How To UPGRADE SPLATRBALL GEL BLASTER to Metal Gears & Strong Spring PART 2 | SRB400 SRB1200 Gearbox
ฝัง
- เผยแพร่เมื่อ 19 พ.ค. 2022
- Watch Part 1: • How To UPGRADE SPLATRB... | In this video series, I show how to upgrade the Splatrball gearbox to all-metal gears with a stronger spring. The main purpose of this upgrade is to replace the plastic gears that strip and break easily. A gel blaster that doesn't fire and makes a high-pitched whining noise has stripped its gears, usually the motor pinion gear strips the bevel gear. The gears need to be replaced. There are no plastic replacement gears that match the original gears, particularly the unusual dimensioned piston plunger. The plastic gears would eventually strip again anyways. So upgrading to the metal gears will repair the gearbox, and increase the durability of the blaster.
▼ WHERE TO BUY PARTS
Read this page with a lot more maintenance info, mods, and replacement parts. The necessary parts for this upgrade will be kept up to date on this page: www.engineerable.com/single-p...
▶ Tube that should work as piston plunger shim (untested but dimensions and material seem similar to what I used) Wear-Resistant Nylon Tube, 1/32" Wall Thickness, 7/8" OD, 13/16" ID, 5 Feet Long - www.mcmaster.com/8628K64
▶ Lubricant for gears, piston and o-rings: amzn.to/3JXpw3F
▼ WHERE TO BUY TOOLS
▶ Screwdrivers - amzn.to/3wbIRd8 or amzn.to/3yDfrWN
▼ HOW TO TAKE APART AND REASSEMBLE GEARBOX
Watch this video where I take apart the SRB400 gearbox (same gearbox as SRB1200) to show what's inside and how it fits together.
[Full-length video] • How To Take Apart SPLA...
[Part 1: Disassembly only] • How To Take Apart SPLA...
[Part 2: Reassembly only] • How To REASSEMBLE Spla...
▼ WHERE TO BUY - www.amazon.com/shop/engineerable
▶ SplatRBall SRB400 Kit (Orange, Shown in this Video): amzn.to/3Ig1BuO
▶ SplatRBall SRB400-SUB Kit (Blue, Without stock): amzn.to/3wa5G0Y
▶ SplatRBall SRB1200 Kit (I haven't tested this one yet): amzn.to/3ibpEAl
▶ SplatRball 20K Orange Ammo - amzn.to/3KIZrFy
▶ SplatRball Blaster 400 Round Capacity ORANGE Magazine - amzn.to/3q7qouN
▶ SplatRball Blaster 400 Round Capacity BLUE Magazine - amzn.to/3tT1CiU
▶ SplatRball Blaster 1800 mAh Rechargeable Battery with Charging Cable - amzn.to/3u0p26b
Video Chapters:
0:00 Intro
Splatter Ball blaster is the most commonly available blaster sold in the US. It can be found at many Walmart stores, sporting goods, and online. It is sold by Daisy.
CAUTION! - Splatrball and other Gel Blasters should be treated as weapons and should not be used in public or areas where someone who is not part of the game can be hit. The police will charge you with assault with a weapon. There have been multiple instances in the news of people (mainly teens) being charged with crimes for shooting unsuspecting people in public. The gel ball projectiles can cause permanent injury to unprotected eyes and face.
▼ VISIT OUR WEBSITE
▶ Products we make: soulbuilt.us
▶▶ Amazon Store: www.amazon.com/stores/SoulBuilt
▶ Engineering: www.engineerable.com
▼ FOLLOW US ON:
▶ Instagram: / soul.built
▶ Facebook: / soulbuilt.us
#splatrball #gelblaster #orbeez
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY. - กีฬา
I just found you and you’re already my favorite mod splat ball TH-camr
Amazing work, your def. good at what you do!
Hey so if I replace the gears to metal, lube it up and then change the spring, I should be good to go? I have an SRB400 and plan to upgrade it
The piston head is out of stock on the website, is there anywhere else I could get one?
