🔥Takeda Stage 2 Intake Unboxing and Install on 2018 Accord Sport 2L Turbo🔥
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2019
- Just received the brand new Takeda Stage 2 Intake system for the 10th Gen Accord 2.0T. This video is the Unboxing and Install on Project Moonlight.
Video of all the good noises this intake makes will be coming soon!
If you guys have any install questions feel free to hit me up!
Visit cruxmoto.com for all your 10th gen Accord parts!
20% discount with code FAHRENHEIT
Follow me on IG: jdmdreamin - บันเทิง
Good video I really like the fact that it looks all clean and stock versus all the other mass flow air sensors I've seen where you can see the filter
Love the OE look of this intake, best one yet
You should just disconnect the MAF sensor cable and leave the sensor installed in the airbox until after you have everything removed from the car. Its far more protected than having it sitting in the engine bay still hooked up to the wiring harness. Once you have everything out you can swap the sensors over to the new intake.
Awesome, clean and definitive install. Going to order mine as well 👌🏽
very detail and clear, like that....
Yes looks really clean and looks like its a stock item under the engine bay, definitely would like to see a video of some revs and how it sounds while driving it 👍🏻👍🏻👍🏻 car is coming out looking sharp bro keep it going 🍺🍺
Thank You for Given Other out here - some Hints and Insight to a Simple Install as many little Items can and will Go Wrong - If You don't take Your Time . .
Further -= We Honda Owners need a Good " Intake Shoot Out " ~ there are least 3 Others that could be Tested ~ Company's should Pay You to Test Their Products ~
Sure their Product Vid's are Informative , but Only the Trained - Skilled Eye see's the Advances or Down Falls of these Products ~ I'm on Drive Accord & 2018 X Accord and will be Pointing those Out !
This intake is the only one that takes full advantage of that stock air inlet, and does it really well.
I feel like it has to be the one making the most gains. Until someone comes out with like a massive short ram with a similar cai box.
Makes the least power out of the PRL HVI, Mishimoto and Takeda. Actually loses power over stock. Dyno proven.
Installed this on my 1.5L last month. No complaints but AEM just came out with there product, which I also bought haha. If anyone is wanted a Takeda 1.5L intake with only under 100 miles on it, let me know!
tony darden - yeah it’s not bad. It’s a bit quite but it’ll do for now. I might get the injen intake unless AEM made one for the 2.0
I’m trying to record video of the intake and none of cameras can pick up the goodness. I’m sure people wanna hear how it sounds.
Henry Chi - The Takeda intake is $325 brand new.
@@henrychi5932 I've already sold it. Sold it for $220 on eBay but the AEM intake is better in my opinion. You can hear the turbo better.
Please post a follow on video demonstrating the new intake sound.
This is a cool build
Thanks man!
Love the clean install look. Do you think you will re-tune the car for the increase in air flow?
Rambro 88 - Yes for sure it’s getting a new tune. I’m upgrading the turbo to a CTR turbo so everything is getting touched again.
@@Fahrenheit_Motorsports how much does a CTR turbo cost? Inspired by your build
WithoutChase - I’m at $4000 and that’s sourcing parts when they were on sale or super cheap.
Turbo was the most expensive ($1500)
Downpipe
Intercooler
Ktuner
Intake
Adding an ethanol kit in the next month or so when the kit is released.
You said stalkers and groupies lol 😂 I can’t lol. Side note looks good 👍🏼👍🏼
It looks reallll good.
Are you OK I think you're on the wrong channel🤔🤣
i just tried to take out my stock air intake and broke 4/4 screwdriver removable press in screws. how'd yours come out so easily?
They come out easy unless there is dust or dirt stuck in the plastic channel. Then they are impossible to remove. I just took out the airbox to put in a Mishimoto airbox and I broke most of the clips 😂.
You can get a bag of 100 for $8 on eBay. Go that route bro.
Fahrenheit Motorsports so I’m not the only one😂 thanks for lmk where to get them I’m sure these won’t be the only ones I break
Looks pretty good, was hoping you give it some revs. Maybe next video.
Carlos Martinezz - Yeah I’m going to do a full review video of all the good noises that come out of this thing. I’ll need to shoot it on my camera tho. I only had my phone today.
Not vid jacking but I have a quick vid of my 1.5T Takeda driving with sound. I’m sure the 2.0T sounds better but it should give you an idea. But as mentioned, it sounds pretty damn good for being a closed system
Wayne Colwell - Did you film it windows up? And what did you record on (phone or camera) I made some adjustments to my setup but waiting on the battery to charge.
