Hi , the code p1259 is issues for EGR valves and Vtec solenoids . So the CO2( oxyzen censor) is not problem for this code ? Thanks a lot for your video.
I have a 2000 Honda Accord, my check engine light came on after having a echeck. They said the solution could be the (VCT) Solenoid but the diagnostic code is (P1259). Should I check the VTEC System and see if that’s the problem? The car isn’t leaking any oil from the VTEC.
Hey man I am having the same issue, I’ve replaced the vtec solenoid cause it ran code p1259. It’s still running in limp mode unless I take out the 02 sensor for some reason but it seems okish, do you happen to have any suggestions?
Hi , the code p1259 is issues for EGR valves and Vtec solenoids . So the CO2( oxyzen censor) is not problem for this code ? Thanks a lot for your video.
P1259 is VTEC solenoid issues
P0401 is EGR problems
I know I said it before. But anything to do with the lude and h22 helps me man. 👍
Of course but I'm far from stock with the prelude so only so much I can share on it that would actually help 🙃
Can you make a video on how to swap H22 inside of a Honda Accord 1998 and all the things that you have to buy to swap it .
And yes sir if you look I'm in the middle of building my other H22 for the Accord I'll be having a video come out for that soon 😉
I have a 2000 Honda Accord, my check engine light came on after having a echeck. They said the solution could be the (VCT) Solenoid but the diagnostic code is (P1259). Should I check the VTEC System and see if that’s the problem? The car isn’t leaking any oil from the VTEC.
Check your oil level bro, mine ended up being a blown head gasket, it's was mixing my oil with coolant and burning it off making it run low on oil.
I know I’m late but does a bad solenoid cause oil to leak
No but there are seals that's can go bad that can leak on the solenoids
Hey man I am having the same issue, I’ve replaced the vtec solenoid cause it ran code p1259. It’s still running in limp mode unless I take out the 02 sensor for some reason but it seems okish, do you happen to have any suggestions?
Does it still run with 02 sensor out in limp mode will it take off and go up to speed or still limp
Which o2 sensor are you taking out the one before the cat or after?
If it goes on limp mode it could be the ecu
Thank you man
💯 appreciate it!
Anytime man!
Is there any possible way you can provide link for the V Tec solenoid
Check the description 😁
aye bro i have the same issue and i’m leaking oil you think if i do that will it stop the leaking? i have a 3.0 accord 02
Depends on where it’s leaking oil from
Ima try to do this myself i have the same issue auto trans won't Rev past 4k (2001 2.3l lx)
Yeah figure out why it’s going into limp mode
I already changed mine still getting code and really hard cold start
What's it doing on cold start just struggling to run right until it's warmed up?
I’m having this issue but I’m pretty sure my car isn’t vtec
Hmmm what's it doing, I'd started with your spark plugs and wires bro