two strokes work quite a bit differently - removing power via ignition and fueling changes has far different effects - and sadly not as simple effects.
So stoked that I found this video, I had been looking for live tuning for my Kx450. This video did a great job of explaining the options and features that GET’s products provide. Thank you much, very informative and helpful! 🤙🏼
Is it pre set and set ?or does it have motion sensors gyro sensor and angle sensors that changes on the fly?can you add rear wheel sensors that can tell the ecu is spinning?
@@denniswilder3014 Depends on the racing series. In usa no wheel speed sensors are allowed - which arent too useful when trying to compare rear to front wheel speed when most good starts the front tire doesnt spin for a long time. Accelerometers are used in some systems
This is a bit of a no brainer product if half serious. Helps when you get explaining, Honda Using, Kawasaki ,Suzuki on its 250. I had the factory edition Troy lee ktm 250 I disliked the traction control, it felt yeah ? I love your explanations The GET product line I never knew other than an ECU, you honestly have me on side with the GET brand. I got talked into vortex on 2022 YZ 125 yamaha, It got long Rod so much work head porting pipe got 37.8 on dyno It was a lot of money, to do was a little disapointed with Riding carricteristics that is why I wanted your build to sell this one ,to keep your build but unfortunately Tansport lost both.Had sent 2 motors 125 and a CR500 They would be very great full to have the promotional guidances and services, you are a Class Act honestly
OK, good info and I'm going to look into it further, but 1st, tell me what's going on with that wall behind you....... It looks like and exterior wall with some shelves bolted to it?
@@HPRaceDevelopment I didn't have anything different in mind, I'm thinking about adding a semi enclosed area off the back of my shop to do cleaning, painting etc.... and was just curious on what you'd done there.
@@rfair123 Thats an (now) interior wall - i wanted this look but i added this room to the side of my existing shop so not shown is a formerly exterior shop wall now a shared interior wall.
can you have both Map switch and WIFI connected the same time . specially on honda . i have WIFI get specially produced to connect to OEM honda . now if i connect get map switch to main connector . i can use hona original connector for WIFIcom !? . and what about Traction control unite !?
ANGLE, MOTION DRIVEN? GYROMETER? MODERN DESIGNS THAT WORK SMOOTH FROM "DUCATI/BMW? YAMAHA/KAWI/ HONDA SEEM TO GET IT HANDED TO THEM THESE DAYS? INERTIA/ANGLE SEEM TO PLAY HUGE HESE DAYS, NOT HE OLD SCHOOL ON-OFF CRAP, MODERN SYSTEMS / /
road racing uses far different concepts. Additionally most teams use the same ecu and traction control supplier. The secrets winning teams hold are special for short periods - and very impressive
Good to see you making videos again. Always learn something from your vids.
Will we see this tech for the new TBI 2strokes! Love the traction control!
two strokes work quite a bit differently - removing power via ignition and fueling changes has far different effects - and sadly not as simple effects.
@@HPRaceDevelopment Thanks for the response Derek! Bummer but makes sense.
@@rogerkelly4491 In the not so distant future bikes will be ride by wire, and really advanced traction control will exist, via throttling
@@HPRaceDevelopment 2 and 4 stroke or the E bikes? I imagine E for sure. I don't follow street stuff much but i imagine they are using this tech?
@@rogerkelly4491 I mean a throttle body that uses a servo, and computer controlling it. It’s what exists in your car and most sport bikes.
I have a GET on my 250f with Derek’s maps and they are a MUST! 🙏👍👍
So stoked that I found this video, I had been looking for live tuning for my Kx450. This video did a great job of explaining the options and features that GET’s products provide. Thank you much, very informative and helpful! 🤙🏼
Gotta bring my bike to you and have you guys tune it. I have a GET for my bike but never installed it.
Sounds good
Is it pre set and set ?or does it have motion sensors gyro sensor and angle sensors that changes on the fly?can you add rear wheel sensors that can tell the ecu is spinning?
@@denniswilder3014 Depends on the racing series. In usa no wheel speed sensors are allowed - which arent too useful when trying to compare rear to front wheel speed when most good starts the front tire doesnt spin for a long time.
Accelerometers are used in some systems
Great video thank you so much I have one of these I never installed it cuz I don't understand it lol🔥
This is a bit of a no brainer product if half serious. Helps when you get explaining, Honda Using, Kawasaki ,Suzuki on its 250. I had the factory edition Troy lee ktm 250 I disliked the traction control, it felt yeah ? I love your explanations The GET product line I never knew other than an ECU, you honestly have me on side with the GET brand. I got talked into vortex on 2022 YZ 125 yamaha, It got long Rod so much work head porting pipe got 37.8 on dyno It was a lot of money, to do was a little disapointed with Riding carricteristics that is why I wanted your build to sell this one ,to keep your build but unfortunately Tansport lost both.Had sent 2 motors 125 and a CR500
They would be very great full to have the promotional guidances and services, you are a Class Act honestly
OK, good info and I'm going to look into it further, but 1st, tell me what's going on with that wall behind you....... It looks like and exterior wall with some shelves bolted to it?
What should the wall be in your opinion
@@HPRaceDevelopment I didn't have anything different in mind, I'm thinking about adding a semi enclosed area off the back of my shop to do cleaning, painting etc.... and was just curious on what you'd done there.
@@rfair123 Thats an (now) interior wall - i wanted this look but i added this room to the side of my existing shop so not shown is a formerly exterior shop wall now a shared interior wall.
can you have both Map switch and WIFI connected the same time . specially on honda . i have WIFI get specially produced to connect to OEM honda . now if i connect get map switch to main connector . i can use hona original connector for WIFIcom !? . and what about Traction control unite !?
Nice
I hope you are ok I have emailed you twice with no response.
Sorry not sure which email it is
ANGLE, MOTION DRIVEN? GYROMETER? MODERN DESIGNS THAT WORK SMOOTH FROM "DUCATI/BMW? YAMAHA/KAWI/ HONDA SEEM TO GET IT HANDED TO THEM THESE DAYS? INERTIA/ANGLE SEEM TO PLAY HUGE HESE DAYS, NOT HE OLD SCHOOL ON-OFF CRAP, MODERN SYSTEMS
/
/
road racing uses far different concepts. Additionally most teams use the same ecu and traction control supplier. The secrets winning teams hold are special for short periods - and very impressive