Installing New FORD Rear End on the LS10!
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2021
- One of the final pieces of the LS Swap for the S10! This Ford 8.8 Rear end is a common swap and hopefully for good reason!
THE COMMITTED CREW:
www.TheCommittedCrew.com
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2 - ยานยนต์และพาหนะ
love how you've built a budget turbo civic, an immaculate BRZ on bags and now an LS swapped S10. you have so much variety on the channel it's crazy
lol i wouldn't say "budget" turbo civic, that things got ktuned everything lol, including a k swap. unfortunately not a cheap project :/
Now time for a boosted Volkswagen 5 cylinder :)
@@ryantoews3886 how long have you been here? He originally built a budget turbo civic before the k swap civic
I love Robbie and all but what U described sounds like any other car channel, but his personality just puts his own twist on his videos
@@ryantoews3886 he did an eBay turbo budget civic before the k swap. Go dig through some old videos and you’ve got a lot to catch up on 🤣
Move the holes in the axles 1/2" so the axle slides back and you dont have to shorten the driveshaft, you can do that when you need to move them anyways.
Found your videos as I’m gearing up to swap my 99 s10 definitely gets me pumped.
dude you should consider some fender flare action on this thing i think it would look sweet
Really looking forward to see the (L)S10 rolling again!
I think the kansei’s look sick on the s10 honestly, like you said just slap a meatier tire on there an call it a day, I’d figure out how to get them on the front as well! 🤝
The wheels suit the S10 wayyyy more than Genny!!! I think it looks killer!!
i miss the s10 wish we still saw it around on the channel.
Your amazing Robbie ❤️ love the s10 vids can’t wait for more🔥
Your videos are perfect for learning more about the S10, thank you
Keep the good work!!! Love your stuff
you know what dude i was having a pretty bad day and then I saw you posted and my day immediately got better, I really appreciate you and your content man
S10 videos have been fun. Thanks Robbie.
This video is the only reason Im changing my rear end on my 91 s10 5.7 swapped im running 2010 Camero 20 inch wheels and 5 inch lowering blocks. Always heard it wasn’t to hard and this video just made everything easier !
i love your videos man one of the only car channels i can follow. much love ❤️
So happy with the variety of content
Builds mint man keep up the work homie
Truth is that I love the way it looks with them wheels
this truck has so much potential keep it up robbie
Naw these videos aren’t boring I love them man 🔥
Let’s go baby s10 vids r the best
Nice! I've been wondering when an s10 update was coming. Im in the process of Ls swapping an s10. I narrowed the 8.8 before swapping the motor in.
Damn I'm early for once!!!! Can't wait to see this build complete!!!
I love you Robbie. You’re my favorite TH-camr by far
To measure for a drive shaft. Put the yoke all the way in the transmission. Then measure from the outside edge of one universal to the center of the other. This way you have about a 1/2 inch of play for suspension travel so it doesn't hammer the internals of the transmission on bumps.
What’s so crazy is that I personally would not own any of Robbie’s vehicles. Not that they aren’t nice because they are all beautiful. Just not really my style, but I always watch every video because I love Robbie. It’s not about the cars for me (yes I love watching and learning about cars) but I love his drive and personality 100 times more then the cars he builds.
Super sick Stay committed 💯❤️🔥
Man i love this project please keep it up :)
I'm no professional, but I believe the rear-end U-bolt goes over the rear end and through the spring perch. At least that's what it is on my s10 and I kind of want to keep the rear end you know.
You can buy ford spring perches on summit racing for literally $12 a pop if not less... Cut the old off, get you a level angle gauge so you can set the angle of the yoke and weld em up!!
It will probably be better in the long run to just cut the spring perches and move them since you mostlikely need to change the pinion angle also.
Let’s goooooo another Robbie post
Get a slip yoke eliminator those help a lot it worked for my Jeep when I put a 8.8 in it
in 7:34 i thought he was pulling that shit effortlessly and i was like "man was robbie this ripped?? i fell bad i he has some hatter and he finds them...." and then realization came as hard as a truck
Best rear fir the width , love mine
❤love it man. Low is just a small part of the look.
Constant content‼🔥🔥
Those wheels are a hell of a vibe
good video friend! a question why the differential of my s10 is more on the left wing, to someone who looks well established.
Your going to have to shorten the drive shaft you can’t take away from your slip yoke because if you do it’s still super close to the trans and can run the risk of jamming in the tail of the trans and hurting it. Shorten the drive shaft and keep the proper spacing needed for the transmission.
Dude it's gonna a be lit!
WHOOOO BABBBYY ROB ROB
Nice video.How far off center was the pion?
Id Deffinetly keep the sway bar , itll help with the v8 power and cornering .
I had a slammed 88 Mitsubishi might max. It had 9×16s all the way around. It poked almost 2in.. the only thing that sucked. Not having power steering lol
we literally had a junk 97 explorer at my school and someone from another course came and got the limited slip diff before the truck got scrapped… they are very popular lol
I can’t wait till it’s painted
Isnt the 8.8 ford diff has a longer side than the other so you would have to end up cutting and welding it to same fitment?
