Here we had a problem with this 1998 Ram we tried scanning and a lot of attempts to get it starting and had no luck. we went ahead to do the following...
There is a sensor wire that is rubbing the insulation off and grounding it, which shuts the ECM Down . After changing everything, all the sensors it probably corrected the Wiring and started again.
I re done my transmission pressure sensor the one with 8 wires on my 97 dodge and accidentally arked 2 wires together now my truck cranks no start. And no fire to my coil ,injectors. WHAT DO I DO ?????
So this is what Happened im my ram 2500 5.9 gas got fuel I was driving normal and it just lost power instantly and won't fire it will crank but not fire
Good tips ..if only maintenance was done it be steady....I keep changing this every 3 months and my trucks love love love it...
There is a sensor wire that is rubbing the insulation off and grounding it, which shuts the ECM Down . After changing everything, all the sensors it probably corrected the Wiring and started again.
Good work
Which sensor controls the fuel ?
Cam. ?? Or. Crank?
Crank
Crank
So you dont really know which part actually fixed the problem
I re done my transmission pressure sensor the one with 8 wires on my 97 dodge and accidentally arked 2 wires together now my truck cranks no start. And no fire to my coil ,injectors. WHAT DO I DO ?????
What did you end up doing ? Crank position sensor change?
Very helpful rn
You must to chek all the grounds before you change parts
So this is what Happened im my ram 2500 5.9 gas got fuel I was driving normal and it just lost power instantly and won't fire it will crank but not fire
Crank shaft position sensor
Could be computer!!
so just throw the parts canon at it? why not diagnose.
Bro literally said they used a scanner on it and it didnt show nothing
@@fortyoung3395 so because a customer said someone else scanned it,
You go by that diag?
Bad pick up
3500