Is there a metal gear box upgrade for the HydroStrike Pulsar Pro?
Really informative videos, I knew nothing about this before watching! One question, I want to make my Splatrball blasters quieter, do you have any recommendations on how I could do that? I have read about putting a damper on the piston head, but I'm not sure how to do it/how effective it would be...
I haven't tried reducing the noise, because I've also read that the resultsfrom the damper piston heads are not worth the cost/effort, and can introduce other issues. Adding foam around the gearbox will probably have a better noise reduction.
Testing a 120 spring and it definitely rips hard but needs tonst of maintenance
is there any certain hopups that your would recommend for the srb400? also could you make i video about how to put the hopup on and some tests
I just got done hopups and testing them out now. Will post hopup videos soon
Hey so i’ve been to your website and tried looking for all the parts but it’s hard to find them with all the untested items as well. could you possibly reply with only the items you used in this video and the previous?
I've updated the page. I'll also add a list of only parts used in this video.
@@engineerable Thank you 🙏🏼
can you do this but with the srb1200? that would be really cool. nice video
Yes, SRB1200 uses the same gearbox, so you can use these instructions to do that. Here's how to take it apart. th-cam.com/video/FKxPLUxrIpM/w-d-xo.html
Will the Wolverine 15 Tooth Piston with CNC Head work
Man if you sold these I would definitely buy one, this type of work just confuses me over all but I would pay if you could send me one.
do i need all these parts or can i just purchase the metal gears itself
hello Engineerable is it ok if I put an M95 or M100 spring in the SRB1200. pls, reply soon as possible. keep up the great work.
Only if you upgrade the gears to metal, and even then, you may need to upgrade the motor and gearbox.
My sector delay chip is the one from cults 3d the blue one and the first one that you see when you search it up, but now my feeding is inconsistent, does it really change if my delay chip is different? Can I have the link or file to the chip you used?
I shared the CAD model and links on my Splatrball upgrade page: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Hi engineerable can you tell me all the parts i need to make my gun high fps better accuracy all the stuff i want to upgrade is gearbox, motors, spring, battery, faster charging cable, nozzle (anything on it) and all the stuff if needed and put all the tools i need plz be all or airsoft links amazon links below this that will be compatible with the srb1200
I have a question can you do a vid on a lighting blaster because it broke within 30 minutes and I think the gears are worn out so I need help 😅
That sucks. I will be upgrade the lightening blaster. Stay tuned.
Could i change the gear ratio from 18:1 to something crazy like 32:1 in exchange for a heavier spring like an m140?
with the change in gear ratio it will stilll fit in the gearbox the same right?
And will the stock motor be under to much stress with this change?
I think the motor won't be able to handle it. Also, the battery would also be drained way faster.
@@EM_Ind I got the stuff for it, I’ll reply to you again to tell you how it goes, I’m probably gonna hook up a 3s lipo to it so i don’t think the battery will be an issue.
Looks like this video could work on the pulsar hydro strike.
It may be even easier because the Pulsar Pro uses a more standard gearbox
is it possible to change the gear ratio on the srb400 gearbox like 16:1 or 13:1 also motor upgrade?
Yes, you can select a different gear ratio
Does it work if i use 11.1v battery with normal plastic gears and then once they stop working switch them to metal gears?
Yes
They should build it as one whole replaceable piece.. Simply old parts out slot a whole unit in one go maybe?
Where can I buy the gears from I’ve tried looking everywhere and can’t find them
Check the links on my page www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Will you make a video about the hop up for better accuracy?
Yes, working on hop up video. Stay tuned
Hop up video is live th-cam.com/video/bEzlIBcjeWM/w-d-xo.html
Hey man how long does the drum mag take to ship on Amazon
A few days
Where can I buy the tap it part because I opens my gun the other day and it was broken
www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Can you do a video upgrading the motor and other stuff to support a 11.1 battery and to mabye handle 12:1
tbh, I'm going to use a whole new metal gearbox to do that. This plastic one reaches its limit with this mod.
