ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
Hydro Oil Change on IS-3200Z with ZT5400 Transaxles 2019 SeasonJ's Crazy Cutz, LLC
มุมมอง 37K
Avoid a $2000 Mistake Changing Hydro Fluid on Zero Turn MowerHelping U online
มุมมอง 276K
Ferris ISX800 engine oil change. Easy!Aaron's tractor stuff
มุมมอง 13K
Tunnel of Doors to Secret Room!! #spd #chucky #Secretrooms #shorts #youtubeshortsSpriteDer SPD
มุมมอง 2M
ผจญภัยสร้างเมืองรังกระดาษกลางน้ำ!! (พายุถล่มเมืองพวกเรา!!)OAUJUN HI-END
มุมมอง 667K
ตีนไก่ทอด ตีนไก่ชุบแป้งทอด สูตรทำขาย เคล็ดลับอยู่ที่วิธีคลุกแป้ง #ครัวพิศพิไลครัวพิศพิไล
มุมมอง 330K
เจอมือถือเครื่องแรกอายุ13ปีpeejayphat
มุมมอง 526K
Ferris 700 Hydro fluid and filter changeDoug sherman lawn and snow
มุมมอง 21K
Ferris Z3X Hydro Oil ChangeHandyGuy 2016
มุมมอง 13K
New Ferris Front Caster Bearings Need Grease Changed.A. R. B.
มุมมอง 21K
Mowin! Mowin! Mowin! Ferris ISX800Aaron's tractor stuff
มุมมอง 3.6K
Hydro Gear Oil and Filter Change on Hustler Raptor SD 75 hrSometime Is Now
มุมมอง 57K
Ferris Riding Mower IS 700Z : Transmission Oil ChangeMarkyy
มุมมอง 7K
Ferris ISX2200 grease fitting locationsMaple Grove
มุมมอง 8K
Maintenance on Ferris IS 600z zero turn mowerbeardedgarage
มุมมอง 14K
Ferris ISX 800 Zero Turn Mower - Brand New, Check your nuts!Moto-Tobo
มุมมอง 787
ฟิลิปเป โลโบ vs นาบิล อานาน ONE Fight Night 24 | 3 ส.ค.67Ch7HD
มุมมอง 350K
Her Survival skills will Fry 🔪 #camping #survival #bushcraft #outdoors #lifehackMarusya Outdoors
มุมมอง 25M
Paddy Pimblett vs King Green delivered! #UFC304UFC India
มุมมอง 3.6M
อย่าทิ้งหลอดพลาสติกบนชายหาด อาจทำให้หลอดติดในจมูกเต่าได้ #savetheworld #เต่าทะเล #shortsคิดดีทีวี | Kiddee TV
มุมมอง 381K
Live! ถ่ายทอดสดหวย ถ่ายทอดสดการออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 1 สิงหาคม 2567เรื่องเล่าข่าวร้อน
มุมมอง 824K
Ở đây chúng tôi tôi không ăn khoai tây như vậy || Naughty Angel Eating French Fries #shortsBon Bon Media
มุมมอง 1.6M
ยังยิ้มง่าย - เบียร์ พร้อมพงษ์【OFFICIAL MV】GRAMMY GOLD OFFICIAL
มุมมอง 406K
เยี่ยมไอหรั่ง หลังจากออกแก๊งไป 5 เดือน | เป็นยังไงบ้าง !!?NONTAWAT N.T
มุมมอง 73K
Thanks so much for this video...had no idea there were filters in the hydraulics!
I bought a gallon bucket pump and I just pump it into the vent plugs. It's a lot faster.
Aaron thanks for the video, as the manual isn't worth the paper it's printed on. The only thing I would recommend, is using a ratcheting wrench on the bleeder nut. I just finished my fluid change after watching your video. Thanks again!
Thanks!! Yeah that would definitely work better! 🙂
@@aaronstractorstuff7521 Well, I should have explained why (brain fart) I put my finger through the end of the wrench so I could find the dang head of that plug since you can't see it.
@Bruce Smith exactly! You can't really see the stupid thing! Lol!! That's why I put the video on here because I couldn't find any myself so I talked to a mechanic and he showed me how to do it but I'm not sure if I did it exactly like they do but it worked!! 🤷♂️
I am wondering if it works without opening the bleeder. Maybe just linger?
Now that it's been months since you did the hydro change does the machine still happens to work great after the change?
Still works great!
The pump cost around 6.00 dollars.
If you buy the Hydro-Gear tyranny oil change kit, it comes with the oil, filters, a vent plug adapter, the hose and a pump that screws into you oil bottle so you can pump the oil in through the vent plug hole.
Do you do the air purging this the manual mentions to do or is the mower good after just whats shown in the video?
I didn't do that. I read that in the manual also. I did it the same way with my other Ferris and neither of them had any problems. I don't think it would be difficult to do that but I didn't.
@@aaronstractorstuff7521 oh okay. Thanks, i didnt know if it made a difference or not, also i just did the change yesterday with brandnew oil obviously, went out there this morning and the little bit in the reserve tank was black already? And the mower was not even started from the time i changed it to this morning when i went out there, everything seems to work fine , but just didnt know if it was normal or not?
@@scottyut8282 I've noticed that too. It's darker than the oil from the engine it seems like. That's normal I guess. They all do it as far as I know.
@@aaronstractorstuff7521 okay good. Well thank you so much for the video , i just followed your video and it made the job much easier, thank you ill keep an eye out for anymore tips and ferris mower videos from you!
@@scottyut8282 glad it helped! That's why I put it up there. TH-cam videos have helped me with so many different things so I'm trying to contribute a little bit. Thanks for watching and commenting!!! Glad to hear it was a help for you.
What size in the vent plug bolt? And how did you access it? Having a terrible time.
Have another mower with the same 3400 hydros and it's much easier. But the hose and plug are flipped on the other mower. So much easier that way.
I don't remember what size it was but it was on top of the hydro pump. It's hard to get at.
Frankly I’d be alarmed if my hydro oil came out looking black like diesel engine oil. Yikes. Is that normal on those integrated units?
Yes....that's normal I guess. That's what the shop guys told me. They all look like that. 🤷♂️
hello aaron's my ferris turns on fine,but when i try to turn on the blades,it shuts off,could you help me?
There is a safety switch connected to your PTO and one under the seat. Sometimes one of them is bad and can cause that but I'm not a mechanic to know for sure but you could look into that. 🤷♂️
Do they Only have 1 filter
One filter per hydro. 2 filters total
What kind of filter?
I got the filters from the dealer. They can get you the ones you need.
What kind of oil again?
20w-50 motor oil is what is recommended. I use Kinetix brand oil.
The reason your filter was not lining up was because the camera was on. Those things are built like a tank. Full watch Aaron.
😆 Exactly! They are incredible machines! Thanks for watching Gary!
How often do you lube the heim joints? Do you pressure wash your desk?
Not sure what you're talking about. I don't pressure wash them.
The joints that are supposed to be lubed. You dont pressure w
ash your deck?
@@311hitwall I lube all grease surts a few times a year and the deck spindles even more than that. I clean the deck out at the end of the mowing day when the grass is still wet and I don't wash either of my zero turns because I use them all the time. No point to it for me.