My fuse blew trying to hook up the sterio thats just like yous can you please tell me how to hook up to test the unit to see if it comes on please?i was woundering what wire we use.
Use a car battery and connect it to the red and black (thicker) wires on the power supply (main) wiring harness. Just like he did in this video. Those are the only wires you need to connect to power the unit and test it. If you blow the onboard fuse (fuse on the back of the unit) , there is a short somewhere inside the unit or they got the plug pins wrong. Double check the pins on the power supply wiring harness to that of the manual. If all fails, just return it and get a new one.
@@setnfix Thanks for the reply man. Planning to connect as a backup for Wired Android Auto and didn't know if one was for Carplay and other for Android Auto.
I am getting a buzzing sound when the motor is on, do you have any suggestions to what is causing this? Both bluetooth and usb method buzz when motor is on.
It is due to the engine noise . It is normally not coming these kinds of car stereos. But it happens if you connect additional devices such as usb kits or Bluetooth kits. try this circuit th-cam.com/video/70eqsIG9Z2s/w-d-xo.html
@@tjj_bihh There are many reasons. But the most probable thing is the ground loop. Check the car stereo with a separate power supply. If the noise is same, there is an issue with the sound IC or Audio control IC.
My head unit keeps saying “please power on bt” when i want to connect Bluetooth then when i do put it on Still I can’t have Bluetooth pairing Even after powering on it keeps asking to power it on Do you perhaps know how to fix that I tried factory reseting and even upgrading firmware but no change
DO not go to sleep mode. IF your car battery dry out abnormally, check the wiring. I think ACC wire is connected to the battery directly or there may me a short.
Hello nice vid, but i think that with these videos you should leave the playback speed untouched. cause then it is clear how fast or slow the unit is. Very difficult to judge that now cause you sped the speed up. Regards
Hi! I have this type of carplay I have mine as fake i know this but I do have concerns. I did a soft reset/ Format the device at the android settings. And now every time I change the wallpaper and reboot it, it reverts back to standard wallpaper. Hoping you could help me out. 😅
Are you sure you've saved the changes? I noticed something on this device-it is better to stay in standby mode, which is under the settings. If you restart it, you'll see that it continuously updates apps, making the boot-up process take longer.
@@setnfixYes it saves. After I tried to format it wont save anymore whenever I reboot or The car play is completely removed from the battery supply it should save as it should be. I'll try to do your instructions given above and hope it works 😢
@@setnfix Hello, Do you have any alternative option I should do? It still wont save T_T.. Every time I restart the android head unit my wallpaper settings keeps resetting except for the boot logo and boot animation they are saved. I tried soft resetting still the same T_T
You can add a start up logo by copying any Logo you preferred as long as it has the same Resolution recommended and type of file should be "BMP (.bmp) " format
My unit is just like yours can you tell me how to turn the unit on so I can check to see if it comes on?what wires do you connect to the battery to turn it on?
Awesome vid, thanks. Got 2 questions though. 1/ what’s the difference between 4-pin and 6-pin USB ports ? 2/ any idea if a 2-to-1 USB adapter would allow me to use 3 USB devices (front camera / DAB+ / hard drive) ?
4 pins and 6pins both can be used as normal USB port. But 4 pin is used to connect with PC for firmware upgrades . If you use a USB hub, you can connect more USB devices.
Hey i have the rimoody 9 inch amdroid 13 8 core 4 gig headunit and i cant for the life of me find the logo settings. I emailed rimoody and got mothing any helpbwould be great.
This is android 9, however why is there not an android 11 version atleast with dark mode?? surely the 2gb can handle that. I'm very well aware of the fake specs of this MTK 8163
@@setnfix essgoo lies about specs . Ive been digging in the firmware its android 9 with 2gb ram. Mtk 8163 ONLY supports up to 2gb ram. Do your research
2 หลายเดือนก่อน
Friend, is it possible to change the color of the buttons on the screen?
Never actually installed it in a car, which was what I wanted to see......
You can find from my videos.
My fuse blew trying to hook up the sterio thats just like yous can you please tell me how to hook up to test the unit to see if it comes on please?i was woundering what wire we use.
Car fuse?. I think you have accidently connected the power wire with ground. 1st disconnect the battery. What is the issue with your car stereo?
Use a car battery and connect it to the red and black (thicker) wires on the power supply (main) wiring harness. Just like he did in this video. Those are the only wires you need to connect to power the unit and test it. If you blow the onboard fuse (fuse on the back of the unit) , there is a short somewhere inside the unit or they got the plug pins wrong. Double check the pins on the power supply wiring harness to that of the manual. If all fails, just return it and get a new one.
What is the difference in the 4 pin and 6 pin USB cable? Besides the number of pins? Do they have different uses?
Both can be used as USB port. But one is for connecting usb camera, Carplay and specially to connect with PC for Firmware upgrades.
@@setnfix Thanks for the reply man. Planning to connect as a backup for Wired Android Auto and didn't know if one was for Carplay and other for Android Auto.
I am getting a buzzing sound when the motor is on, do you have any suggestions to what is causing this? Both bluetooth and usb method buzz when motor is on.
It is due to the engine noise . It is normally not coming these kinds of car stereos. But it happens if you connect additional devices such as usb kits or Bluetooth kits. try this circuit th-cam.com/video/70eqsIG9Z2s/w-d-xo.html
@@setnfix you need a capacitor on the red wire to regulate the electrical flow. Don’t play with it, ask an electrician to do it for you.
