vezes (charge 3 + Flip 4 + Onyx 4) para festas em casa
Contudo, para os novos modelos, a JBL/HK modificou o software e impediu o pareamento.
2x hk studio 7 are more louder than one bombox 2?
What's a "bombox 2"?
@@Eccentech JBL bombox 2
@@gioviecelli idk I don't got it
Great job and video! Thanks, gonna try it now
I turned off my wifi on my iPhone and iPad Air and still have the glitch on my two onyx 7’s.
The linking's just bad
Connect ONLY one speaker to phone or tablet and pair the other speaker to the other. I haven’t had any problems afterwards.
I didn't
I just got these same two last week and it worked. Mine aren’t breaking up at all
Weird
You know you would have read all the info you said you didn’t know just from reading the manual. Literally on the box it says Wireless Dual Sound. And it says the same thing on HK’s website.
I will stick with the studio 4. K it tm has its own dedicated link button rather than using the Bluetooth button. If you have to disconnect the wifi then it's m it isn't worth it. Sticking with the studio 4
Yeah this thing is so watered down it ain't even funny
Can two studio 4's be connected? I just bought a speaker this weekend and wondered if it's possible to pair two or multiple?
Thank you! Thank you! Thank you! Thank you! Thank you!
Np np np np np
Thank you it works on mine!
worked, thank you good sir!
Glad it did!
Hey man thanks for the video it works!!!
Dope! Np!
Thanks it worked
Np. Apparently the way I did it though is more complicated.
Thank u soooo much. 👍👍👍
Got you gang
❤ gracias!!
De nada
My 2 won’t pair 😢
Your 2 what?
@@Eccentech number 7’s but I finally got it the instructions he gave on pairing them was not right entirely but I figured it out after 30 min of trying it his way
@@mzshonna28 I am 'him' lol. Glad you figured it out.
@@Eccentech in the video during the pairing process the way you barely touched the Bluetooth button didn’t work for me what I discovered after watching other videos there are 2 levels of the pairing process first level is pairing to your device second is pairing them to each other they both need to be in the hard pairing mode to find each other which is pressing and holding the Bluetooth button until the light blinks fast on both devices and then my 2 speakers were connected
в другом видео человек соединил onyx 7 + onyx 8
Link
From what a recall, if you press the Bluetooth and the volume up button once it should go into speaker sync mode.
Ima have to try that
No one else get spotty audio ?
Mines are the globe see through kind. Maad sexy and sound good.
Oh man mine are breaking up a little ugh
Sheesh
Pair 100 together
You got 100 money?
You had them to close
🤦♂️
Mk
Ok I’m m Kim Nou A
Onyx 7 is by far the biggest piece of junk HK ever released. Totally unreliable to pair. Sometimes it works sometimes not. sometimes the sound is glitching and lagging even the speakers are close to each other and the phone. Also they can be difficult to turn off, just keeps restarting. Avoid is my recommendation
Can i connect onyx 7 & jbl c4 ?
2 completely different speakers