Fahrenheit Motorsports I did it with the windows down with my iPhone. It’s been so nice lately hard to keep the windows up haha
it doesn't do any sound at all believe me...took mine off and the car is even better sound/performance with the ome box
I have bought this unit for my 2.0t and remove it after 1 month. It's a nice all around intake but doesn't even ad any sound. I mean I was so disappointed for the price I paid...I had a Takeda on my 2.4L and man was it amazing!!Don't waste your money on this...
Good to know , thanks.
Any chance you will do a complete install on a BOV? I bought a Boomba BOV for my 18 Accord, and I’m having difficulty getting it installed. Any suggestions? Any plans for a video like this? Really could use the help. Great channel! My Takeda is coming in tomorrow!
I hadn’t planned on it because the stock recirculating system is super helpful. But, I could probably buy one and do an install video. Do you have a link by chance??
Thanks for watching brotha 🤙🏽
www.boombaracing.com/amp/honda-2-0-turbo-recirculating-bypass-valve-bpv-civic-type-r-accord-2-0t/
This is the one I bought simply because it was bolt on. The install videos they have on the website is for a Civic Type R. I found out the hard way that the engine bays are much different. I would just like some help getting to the BOV. There are a lot of parts to move. I plan on using your complete video here for the intake and can’t wait for that. But I didn’t see anything concerning BOVs. Let me know if you willing to do this or planning on it! Keep up the good work and thanks for the reply!
Let me check it out bro
Fahrenheit Motorsports Hey dude, just wondered if you got anywhere on the BOV? I still have mine. Debating whether to install or not. Thanks!
No bro I didn’t. The more I researched the more I leaned towards no. I saw a number of people complain of bad components that caused over boosting issues or faulty builds causing boost leaks. To much headache for something that only makes noise...
Where did you get that dope engine cover bro
Does this need a tune to be used or can u run it stock?
That engine bay is tight. Looks like an Audi engine bay with no room!
Hey bro I have a 2019 2.0t so far I installed a mishimoto short ram intake and a muffler delete. Would you recommend me to get a resonator delete or not?
Not really. You have two stock resonators so adding more won’t really do anything other than change the small amount of noise coming from the rear. If you went straight pipe and wanted to add those where the mufflers went for the look I could see it.
@@Fahrenheit_Motorsports so we're do I get that straight pipe? Well a muffler shop provide that? And what size?
Hoping for a test drive to hear that engine breath
can you please do a diy transmission fluid change? thanks
What performance numbers does this produce?
Hey man! I installed my Takeda on my 1.5T accord last weekend and broke all 4 of the “Christmas tree” clips/pins trying to get them in...they seemed too long and over sized. Did you used magic to get them in haha
I also installed this on my 1.5. Pain in the A trying to install those plastic clips. I used a razor blade and trimmed those plastic clips. Kinda made them skinnier.
Probably wasn't made for the 1.5t🤔
Wayne Colwell - Before I installed them I looked at the difference between stock and supplied plastic clips. After struggling with the first clip, I ended up cutting or snipping a portion of the Christmas tree off at the point and they all fit. Before that, it was a shitty to get them to fit. I think Takeda could have supplied better hardware or put just a little more thought into this system.
I just went to Honda and got new clips since I broke the factory ones...which reminds me time for a clip pulling tool
F.M. Yeah I thought about trimming them down and/or cutting them like a fool I tried shoving three of the four in with force and then had to mutilate them to get them out. I’ve spoken with AFE and waiting for a reply on why their hardware was no where near the size/length of the factory hardware
I was hoping for some Revs also, I wanted to her it pull in the Air!
miltate - Bro I’ve been trying to record the intake noise while driving for the last two days. Mounted my GoPro, my Sony camera in a number of configuration and I came up with shit. Intake is barely audible with windows up. When you have them down it sounds so good but all my cameras pick up moving air.
Tomorrow I’m going to do some rev’s and setup my camera on the side of the road and drive by to see if it catches the intake and throttle down (compression surge) noise.
So when this gets dirty, you have to disassemble half of the intake to get the filter out to clean it?
Yes which sucks. I also got rid of this intake after 40 days of ownership. Not for me...
Fahrenheit Motorsports what about it specifically didn’t you like. Literally just installed it. My car did not like it at first. Everything went crazy. Got warnings for all safety features, brake system, emissions, engine light. Then I took it for a test drive 3 mins or so and it felt fine. I turned the car off and on and all the warnings went away by themselves. Was super scary. Tomorrow I drive to work for 1 hour.
When I ran the intake I could feel the motor stumble on heavy acceleration. I never got any codes but as soon as I changed the intake to PRL the car felt strong with no hesitation.
