How to Replace Rear Wheel Bearing & Hub Assemblies 2013-2019 Ford Escape

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ก.ย. 2024
  • Buy Now!
    New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
    This video shows you how to install a new wheel hub and bearing on your 2013-2019 Ford Escape. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
    Estimated installation time for a professional technician is approximately: 2 hours 0 minutes
    This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2013 Ford Escape
    2014 Ford Escape
    2015 Ford Escape
    2016 Ford Escape
    2017 Ford Escape
    2018 Ford Escape
    2019 Ford Escape
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/obQx/1A...
    • 13mm Socket 1aau.to/ocoh/1A...
    • 19mm Socket
    • 32mm Socket 1aau.to/oeJ/1AA...
    • Brake Caliper Compressor Tool. Single Piston. Screw Style.
    • Brake Caliper Hanger 1aau.to/ooa/1AX...
    • Needle nose pliers 1aau.to/oKm/1AX...
    • Needle nose pliers 1aau.to/oKm/1AX...
    • E14 Socket
    • Ratchet 1aau.to/ocn2/1A...
    • Socket Extensions 1aau.to/ocoh/1A...
    • Torque Wrench 1aau.to/obpJ/1A...
    • Gloves 1aau.to/obv6/1A...
    • Safety Glasses
    • 7mm Hex Socket
    • Floor Jack 1aau.to/oaIL/1A...
    • Hammer
    • Jack Stands 1aau.to/oau2/1A...
    • Pick 1aau.to/o9h/1AX...
    • Punch
    • Wheel Chocks
    • Wire Brush 1aau.to/oAj/1AX...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

ความคิดเห็น • 4