Just trying to help out. It took me a bit of time to get numbers and cross reference and I still had a couple failures on my part when it got to the body shop. Thankfully my body shop is great to deal with and knew it was probably not cut and dry and they would need to do a bit of work for the project.
for the wheel wells i've seen people on the ChargerForums talking about getting mudflaps and cutting them to cover the gap, some leave the mudflaps normally but most i've seen also modify them to fit, hope this helped someone with that problem.
It took me roughly 2 weeks and a few phone calls to get all the parts cross referenced and be sure I had my parts list (which was still short 3 pieces).
Don't understand why you can't reuse the R/T belly pan. If the holes don't line up, can't you just drill new holes? Update: I also measured the holes on the bottom of the R/T belly pan and the holes on the bottom of the hellcat bumper and four of the six match up, so I don't think you actually need the new belly pan. Plus it's discontinued.......
The bumper cover is a different shape and goes farther out from the car. One could try, but I'm going to guess there won't be much to drill if it's to short. If time is not a concern it can be tried and if it don't work well the pan can be ordered later.
I just bought a 2013 Charger R/T, but I dont like the front bumper, it's like the regular one, I was wondering if one of those bumpers from the 2020 models can be installed on that 2013?..I want it to look nice...
Do all the parts fit? Like do the parts of a front bumper, rear bumper, and hood of a 2015 charger fit on all the other years (2015-2019) or is it 2015 charger parts for a 2015 charger? Thank you for responding to the other questions I had as well
So I bought the bumper based off the list that you provided and going to have an autobody install it on my RT next week. I was curious, was there any complications your autobody shop ran into when installing it? Also what is the difference between the stock RT and SRT wheel well?
Hey! I had a quick question, did you have to buy a new wiring harness to connect to the new fog lamps? or did you use the original one that came with the car?
Awesome, I need your help tho, I got all these parts, but I also got the brakes vent tubes that goes from the new bumper to the fender liner but the old fender liner have smaller cut out and it doesn't hold the tubes, what did you do there?
Your very welcome. Just a side note, for daily driving and dodging the occasional animals in the road, the brakes work perfect without the cooling. I have not noticed any adverse effects of loosing the extra cooling.
I got another question is the fog lights led or is they the yellowish halogen lights ? & I have a 2018 charger rt I’m in the process of swapping will that part number for the fog lights fit my car ?
I had a local body shop do all the work. Paint and install was roughly $1500... but I get a discount on labor due to the volume of personal, insurance, and referral work I push through them along with the amount of time i have been doing business there.
Was it at an extra cost? Just trying to estimate the entire cost before I start this process. And please excuse my grammar in the previous question, it was late when I was watching this. Lol
@@MrRikkoSuave yes it ads cost. I did the entire srt swap except for the inner wheel wells and it was $6,000. The front bumper and hood would be $3k-$4k if all done thru a body shop like I did. Ofcourse this all depends on the shop rate and where you get the parts.
I did not use tasca for my parts. I used them as an example to show the parts numbers and some prices. I have a few friends that have used tasca and steve white and both were good to deal with for them. I used a local dealership to get my parts from due to the fact I had no idea what I truly needed and didnt. Made returns easier. Lucky I only had to return 1 part that I did not need, but needed 5 that I didn't know about until the project started.
@@AVGJoesGarage Nice and thanks for the info, lol I just bought scat pack bumpers, side runners, and hood for pretty cheap... Now just need to either paint the parts or my car... XD
Got my front bumper kit and had some rivits and limited hardware...Is there a certain process of what to assemble first and what screws you will need....appreciate the video and any help you can give.
awesome, what about screws or brackets or washers or anything..need any of those or is it all included? Sorry just trying to get final list to purchase. Thanks!
No brackets to buy. As far as screws and such, my bill from the body shop does not include and hardware like nuts, bolts, washers, clips, plastic retainers, etc. They used what they could off my stock stuff. With that being said, you might need a screw or 2 and for sure you might want to get a few of the plastic retainers as I am missing a couple (the ones that the middle pops up and you pull the retainer out). But with that said this is as complete a list as I have and nothing is loose or falling off or vibrating. It's damn near factory.