Fahrenheit Motorsports dude I’m on the drive to work right now. I understand everything you are saying...pretty disappointed.
I have my tools In the car... I might take this shit off on my lunch break.
Was wondering If you should disconnect the battery before installation?
No it’s fine. The only electrical you’ll be messing with is the MAF sensor and while the car is off the sensor isn’t hot. You’ll be be okay brotha 🤙🏽
Is this intake legal to the state of California?
You should buy camera stand with a phone mount so you can work with both hands ( assuming you're using your phone) they're cheap on Amazon
T Ellison - Yeah i shot this with my phone. I didn’t have my camera battery so I was stuck using my phone. But the stand is on my list of things to buy. 👍🏼 Great suggestion man.
After installing the cold air intake did any warning or check engine light come on
No it’s a direct bolt on. Unless you forgot to plug something back in that would be the only reason why that would happen.
Do you hear and feel a difference with it on
Henry Chi all my warning came on! Freaked me out...
Paul Fearon what did you do when that happens ? I just installed mine and all the lights turned on.
do you know if any of these mods you've done can be done on the 1.5T?
I put the same intake on my 1.5 turbo accord. Cost around 380
Most of them can be done if not all of them.
I bought one for the 1.5t. Paid about $100 less than directly from them.
Really I like , how I buy it ?
Does that clear plastic circle come off so the turbo sounds louder?
Chrispena86 - Good Question. Not sure but I’ll mess around with it. If it does I’ll take it off.
Fahrenheit Motorsports what’s the update? Is the sound noticeable? I really like the look of it how the air is pointed directly to the filter. But I want that turbo sound
Chrispena86 - It’s glued on the box. You’d need to bash it out before mounting. Do you have a tune on your car?
Fahrenheit Motorsports im running Ktuner stage 2
Chrispena86 - Right on. I just added it back to my car. The intake is 50% louder with the tune. Lol
Is this like a SRI or a CAI or like a hybrid of both?
I would say hybrid. All the other intakes on the market are exposed filters making them short ram. This intake bolts directly to the core support and air is fed directly from the front of the car. So although you don’t have piping and a filter that sit in colder air, the incoming charged air is really only coming from non heat soaked areas.
Where did you get that red engine cover nice build
I made it brotha. I ordered wrinkle red paint and white sharpie paint pens. Then I went to work on the stock cover. 👌🏽
@@Fahrenheit_Motorsports looks great
Question. ? Does the sport 2.0 manual comes with LSD?
It does not. But you can fit the type r lsd in with very minor changes.
@@Fahrenheit_Motorsports not an option here.... I'll get the mazda 6 manual instead...
@@Fahrenheit_Motorsports I'm very thankful for the info.
Reasons on why your switching from k tuner to Hondata?
TheRealJordi - Going with a CTR turbo and Hondata tune. I realize you can use both but the tuner who’s going to help me used Hondata to tune another guys car with a CTR setup.
Thanks I want to get k tuner or Hondata but not sure what do you think? And sweat man curious to see what your power increase is after the ctr turbo and Hondata tune!
TheRealJordi - Personally I choose KTuner because of the price point and the tune. It pushes slightly more power then Hondata. But honestly they do the same thing so picking one over the other isn’t a bad thing. They both have solid reviews and a good following. I just liked that you got a touchscreen display with KTuner for less then hondata’s MSRP. Plus with KTuner you can utilize all 3 drive modes on stage 2. (Eco, Normal, Sport) where as Hondata you can only use Normal and Sport. There are times when I didn’t feel like boosting more then stock numbers so a simple press of the eco button restored me back to stock numbers until I was ready to push it hard again. I actually really miss the feeling of the car when it was max boost with quick spool and throttle responsiveness 2 checked off. The car was night and day fast and so much more responsive.
How hard is it to remove the filter when it’s time to clean the filter
Remove the 4 Christmas tree clips and unscrew the filter clamp. Filter is out 🍻
How did you remove that rubber grommet? I can’t get the damn thing off
I used a long screw driver. I’ll come out, just muscle that bitch 😂
Did you install your Trevor? If so... how do you feel about it?
Can you share the link where you bought this at.Thank you.
It was purchased through there website.
afepower.com/afe-power-56-70003r-takeda-stage-2-pro-5r-cold-air-intake-system
How often will the filter need to be replaced?
Sam Sabin - It’s an R5 reusable filter. Just wash, oil and run it. 🤙🏽
price and link please. Thanks
Why? Was this just for looks or power gains?
