That's exactly how I do it. I do use a rubber sleeve, thou, on the plier. I find it grips better. Now, one thing I do differently is that I test for any leakage before I place the h-block sleeve back on. Reason is that I failed once and ended with a mess just because that sleeve covered a mistake I should've noticed straight away.
@@dandesigns3d because my printers are in enclosures, I test the print without the sleeve. A short 30 min model does it, as long as temp is a little higher than the one you normally use. Like, 220 C for PLA.
i would recommend you remake this video. Holding your heater block with needle nose pliers is a no-no. Look at your video when you are putting it on and you will see your heater block twisting. Much better idea using a wrench on the heater block.
Thanks for watching. It's pretty hard to get a wrench on it without disassembling. The pliers work fine you just have to apply pressure opposite the socket wrench. See 3:03 the pliers actually tweak the heater block the opposite direction of the socket wrench. That movement is not much or harmful and will happen with a wrench too.
How do you get a software update? mine doesn't looks like yours, also if u can, can you make a video tutorial please? btw nice video help to change it , and hope works well hahaha
Had to contract creality, my s1 pro nozzle was just getting tight after putting it on with me fingers, then sudden stopped catching and got loose, and now there's no threads on my heater block
That's exactly how I do it. I do use a rubber sleeve, thou, on the plier. I find it grips better.
Now, one thing I do differently is that I test for any leakage before I place the h-block sleeve back on. Reason is that I failed once and ended with a mess just because that sleeve covered a mistake I should've noticed straight away.
That is a good idea. Do you just print that first print without the boot or remove it and check after the first print?
@@dandesigns3d because my printers are in enclosures, I test the print without the sleeve. A short 30 min model does it, as long as temp is a little higher than the one you normally use. Like, 220 C for PLA.
Many thanks for this video as it is exactly what I was looking for for my Ender-3 S1 Pro!
Glad it was helpful!
Great video. Thx was very helpful.
what firmware are you running? mine doesnt have that breakdown of the auto bed level like yours and i'm super envious lol
I'm on 2.0.8.28F4. I had to log into creality cloud to find it.
I made a video on updating the firmware on the Ender 3 S1 Pro. Here is a link th-cam.com/video/GEZkwkDDf1g/w-d-xo.html
i would recommend you remake this video. Holding your heater block with needle nose pliers is a no-no. Look at your video when you are putting it on and you will see your heater block twisting. Much better idea using a wrench on the heater block.
Thanks for watching. It's pretty hard to get a wrench on it without disassembling. The pliers work fine you just have to apply pressure opposite the socket wrench. See 3:03 the pliers actually tweak the heater block the opposite direction of the socket wrench. That movement is not much or harmful and will happen with a wrench too.
you're a genious. Thanks!
Wow! I don't know about that but thanks!!
Why is your level menu different? I dont have those values pop up, only what you see on screen at 4:31
I am probably on a newer firmware than you are. If you want to update yours check out this video th-cam.com/video/GEZkwkDDf1g/w-d-xo.html
How do you get a software update? mine doesn't looks like yours, also if u can, can you make a video tutorial please? btw nice video help to change it , and hope works well hahaha
I made a video on updating the firmware on the Ender 3 S1 Pro. Here is a link th-cam.com/video/GEZkwkDDf1g/w-d-xo.html
Had to contract creality, my s1 pro nozzle was just getting tight after putting it on with me fingers, then sudden stopped catching and got loose, and now there's no threads on my heater block
Good luck! They are pretty slow to respond. I bought this one and it worked well for me. amzn.to/3WRYzr8
Best thanks 🙏👍👍
You're welcome!
Where do you order nozzles? Link?
I got mine from amazon. amzn.to/4dXH6Tn (affiliate link)
Uh why do you have a touchscreen, mine doesn’t. Is that an upgrade you did?
You probably have a base model ender 3 s1
@@ChaseGoods hah, you’re probably right… thanks 😊
Thanks @ChaseGoods . Yeah the touchscreen is one of the upgrades on the Pro version.
no one noticed the double nozzle switch hahaha
I don't see what you're talking about. Maybe you skipped around in the video.
@@dandesigns3d At 4:00 the new nozzle is brass, and then at 4:03 it cuts to being steel coloured 🤔