I am not sure what screw they use. But it is a fairly generic screw for the car... its the same as they use to hold on the front plastic under the bumper.
Some of that stuff was reused from my stock parts. Other than that some of it must have came with parts as my invoice does not list any nuts, bolts, screws, fasteners, tabs or any other assorted hardware.
Hey you know how there are two types of dodge chargers front designs . I was wondering if you know if you can change the dodge front design that looks like a cross to this one you have in your video? .
AVG Joes Garage oh if it’s possible that would be great! I’m trying to buy a Dodge Charger but i mostly come across the ones with the bulky front design and the ones with the design you have are hard to find and more way more expensive. Anyways if you are saying you seen it be done I guess it is possible.. thanks for the reply
@@ucthekid-2359 I would only buy the fronts. The rears can be covered up my zl one addons mud flaps. They can be cut down if you don't want to see them and are fairly inexpensive. I really only recommend them if you want it perfect. The cost is not worth it to me.
Grab the part number from the description and drop it in google for the front bumper. For the hood, check out my hood video, get the part number from the description and drop it into Google.
That is a great question. Since I had it all done at a body shop I am not 100% sure. I was not charged for any clips, nuts, bolts etc on my invoice. When I picked up my parts my front and rear facias were still complete so they did not Rob parts for them. Wish I could be of more help since it's not really an answer. Just telling you what I paid for on my invoice.
I want to do the same conversion to my car. What did it cost to do the complete front, side and rear body kits and to have it all painted and installed
Your videos have been extremely helpful. I have a GT and I'm doing the conversion. So will all the existing hardware work. Tasca didn't give me any additional hardware.
You may need a clip or push lock pin here or there. My body shop did not charge me for anything small so I'm guessing most of what you need is already there.
@@roncox4949 if it is the part I think you are talking about it's either part of the upper grill package or the bumper. I don't see any part numbers listed in my invoice so I have to assume it's one of those 2 parts.
Do you know if the inversion you did will work on a GT AWD Plus model? Also do you have a full parts list to do the full conversion that you can post or send out?
Should work. Only issue might be inner wheel wells, but I didn't change mine and I'm ok with the slight amount they don't cover on the corners. Parts list are in each video description. That's the best list I have compiled.
The SRT bumpers flair out and not in like the non SRT bumpers. So there is a little triangle of plastic that is not covered in the front of the front wheel wheels and the rear of the rear wheel wells. At the largest I can maybe fit a quarter in the non covered area. If you would like pictures, I can get you some.
AVG Joes Garage sure! It doesn’t really sound like a real issue but a pic would help. And another thing, do you know if I can take the body (bumpers, grilles, side skirts, etc) directly from a srt and put them on my sxt?
@@angelreyes2273 should be able to pull the parts directly from a SRT car. I used the VIN of a SRT car to get the parts numbers. I will take a picture of the non covered part for you. I can email it to you or post it on IG, whichever works for you.
The bottom of the bumper at the wheel wells curves out on the SRT front and rear where the original parts curve in. This leave a small spot at the bottom front if the front wells and bottom rear of the rear wells uncovered by the inners wheel wells.
Really want to get the front bumper and hood for my RT. I see you said that you did this through your local dodge dealer. Is there a dealer online you recommend?
Just the front bumper coversion... it all depends on where you get parts and the labor rates of the body shop. I had roughly 1900 into just the bumper. it can he done cheaper, I used a local dodge dealer for parts.
I don't have one. I never kept the info since I was not buying them. But to get the part number, get a VIN for a scat pack or hell cat and call a dealership and ask for the price and part numbers or go online to a place like tasca Dodge and look up the parts or call the number on their website. My local dealer was very helpful when I told them what I was trying to accomplish.
Hey, the grille I ended up getting had an srt emblem outline. Did yours have that. If so, how did you get your dodge emblem to fit flush with the grille.