I definitely didn’t spend $350 for looks when people aren’t going to see the thing. They claim a minimum of 10-15 HP gain with the intake but it was never dyno proven.
put some teflon tape if i get lose in the future
Updates?
Any idea if this voids the warranty on the car?
thegame108 - it does not. However Honda has stated that if I attempt to claim a warranty on something that fails and they determine the fault was mine or a part I added caused the failures then they would deny the claim. So when you start adding parts to your car, make sure you follow directions or you could end up screwing your self out of free repairs.
The Magnuson-Moss Warranty Act makes it illegal for companies to void your warranty or deny coverage under the warranty simply because you used an aftermarket or recycled part. I copied this straight from the federal trade commission website.
randall bollinger - My man! Good researching 🤙🏽
How many more horses does it give you? You never gave out that info.
10 max. The best dollar for dollar improvement is a tune. I went with Ktuner.
How does it sound !?
YOUSEF ALFILFEL - I’m shooting some videos now brotha. With the windows down you can’t really hear it. Once the windows come down it sounds like the car has a huge turbo. I’ll post a video of the sweet sounds it makes later today or tomorrow. Just trying to get useable video at the moment.
I was thinking of getting an aE intake for my 1.5t accord but I’m not sure if that’s a good idea
I will say this. At first I was disappointed with the sound. I know it performs well but the sound is what I wanted. After installed the ktuner back to my car the intake is really loud. The additional boost is putting in work with the intake system plus my intake temps aren’t getting effected like an exposed filter setup. 🤙🏽
Fahrenheit Motorsports thanks bro I will most likely install a takeda intake system on my 1.5 thank you this video convinced me that I should too bro keep up the good work g😩😤
Where did you buy yours at?
I ordered it directly from Takeda. Preordered it in October.
Does this void any warranty?
It doesn't but keep your money,its not worth it!
How is the spool loudness now?
b3ar0fab - I’m setting up the camera now 😎
@@Fahrenheit_Motorsports 😎👊🏾
DOES IT MAKE A DIFERENCE IN PERFORMANCE??????????????????
I didn’t notice much improvement in performance. The sweet sweet turbo noises got louder but hard to tell on the performance fact. I will tell you Ktuner was the one add on I could feel 100%.
What brand catch can is that?
Amazon mishimoto clone. Literally exactly the same fit and finish including the internals.
@@Fahrenheit_Motorsports do you have a link?
Sound clips
skyghost - I tried to record some today with the windows down but my phone and camera only picked up wind noise. I plan on doing some drive bys tomorrow and strapping the GoPro somewhere I can pick up sound but shield from wind. When I recorded with the window up it was really hard to pick up the intake.
I'm sorry to sound harsh - but that red paint job did not turn out as expected - the whole thing looks jankey and half assed. Just go buy the red cover everybody else buys - the one from the Civic Type R factory unit.
Obviously it's what you want to do but I don't really see much of a difference Except for the style thats not really worth changing what you already had . Agassi if increase the performance alsi the noise or the sound being any different to me seems like a waste of money My opinion.
For non service techs newbs
Is this intake legal in a California?
No need to remove the wiring harness..
The wiring harness isn’t getting removed. Just moved to allow for additional space in a tight area.
@@Fahrenheit_Motorsports sorry you dont need to move harness, you can easily menoveour the lower part of the airbox out of the engine bay, afte removing the bolts.
Joshua dagaur - Do you have a video to show easy removal without moving the harness on 2.0? I’m providing a solution to an issue I see people having with the install down the road so covering all bases. Feel free to post a link to this video in this chat showing exactly how you remove it without moving the harness. Thanks man! 🤙🏽
No revs to hear how it sounds? Wtf
I shot another video and got some sounds. The Takeda intake isn’t very loud tho. 🤷🏽♂️
You should have buy a K&N its way better
john Hightower - What’s better about it? I contemplated getting one.
@@Fahrenheit_Motorsports first of all that looks better when you open the hood and besides K&N filters are known to be the best anyway.
john Hightower - Does it out perform the Takeda intake on the flow bench? How about keeping air intake temperatures lower by shielding from heat soak?
No revs of how it sounds? Come on...
There’s another video dedicated just for that. Check it out on the playlist and see if you like the sound.
Too bad this kit makes you lose power proven on Dyno results and doesn't change the sound at all. K/N is much better in my opinion
Agreed. I took this kit off a day later. No lies detected here 🤣
It’s illegal in California wtf
That sucks man
Video too long bruh
This air intake sucks watch a video of dyno actually losses 3-5HP
Yeah it’s terrible. I took it off two days after install 😂