Looks great and well made, the only slight suggestion i'd do if i were building it would be to paint the underside/sides of it black so when it's closed it really blends in other than the board and maybe look into giving the top a "brushed" finish so that any scratches and marks it gets through use don't show up too much.
I found your channel back when you first started the wish part series with the civic. I've watched every video since then, truly enjoy your content. It informative, entertaining and exciting to see all your journeys with every vehicle you've purchased so far. Stay Committed! This was a super clean setup and dope build as well, loving the jeep so far.
Honestly, wow. I’m super impressed with how clean you managed it. The magnets and parachord making it so easy and soft is such a great idea as well. 10/10
I gotta say, if you stick with the wood cutting board, you might consider staining it dark dark. That way its not like black jeep plastic, black paracord, black metal, and then light tan wood
Started following just for the Jeep build so I don’t know your previous work, so I was very surprised at how nice and clean that turned out. Well done. Now as a former science teacher we need to talk about weight distribution….
robbie, for the grill/stove and the plastic issue that you addressed at the end. you should get some heat resistant cloth that can just lay over the plastic part while you cook but then can be removed to clean and what not.
Brooo, That is actually sick! Good job on the diy man I was just saying to my homie I’d love to do more fabrication stuff. Like you have an idea and you just have at it man I love it.
I just bought an 04 liberty as my work “truck” because I don’t want to dirty my other car and seeing these videos makes me want to do something to it to make it less boring😂😂
Sweeeeeet table, maybe this isn’t the style but I think some paracord weaves for the string support would be cool. Also maybe some spray paint on the bottom? Either way supper cool DIY table, see you next vid Robbie 🤙
Hey man, love the channel! Just recently started watching, but i love the videos. First video i seen was the epoxy floors in the garage and just loved the set up. Would love to have something like it someday! Keep doin what your doing and #StayCommitted !
Would highly recommend cutting a hole in the cutting board or the metal holder! 1. Good for a little cup holder if you need it. 2. If you’re cutting and need to dump trash, you can put a trash bag under it and just slide the trash through it!
What a great job and very well done too! Side Note: Have you ever thought about Anodizing your aluminum projects? If you Hard Anodized all that aluminum (Type III Class 2 - Black) - That would look even more amazing than it already does, offer some abrasion/scratch resistants' and really look great when tucked up.
Looking good man! I just went out and finally get myself a JK I had been wanting one for awhile so I sold one of my cars and put in some extra hours so I could get it! Can’t wait to start overlanding! Maybe some day I make my way north to Canada and we ride some trails together
Dude, that is so cool. But as you said might melt the plastic, Im sure you can come up with something to make the whole thing slide forward more. A slider like keyboard trays on tables maybe. Idk. Im just talking outta my a@@. But im sure you’ll figure it out! Killer job man! 🖤
Hey Robbie, It might be a good idea to add some anti-seize in the hole on the tailgate where you drilled into. There is a lot of moisture and I wouldn't want to see that get all rusty. But as all ways, solid job and the jeep is looking fire!
Use wire instead of Paracord. Paracord will stretch. You can pull the guts out of the paracord and sleeve the wire to cut down on noise. looks clean though.
Some of those tailgates tables on amazon go between 119. up to 179.00 dollars just install it yourself. the one 179 has a lock box that folds out to a table??? Not bad pricing either!
Actually clean AF! i really want to get a 4x4 to build a camper rig. Damn shame i would have to sell my kiddneys etc. to have a decent 4x4 in Finland :D
Looks great and well made, the only slight suggestion i'd do if i were building it would be to paint the underside/sides of it black so when it's closed it really blends in other than the board and maybe look into giving the top a "brushed" finish so that any scratches and marks it gets through use don't show up too much.
Same, i was expecting him to paint or stain the wood
Or maybe a sheet of abs plastic with a rough texture so it blend with the rest.
Even would be nice to put a piece of aluminum on the bottom side so when it's closed you don't see the wood
너도 멋지고
Another great video! You could use some sheet steel that sticks to the magnets as a temp heat shield/backsplash/splatter guard for cooking.