Ok I’m stuck on this, will a factory s10 driveshaft and rear fit or work for a swap? I’m keeping the engine stock for the most part
I got a 9" from Quick Performance with new rear disks brakes, clutch type posi, 3.83 (ish) gears, new axels with the 5 on 4.75, centered with my specific length (no extra charge) etc. for about 2K shipped to the door. My numbers for the 8.8 swap would have been close tot he same BUT I can swap third members easier so i also got a third member with 4.56 ratio for racing. An option for those with out the skills or time.
I really dislike seeing those aluminum spacers for a drop kit. I recommend the metal ones and most fix the driveline angle change (Top is slopped 3 degrees?). My two cents, seen to many break/crack more so in high power or ruff road/off roading.
Notif SQUADD
What transmission did you end up doing because I’m using a power glide
Goat
The yoke out of the S10 fit the 4L60 because the S10’s had 4L60’s
You could say that the FORD (got) EXPLOREd ;)
Look for 96 and newer S-10 or Blazer with 4.3 and manual. They have bolt in 8.5" factory
Order has been placed
The funny part is Robbie said it’s giving “socal vibes” and I’m from socal and my s10 basically looks exactly like that wheel setup 😂
I think the rear end housing is not center on the ford 8.8. One axle housing is longer than the other. Looks like passenger is longer than driver. A lot of people shorting the longer side to match the shorter one. Then they buy 2 of the same side axles. If that makes sense? Lol anyway. Keep up the good work. Love the s10 content.
Hey man i wouldnt bore the holes if anything make some rear shackle brackets with bends in them and the front bushings should do fine on the other end , boring the hole seems like it may cause some issues down the road with the block wiggling loose ? Maybe .. hahaha i just work on cars and seems sketch! Hahaha
What Rims are those? Size? Bolt pattern?
Yay
What’s the rear wheel tire setup?
Lol those breaks sounds like a knife sharpening up or pulling out a sword
Hey I got a 97 explorer with the same rear end
Cool, wrong bolt pattern, offset rear (one side longer than other), almost the Ford rear you really want.
What junk yard is this that makes you wear safety vest?
What I'd love to see is a Volvo build one day, you know would be sick! This s10 build is gonna be hella sick, just like every other build you have, keep rocking Robbie!
S60R 👀
That’s my favorite Volvo ^
@@NovaZocket52 I had a V50 manual awd, had a blast with it while it ran😂
i definitely back this i vote a p1 aka s40,c30,v50
Robbie's fabrication GARAGE !
Jags that run has a setback pad for leafs
Robbie cuh tackuachiando in the LS10 love to see it
Wish we were in did you use out of the truck
Trokiando cuhhhh
How about u grind it down a little on the rear end that bolts on just that little to make it fit
I'd definitely keep the sway bar if you intend to drive the truck on the road much.
it was from the Explorer, The truck never had one!
It would be a major upgrade to have a rear sway bar no matter what the bar came off of. It really helps cornering stability in those old trucks!
bed mounted turbo???
Idk how I got this early but I'm not complaining.
Just for your knowledge its called ford EXPLORER not ExPLoDer😁
hahahahahahahahaha , Great video by the way
That year was the exploder because of the roll overs they were prone to that lead to fires
It's "exploder", everyone in the north (atleast around me) calls "explorers" "exploders".
@@vegas_the_trucker1595 Aha, now I feel dump haha.
Thanks for the info
I love the committed crew logo but a jacket or a shirt with a outline or cartoon of your car would be sick
1:21 is robbie saying ford explorer or ford exploder??😂😂
i also would love to see you join the volvo community i would love to see my favorite car guy on youtube join the swede speeds
Hey robbie just wanted to say it'd be better if u played different music during the cuts
When came's new EG videos
Love your videos
I like those rims on it
Me putting around the city in my BRZ with Brembo breaks... SQUEEEEEEEEEEEE
If i send a small sticker for the s10 will you put it on it
Hey robbie, if you want you should install fuel cell in the S10
I have heard of fuel cells but I’ve never known what they are/ what the do, could you explain?
Yee Robbie so cal af lol you just need a sunroof
Are those shackles on wrong looks weird?..
did you not watch the full video, This comment looks weird?..😂
Earlyy squaad
"In this episode, Robbie wraps his hand around a tiny little dinker."
😂
Widebody s10👍
I'm so jelly, wish I could mess around with cars trucks all day that I haven't a clue about 😅
300k 👀
Explorer❌ exploder📈
aye its chris
Yo I'm in to chevys all day. And all gm stuff.. buick/oldsmobile./caddy/ all the same stuff..... an I juss happen to come across your video an im liken what I see
any one know what wheels those are
New wheels for the truckie
The wheels look better on the s-10 then the genesis lol