i know this shit is probably eye rolling simple for you guys, because you are pro's, but you should all know, your videos like these, for us plebs, are gold man... you guys are killing it on this channel. thank you scooter west!
Hi Jeff could you please teach us how to install 13 inch rims on a gts/gtv hpe. Please include the abs adaptor kit for the rear wheel as well. Thank you and keep the videos coming!
Hey Robot ! Thanks for the great content ! Do you still think the best setup for the 300 HPE with the Malossi variator is running the stock spring and 14 gr rollers ( not the 16 gr ) ? Cheers ! 🛵
one of those screw fasteners fell inside the front of my vespa, in front of the glove box area.. i guess i didnt know, it became loose and fell right off. now my glovebox just falls down when opened....just wondering if its bad to drive it like this with a screw rolling around the front of the vespa?
Robot, great video. I'm having the same issue with my Piaggio bv350 glove box is loose. However, there doesn't appear to be an easy way to fix loose hinges... Please help, any advice is much appreciated 🤙
We have this video covering body work removal on the BV350, which may give you a better idea of how to get to those fasteners. th-cam.com/video/_KNlxaOvnrw/w-d-xo.html
@@VespaMotorsport hey just bought an after market tach for my scooter from you guys. I took off the glove box to rout the cable and when I put the glove box back on the key release became disabled. It's a 2013 gts can you tell me where I might find the connector between the starter and glove box? Or maybe what I might have done to disable it? Really appreciate your guys work you're keeping the Hobbie alive for us amateurs
I've had good luck with a few drops of epoxy applied to the screw threads. Loctite doesn't seem to adhere to plastic as well as epoxy does, although I haven't tested this methodically.
i know this shit is probably eye rolling simple for you guys, because you are pro's, but you should all know, your videos like these, for us plebs, are gold man... you guys are killing it on this channel. thank you scooter west!
Glad to help, thanks for the support!
Hi Jeff could you please teach us how to install 13 inch rims on a gts/gtv hpe. Please include the abs adaptor kit for the rear wheel as well. Thank you and keep the videos coming!
nice idea ! is there also a trick how do remove the door for painting ?
Thank you Robot.
Any time
Hey Robot ! Thanks for the great content ! Do you still think the best setup for the 300 HPE with the Malossi variator is running the stock spring and 14 gr rollers ( not the 16 gr ) ? Cheers ! 🛵
Is it normal to getting heat from the front section - seeps thru the throttle ?
This clip is Designer approved 🛵❤️🤖
one of those screw fasteners fell inside the front of my vespa, in front of the glove box area.. i guess i didnt know, it became loose and fell right off. now my glovebox just falls down when opened....just wondering if its bad to drive it like this with a screw rolling around the front of the vespa?
Any tips on when the glove box door is stuck in the closed position?
Thank you!
You're welcome!
Hey robot i am from india i want replace my vespa s125 dual pocket board to golve box does it possible ? Pls answer
Gracias
Robot, great video. I'm having the same issue with my Piaggio bv350 glove box is loose. However, there doesn't appear to be an easy way to fix loose hinges... Please help, any advice is much appreciated 🤙
We have this video covering body work removal on the BV350, which may give you a better idea of how to get to those fasteners.
th-cam.com/video/_KNlxaOvnrw/w-d-xo.html
Thanks much!!
@@VespaMotorsport hey just bought an after market tach for my scooter from you guys. I took off the glove box to rout the cable and when I put the glove box back on the key release became disabled. It's a 2013 gts can you tell me where I might find the connector between the starter and glove box? Or maybe what I might have done to disable it?
Really appreciate your guys work you're keeping the Hobbie alive for us amateurs
Thanks.
hello how to open the glovebox without a key? i forgot the masterkey inside the seatbox
Or for a more permanent fix, remove the glove box and apply some loctite to the screw threads.
Even with Loctite, they still loosen after a few years. I'm on my third GTS/GTV and I've done it many times, always removing the whole damn thing.
I've had good luck with a few drops of epoxy applied to the screw threads. Loctite doesn't seem to adhere to plastic as well as epoxy does, although I haven't tested this methodically.
😊
My glove box door won’t open. Does anyone know how to open?
Boa tarde.this is my dream but here in brazil i had 26 thousand and it costs 32 thousand so i ended up getting an X Max, one more day i can buy it
👍✌🇧🇪