I found your channel back when you first started the wish part series with the civic. I've watched every video since then, truly enjoy your content. It informative, entertaining and exciting to see all your journeys with every vehicle you've purchased so far. Stay Committed! This was a super clean setup and dope build as well, loving the jeep so far.
I'm back lol so. Glad you started posting vids again we will always watch
saw the instagram story and have been waiting for the video to drop ever since!
This has to honestly be the best built DIY table anyone has done. Its actually so sick!!! Will be using this for inspo on my JK
Honestly, wow. I’m super impressed with how clean you managed it. The magnets and parachord making it so easy and soft is such a great idea as well. 10/10
It’s always great to watch robbie’s videos during a midnight snack🍃😄
Best tailgate table DIY i've seen, I did something similar today for my Bronco
love when you make your own stuff! keep the vids coming bro! appreciate you!
Unbelievably clean install man! Love the use of magnets. Loved the video!
That’s the coolest thing ever! 😂 I love how clean it came out 👌 you should put a black plastic sheet on the bottom so it blends in when it’s folded up
Really nice job on this! I could see a company getting on touch to get measurements to mass produce that design.
jajajajajajaja
Glad your still around last time I heard from you was back when you finished the turbo EG Civic
Im planning on buying a bronco, so almost every jeep video is inspiration for my future build
This came out fricking awesome.
Soooooo cooooool to see Robbie again!
Solid idea. The Wrangler is so versatile, but limited on storage compared to a few other vehicles.
Awesome DiY upgrade. I need to do this to my JL.
I gotta say, if you stick with the wood cutting board, you might consider staining it dark dark. That way its not like black jeep plastic, black paracord, black metal, and then light tan wood
Diy tailgate table for jeep jl. Yes sirrr!! And thanks!!
Looks so good! Props. Definitely get a heat shield on that plastic cover for that door tho haha. Amazing job!
Started following just for the Jeep build so I don’t know your previous work, so I was very surprised at how nice and clean that turned out. Well done.
Now as a former science teacher we need to talk about weight distribution….
Absolutely love your tailgate table. Trying to create something that works in my car. Fab work, I would be super happy too if my own idea works.
Crazy clean build.
Should totally wrap the top of that aluminum piece with some contact paper or something so it doesn't get all scratched up
wow .. this is amazingly too clean for a DIY build. great job
Bro, that looks amazing, really great figment
robbie, for the grill/stove and the plastic issue that you addressed at the end. you should get some heat resistant cloth that can just lay over the plastic part while you cook but then can be removed to clean and what not.
He uses an outside grill the lid is the splash guard
The way the song and die grinder sync up at 18:37 is crazy
I have the rough country tailgate table and honestly the damn thing is super solid.
thats actually surprisingly clean!!
Great tray and outstanding work Thanks
Very nice craftsmanship and design!
Brooo, That is actually sick! Good job on the diy man I was just saying to my homie I’d love to do more fabrication stuff. Like you have an idea and you just have at it man I love it.
Such a great build that I subscribed to see more.
Are you done building cars now?
Dude you made that so clean!
you should invest in a leaf blower for winter/snow days - i did myself a couple of weeks back and its extremely easy and so much fun!
7:10 - When your wood wants to get up it’s the rubbers that always ruin it.
Sorry. I’ll see myself out. Lol
Robbie I'm an eagle scout!! You gotta try a tautline hitch on it. It will work amazingly!
Bowline on either end would work great as a navy member I use the bowline for a ton of lifting and securing
New Robbie video, let’s gooooo
damn brother, A+, I think I'll do the same build.
I just bought an 04 liberty as my work “truck” because I don’t want to dirty my other car and seeing these videos makes me want to do something to it to make it less boring😂😂
Badass job! i say for the cutting board, cut like a slot in the bottom of the C-channel and drill a screw through the slot into the cutting board.
*You ALWAYS do excellent work!*
Wow! Love this set up 🙌
Sweeeeeet table, maybe this isn’t the style but I think some paracord weaves for the string support would be cool. Also maybe some spray paint on the bottom? Either way supper cool DIY table, see you next vid Robbie 🤙
Good job man great DIY.