@@engineerable so would the gearbox be the whole thing you were just working on and the gears and spring and all the stuff you upgraded be the internals of the gearbox. Just got into messing with gel blasters and airsoft guns and was wondering
@@leakedcerz9455 Yes, right on.
Any more gel blaster surge videos coming?
Yes, what do you want to see?
@@engineerable my trigger on one I purchased is noticeably harder to fire than the others. Would trimming the spring in the trigger reduce the tension? Also any way to increase the shooting power of it? Good way to mount a beam/site that won’t destroy my friends eyes?
If I upgrade to this then my srb1200 will be able to use a 11.1v battery safely right? Will the motor overheat?
Motor will be fine for a while. When it does burn out, replace it too
@@engineerable can you also do the tracer mod and this upgrade? Are they compatible with each other?
@@DisciplineHubb Yes, the mods are independent and compatible
do you need to upgrade it to be able to use the warinterest beads or no
No, you don't need to upgrade to use better, harder ammo. Harder ammo will improve the accuracy
@@engineerable ok thank you very much
should have used a 11.1 lipo battery connected to deans for faster rate of fire
That will be next, but tbh, I don't care much for higher rate of fire. Just wasted more ammo. Also, I think that the tappet will need to be changed, and the motor may burn out more quickly.
Shouldn't the nozzle go past the feed tube in the t piece? It seems to stop short just before loading the next ball to be fired. But that's just an observation without the piece being on. Just seems short for some reason
I need to check, but normally, the nozzle tip only contacts and seals off against the other side of the feed tube, so it doesn't travel completely past it.
@@engineerable I rechecked the video, it looks like when you fire in semi auto that the nozzle isn't completely forward. I'm not sure why splatter ball put a delay Notch into their selector gear. The one I stripped on my lightening blaster is just a round tab. You'd figure the tappet plate is designed for the gels, why would you need an elongated pin? Seems like that would only be necessary for an air soft tappet plate to convert it
@@engineerable wish I could just donate a lightening blaster for you to tear down and compare! 😆
@TreYay83 I have a lightning blaster, but haven't torn it down yet. Just tested. Was a bit disappointed with the FPS
Do you think a hop up mod would be possible?
For sure. I'm waiting for mine to arrive.
What about the UnlocX gear upgrade ?
Working on it. Lots of mods to do. Stay tuned!
Where can I get the part at to upgrade mine
Link in the description. Here's the direct link to parts www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Can i pls have the link to the metal gears
All the parts are listed here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
do i need all these parts or can i just purchase the metal gears itself and not buy the plunger
You need all the parts. The stock plunger is not compatible with the metal gears.
TBH, if you want a good blaster, just buy one of these $125+ blasters from this list www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023.
Can you sell the kit? We’re I get it
List of parts is here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
@@engineerable can I buy a gun you have already built
how much does this all cost?
About as much as the blaster itself 😂
@@engineerable that’s not too bad
You should use m80 spring not m90
Ok, will try. Will that be better than stock?
I'm sure this has been asked before but could someone simply buy a full metal gearbox and plunger assembly rather than taking apart their gearbox?
I know that's not the most affordable way to hit that kind of performance, but my first srb400 broke after about 100k rounds through it or so. I bought another so I can still shoot at my homies, but I'm trying to think of the best course of action for the broken one I still have. Worst case scenario I have extra accessories and magazines now.
100k+ rounds is probably pretty good for stock Splatrball gearbox life. Yes, swapping out with a metal gearbox is better than trying to mod the plastic one. A metal airsoft gearbox will still require some minor mods. I'm working on a video of doing that.
Generation of rubber gloves.
The gearbox looks exactly like a v2 or v3 gearbox
It looks like a V3 airsoft gearbox, but the diameter of the piston body tracks is different and really Fs things up.
@@engineerable that’s super weird but cool to know. And I can see why it could be annoying
those red gels are not the best. get your hands on some AKA's or ultras.
Thanks mate! Fortunately Ultra Elites are sold in US. geltactical.com/product/ultra-elite-gels/ Will need to give them a try.
can i get one for freee lol