Luke Skywalker's Lightsaber 🔦 [DIY, 3D-printed]

Because you liked so much my previous lightsaber video, here is another one from Luke Skywalker.
Thanks again ‪@3DPrintingWorlds‬ for this awesome STL:
www.printables.com/model/3721...
My best print sheet: oseq.io/?sca_ref=2923158.mPJc...
Featured 3D printer:
Original Prusa MK3s: shop.prusa3d.com/#a_aid=Dombi3D
Prusa MK3s Clone (Fysetc version): s.click.aliexpress.com/e/_9H141D
#starwars #lukeskywalker #lightsaber #3dprinting #timelapse #shorts

[@MDigitalProductions]

Just like the ones I used to have as a kid!

[@GoldFromMinecraft]

I still have some of these ones

[@Alastor_1509]

Do you remember where you buyed it pls?

[@kirboioproductions74398]

@@Alastor_1509 they are still available at either Disney at the end of Star Tours you can make your own custom Lightsaber or you can buy one at Walmart for like $20.00

[@Alastor_1509]

@@kirboioproductions74398 nice thanks

[@kirboioproductions74398]

@@Alastor_1509 no problem dude

[@hedgehogaj]

Given how my first attempt at this went, I expected the last piece to go flying into the wall.

[@abu5ivp1ll0w5]

This brings back memories of the ones I played with as a kid

[@anidiotandhisfriend4775]

I wanna see if Revan’s or even Cal’s sabers are possible.

[@pepethefrog7229]

Agreed! I want a cal Kestis lightsaber sooo bad

[@MartinaBarro]

Fr​@@pepethefrog7229

[@nathanbaumgardner2470]

I could work on one!

[@perivoj]

Do Anakin's lightsaber next!

[@CodyTheDragonSamurai]

0:11 nice

[@eccotube5606]

YES LUKE SKYWALKER'S LIGHTSABER

[@ryah6447]

This is so freaking cool

[@cringepolice4096]

I’m shure the switch has a good personality

[@C0R3894]

Sure*

[@thebestsonic7660]

This might be a lot to ask, but can you do cal kestis’s? It haven’t been done before. If so, could you post the file to make it?

[@r_u_3d]

Second timelapse shot was so amazing wow

[@Deathslayer01]

Lightsaber anakin pliss 🙏🏻 😇🥰

[@3DPBakery]

Wow this place was a lightsaber shop !!

[@evercar5769]

This is pretty cool. There's only one problem: it's too short. With its height, the design has to be squished, and that makes it look weird.

[@skygirl.leilajedi.starwars]

Can you do one for me??? Please??? I love it!!!!!

[@ondryderrCZ6666]

Try to add lights to it
It will look way more better

[@civhonbmm3]

That’s awesome nice job on the final product

[@crazybird199]

I should print one of these with a PETG blade. incredible timelapses!

[@midnight_xboxvr]

i need the 3d model now!

[@blueraccoon1088]

"I see you constructed your own light lightsaber"

[@Dar_ishere]

Memories…❤

[@jurassicjohncretaceousback6386]

Can you make fang the tyrannosaurus from primal

[@swaggerboyasd2155]

My 10 year-old self is just dripping with nostalgia right now.

[@loritotz355]

PLEASE do anakins

[@yourspiritualconsultor]

Astonotlar geminin yakınlarında anlaşılmaz ve....

[@haaf_z007]

If only i had a 3d printing machine 🥲

[@hammythegamer3898]

Anakin lightsaber next

[@thedarkknight803able]

I want one

[@TobyKester9]

Could you do Darth Vader's if you haven't already?

[@Itachi---Uchiha]

Darth Vaders lightsaber ist the next pls😊

[@O_KODEL_GI_NE]

it was necessary to add lighting to illuminate

[@millionyears7341]

Add fan for air pressure lift blades up

[@samuelrakic6924]

Hey @Dombi3D.... any chance you could let us know what grey Filament you used here? It looks really realistic like metal!

[@Dombi3D]

This one:
www.dasfilament.de/filament-spulen/pla-1-75-mm/444/pla-filament-1-75-mm-anthrazit-v2?c=11

[@samuelrakic6924]

@@Dombi3D amazing... thanks!!

[@zoup7975]

Make a closed gate system

[@Bestgamer4.0goat]

My dad is making me a qui gon jinn decoration

[@mir0500]

What is the format like is there a link for this that you can put

[@remixplays5177]

Please do ezra

[@user-yc3zz6wo6j]

How did you get the different color filaments and how euro would they be in a lightsaber fight

[@jo5haussie]

Do darth maul’s

[@ericvolker680]

I want to buy this Lightsaber! I have a RGB Lightsaber from Luke Skywalker becouse I love this Design of his Weapon

[@remixplays5177]

Ezras!