Hey man, love the channel! Just recently started watching, but i love the videos. First video i seen was the epoxy floors in the garage and just loved the set up. Would love to have something like it someday! Keep doin what your doing and #StayCommitted !
Miss these DIY style videos!
Looks great man. Well done.
nice video bud clean and simple
Would highly recommend cutting a hole in the cutting board or the metal holder! 1. Good for a little cup holder if you need it. 2. If you’re cutting and need to dump trash, you can put a trash bag under it and just slide the trash through it!
You could add a MOLLE panel to the underside for storage as well... Nice build!
What a great job and very well done too!
Side Note: Have you ever thought about Anodizing your aluminum projects? If you Hard Anodized all that aluminum (Type III Class 2 - Black) - That would look even more amazing than it already does, offer some abrasion/scratch resistants' and really look great when tucked up.
At the 24.00 mark.
"$30 for the piece wood"
While pointing at the sheet of metal 🤣🤣🤣
Spray paint the bottom black so it all blends in. Other than that it’s awesome !!!
That turned out great!
This build was fire!🔥
Awesome job. I like it.
so clean
Super sick! The DIY tailgate table came out super clean, love the idea of building it then going off and buying $150+ accessory lol
Looking good man! I just went out and finally get myself a JK I had been wanting one for awhile so I sold one of my cars and put in some extra hours so I could get it! Can’t wait to start overlanding! Maybe some day I make my way north to Canada and we ride some trails together
You need a gas strut to make the tailgate hold at a 90 degree angle. It will be a blessing when you camp on a decline/incline
Very nicely done
That one upside down clip had me rolling ngl
Loving these videos 🔥🔥🔥
Dude, that is so cool. But as you said might melt the plastic, Im sure you can come up with something to make the whole thing slide forward more. A slider like keyboard trays on tables maybe. Idk. Im just talking outta my a@@. But im sure you’ll figure it out! Killer job man! 🖤
yooo looks SICK
Amazing vid once again 🔥🔥
You should get a sheet of abs plastic. Make a bottom peace that covers the underneath of the table. So when it's closed it disappears.
Got the notification for this video while watching v1 civic videoa
Great job!
Hey Robbie, It might be a good idea to add some anti-seize in the hole on the tailgate where you drilled into. There is a lot of moisture and I wouldn't want to see that get all rusty. But as all ways, solid job and the jeep is looking fire!
I get this feeling that Robbie just wants to do a Van Life series.
loved this vid bro
so cleaning looking you should start a company LOL
Another video! Where is the notification gang at?
really nice job
Use wire instead of Paracord. Paracord will stretch. You can pull the guts out of the paracord and sleeve the wire to cut down on noise. looks clean though.
Add 1 more layer of aluminum, so when you use the burner you can lift it up as back wall to keep it from melting the plastic.
Excellent 👌!
damnn! you prolly need to paint the metal table to make it look good, but all in all its a banger!
Love this mod!
Lol I'd said "dudddeee" insync with you st 16:16 freaking tactical asf
Miss the civics
Yeah holy shit do I miss the 2-car garage/ warehouse stuff with all the bodywork, Bondo and paint shenanigans
Where he'd buy a lemon, and turn it into a gem. Now it's "modding this brand new jeep"....
@@santora06 wish parts/ budget build/ a budget I can relate to -> 40,000$ in before parts
We back ❤️🔥
Surely we can get a ATV video some time soon!
Another banger from my man Robbie! Hey, what's with the BRZ lately? It hasn't been in the videos like in forever, is that car like properly finished?
Love the vids!
Love that he starts the jeep and then checks to make sure it's in neutral! 😂
i mean its a start stop button, you have to put the cluch all the way down, the order doesnt matter in this case
Some of those tailgates tables on amazon go between 119. up to 179.00 dollars just install it yourself. the one 179 has a lock box that folds out to a table??? Not bad pricing either!
Sick!!
Actually clean AF! i really want to get a 4x4 to build a camper rig. Damn shame i would have to sell my kiddneys etc. to have a decent 4x4 in Finland :D
That’s 🔥
You should get a snowmobile and go one a trip with the Jeep and sled!
Well now I know what I'll be doing with my jeep
Nice build!