Why is my CarPlay so laggy? Seems like the bass is so high for some reason, and songs are skipping through CarPlay pls help lmk
May be overheating, lack of RAM, Software issues. watch this for over heat issue th-cam.com/video/8wRAPySw7jw/w-d-xo.html
@@setnfixthat’s not it i keep hearing this static noise even if music isn’t playing how can i fix?
@@tjj_bihh There are many reasons. But the most probable thing is the ground loop. Check the car stereo with a separate power supply. If the noise is same, there is an issue with the sound IC or Audio control IC.
My head unit keeps saying “please power on bt” when i want to connect Bluetooth then when i do put it on
Still I can’t have Bluetooth pairing
Even after powering on it keeps asking to power it on
Do you perhaps know how to fix that
I tried factory reseting and even upgrading firmware but no change
Make it available for search
I got this one with CarPlay as well but there is No App like Zlink? How can I fix it? Hopefully u can help me ❤
Download the app from playstore
@@pmzz2283 Android auto logo app!
How did u install the backup camara and which wire or cable are in the back hardness of the radio for the camara?
Yes. use pink wire
Hello! How I can change the boot logo?
Check this video th-cam.com/video/D-CrU-82Rp8/w-d-xo.html
I have the same issue unit, but I can’t get my factory amp to turn on. I’m not getting no sound, it that a setting that I need to change??
I have a 2009 ram 1500 no sound
Under the settings, There is an option to activate the external amp
@@setnfix ok I will try that thanks
I have 2 questions, 1. How to change sleep mode. 2. Unit keeps draining my car battery, any advice?
DO not go to sleep mode. IF your car battery dry out abnormally, check the wiring. I think ACC wire is connected to the battery directly or there may me a short.
I have the same unit. but when listening to radio, the signal is not steady and is getting static, how to workaround?
Try with this booster th-cam.com/video/SPzkirYrjLs/w-d-xo.html
Hi. Im having issues connecting my amps. I dont see a remote wire. Is there something i could do?
Is it an old version?
@@setnfix it's the android 13 with 7 inch screen. Ford expedition 08
My Home Screen is different is it still android 13?
download cpu Z app and check
You can also check in the units settings which is far easier than the channel’s suggestion.
Hello nice vid, but i think that with these videos you should leave the playback speed untouched. cause then it is clear how fast or slow the unit is. Very difficult to judge that now cause you sped the speed up. Regards
I did not speed up in the important areas.
@@setnfix to me it is important to see if it lags when using the touchscreen etc. Looks speed up there. Regards
Hi! I have this type of carplay I have mine as fake i know this but I do have concerns. I did a soft reset/ Format the device at the android settings. And now every time I change the wallpaper and reboot it, it reverts back to standard wallpaper. Hoping you could help me out. 😅
Are you sure you've saved the changes? I noticed something on this device-it is better to stay in standby mode, which is under the settings. If you restart it, you'll see that it continuously updates apps, making the boot-up process take longer.
@@setnfixYes it saves. After I tried to format it wont save anymore whenever I reboot or The car play is completely removed from the battery supply it should save as it should be. I'll try to do your instructions given above and hope it works 😢
@@setnfix Hello, Do you have any alternative option I should do? It still wont save T_T.. Every time I restart the android head unit my wallpaper settings keeps resetting except for the boot logo and boot animation they are saved. I tried soft resetting still the same T_T
Hey I have this same stereo my problem is my car has a 20 pin power connector can you guide me how to connect all my wires
Watch this part th-cam.com/video/kxVo-lXwF3k/w-d-xo.html
Very Well done, But now i ask you, there is a New Firmware Update for alps 8227L Demo with android 13?
Update file is not released yet for public.
Can i connect rca subwoofer cables to this stereo head unit?
YEs you can
I have this the same android head unit but the themes icon is not available. Also, please create video on how to change startup logo. Thanks
You can add a start up logo by copying any Logo you preferred as long as it has the same Resolution recommended and type of file should be "BMP (.bmp) " format
My unit is just like yours can you tell me how to turn the unit on so I can check to see if it comes on?what wires do you connect to the battery to turn it on?
Awesome vid, thanks.
Got 2 questions though.
1/ what’s the difference between 4-pin and 6-pin USB ports ?
2/ any idea if a 2-to-1 USB adapter would allow me to use 3 USB devices (front camera / DAB+ / hard drive) ?
4 pins and 6pins both can be used as normal USB port. But 4 pin is used to connect with PC for firmware upgrades . If you use a USB hub, you can connect more USB devices.
Thanks for your fast and clear reply, it does help 👍🏻
hello how can i turn on amplifier on or subwofer on??
Use amp wire to power.
Hey i have the rimoody 9 inch amdroid 13 8 core 4 gig headunit and i cant for the life of me find the logo settings. I emailed rimoody and got mothing any helpbwould be great.
Did you check it under factory settings?
I did there's 3 passwords that bring up settings but none have the option to change logo
Good day po, pwede po ma connect Bluetooth speaker via Bluetooth po?
आप ब्लूटूथ ऐप पर जाकर स्पीकर कनेक्ट कर सकते हैं।
Can you please send me video on how to install it in peugeot 3008 2013 hikity radio
Then I need a peugeot car 😎
I hope you are joking…
This is android 9, however why is there not an android 11 version atleast with dark mode?? surely the 2gb can handle that. I'm very well aware of the fake specs of this MTK 8163
This is not android 9, its 13
@setnfix Its literally 9. I have the same headunit.
@@setnfix essgoo lies about specs . Ive been digging in the firmware its android 9 with 2gb ram. Mtk 8163 ONLY supports up to 2gb ram. Do your research
Friend, is it possible to change the color of the buttons on the screen?
Yes, but it is optional
Hello, do you know the password? Mine 8888 from the manual is not working. Regards
try 3667