[@ZukoRenken]

Do Kylo

[@PadmeAmidala837]

Cool

[@phantomarts7642]

I could do that with red instead of green

[@anidiotandhisfriend4775]

Do you think you could possibly do other weapons?

[@BluePhoenix142]

Have you done Anakin's ep 3 Lightsaber?

[@Regionblox_YT]

I have one at my house but at xmas im getting the glass version

[@elihusanchez6451]

Can you do his blue lightsaber

[@williamaguilar5519]

How much would it cost to commission one of these?

[@TechNinja6]

Where did you get the files for the separate blades

[@tdx656]

you know the answer ? I have the same problem

[@AlphaLikesRoblox]

If it glowedI would’ve bought it

[@JustDW_]

How do you do octolapse with your GoPro??

[@bobmac5223]

Did you use PLA?
What kind of density ?
Is it in anyway battle capable ?
Appreciate your videos

[@Dombi3D]

It is printed with PETG.
20% gyroid infill for the handle.
The blade part printed in vase mode.
It is not capable for battles, more of a decoration.

[@rockinHurley777]

How durable is the blade? Also how do you get rid of elephant foot?

[@Easondoesrandomstuff1]

Vader’s lightsaber plz

[@sahidurrahman7497]

HASBRO BASIC LIGHTSABER KNEW IT???!!! 😃😃😃😃😃

[@broficient477]

Nice

[@ukim5107]

Make darth maul lightsaber

[@gabrielasolla9118]

Dark Vader light Saber ples

[@itsmandez6491]

Can you make a vader or anakin’s next

[@zenitsuagatsuma2508]

Can you do Ezra Bridger first or second saber

[@Bas_Rp]

Count dookus please if u havent

[@MasterJediYoda.]

My lightsaber, I want to see

[@Linkr07]

i have the same one but i accedently put the whrong green thing in another piece and now its stuck and what do i have to do now?

[@joshuagarcia7501]

Nice, now ad a bright led light

[@chrisf5475]

Are the tubes done in spiral / vase mode?

[@Dombi3D]

yes

[@Braindeef]

I'm that much if a nerd I knew what it was before the but cap finished, just from the studs.
I'm not sure if that's sad or if I should be proud

[@Warrior_Saint88]

print it in Nylon

[@affan.45]

Could we get a stl file please?

[@GoTips]

How did you get it to print the different colors?

[@APlaneCrazyAndStarWarsAddict]

Hey guys how do these work..

[@speedtriprr537]

How did you get different colors printed?

[@chaomatic5328]

How did you get different colours on the hilt's print?

[@nathanhill4858]

I want that please 🙏😢

[@OriginalCartuck]

Where can I find this at

[@user-es6nr9hi4j]

What was the 3d printer used in this video

[@Toothpastevr2.0]

Wow 🤩🤩🤩🤩

[@Azimaafraz1404Shaikh]

Do you sell them

[@anakinnskywalker5751]

Do vaders light saber

[@Prisonermonkeo]

Make a light stopper what do you means it’s a light that is on for 100 minutes and then off for 100 minutes and then it turns back on

[@oneleo1361]

You should sell these

[@davidmcaninch4714]

That’s cool and all, but it’s too fragile.

[@sajidnytours]

Could you sell some of these in pls😮

[@chancedimmock]

Vaders please

[@efe12305]

Star killer ligthsaber

[@hrandika7834]

Better than hasbro one

[@lukaszchojnowski659]

This is Grogu edition?? Little short

[@ndimensiongmr8467]

You should make Anakin’s lightsaber

[@AnonymousRetts]

How much does filament swapping machine cpst?

[@williamhanson8142]

Can I duel with it

[@SwordsMasterplays1612]

Anakins light saber

[@McFrozenNuggets]

YOOOOOOOO!!!

[@hylaysim4837]

Rey pls

STL link

[@O_KODEL_GI_NE]

I would use a tablet battery

[@Tomorrow_Never_Know]

Luke’s blue lightsaber

[@anthonysileci5121]

What kind of 3d printer do you have and how much does it cost?

[@kingzach74]

At this point, just get an Anker M5 or M5C. They are phenomenally reliable.

[@wranglerdeereih09]

Atleast the part of the hilt isnt very fat like disneys

[@zoup7975]

Link?

[@southparkkid6464]

Darth Sidieous lightsaber