My body shop did all the work, but I will assume the dodge overlay just went on as they didn't say anything to me about it and it was the last part they had to get. The first one they got was a scat pack since they ordered it for the vin i have them and didn't use the part number I gave them.
I went through the local Dodge dealer/body shop. Do yourself a favor and get them online. Tasca and Steve white are Dodge dealerships that offer killer pricing
Awesome project I will be watching 👍
2 more parts planned.
It does look really slick, this is def going to help others down the road... Nicely done
Thank you my good man! I really do hope it helps. It was a lot of leg work to get it done. I think the time and money were well spent.
Holy shit thank you!!!! This was exactly what I was looking for. My front bumper was recently torn to shit and this just helped me out a lot.
Your welcome!
This is the best video out there on doing this! And thank you for telling people to please not up-badge!
Just trying to help out. It took me a bit of time to get numbers and cross reference and I still had a couple failures on my part when it got to the body shop. Thankfully my body shop is great to deal with and knew it was probably not cut and dry and they would need to do a bit of work for the project.
for the wheel wells i've seen people on the ChargerForums talking about getting mudflaps and cutting them to cover the gap, some leave the mudflaps normally but most i've seen also modify them to fit, hope this helped someone with that problem.
Good job showing the DYI for anyone putting this on
Thank you. Just trying to make someone's day easier.
This really helped me a lot. Was trying to figure out what parts are needed and your video went over every detail. Thank you!
Your welcome. Glad I was able to help.
I just did this swap, how did you make the fog lights work from older to newer style? Plug and play? Thanks
th-cam.com/video/V600QMmS-E0/w-d-xo.html
everything you need to know. have to swap the wires in the plug.
Great rundown!! That's crazy how much those wheelwells cost!!
They are almost twice the price of the non SRT wheel wells.
Very helpful. I know how time consuming it can be to find this stuff online.
It took me roughly 2 weeks and a few phone calls to get all the parts cross referenced and be sure I had my parts list (which was still short 3 pieces).
So does the list above include all the parts above or isnt it missing some?
Thanks for the info I was looking for this information for awhile couldn't fine the details anywhere!
Your welcome. It was a pain to get it all figured out. Figured I would make it easier for others.
Great video! Very informative and I love the look of the new bumper!
I am loving it as well. I'm glad I am able to put out some good info on a not well covered topic.
Don't understand why you can't reuse the R/T belly pan. If the holes don't line up, can't you just drill new holes? Update: I also measured the holes on the bottom of the R/T belly pan and the holes on the bottom of the hellcat bumper and four of the six match up, so I don't think you actually need the new belly pan. Plus it's discontinued.......
The bumper cover is a different shape and goes farther out from the car. One could try, but I'm going to guess there won't be much to drill if it's to short. If time is not a concern it can be tried and if it don't work well the pan can be ordered later.
Ahhhh so the width/depth is different
I wonder if this would work for a 2014
I know they can go on, but I don't know what else is required.
I just bought a 2013 Charger R/T, but I dont like the front bumper, it's like the regular one, I was wondering if one of those bumpers from the 2020 models can be installed on that 2013?..I want it to look nice...
I have seen it done. No idea what it takes to make it work.
Do all the parts fit? Like do the parts of a front bumper, rear bumper, and hood of a 2015 charger fit on all the other years (2015-2019) or is it 2015 charger parts for a 2015 charger? Thank you for responding to the other questions I had as well
All parts should be 2015-2019. The underpinnings of the car have not changed to my knowledge. So a 15 hood would fit a 19 and vise versa.
AVG Joes Garage I was just gonna get the parts for the exact year I have.
So I bought the bumper based off the list that you provided and going to have an autobody install it on my RT next week. I was curious, was there any complications your autobody shop ran into when installing it? Also what is the difference between the stock RT and SRT wheel well?
They had no issues installing it. The inner wheel well flares out to meet the bumper on the SRT version so the rt leaves a gap.
Ok awesome thanks for the fast reply and help!
Hey! I had a quick question, did you have to buy a new wiring harness to connect to the new fog lamps? or did you use the original one that came with the car?
Original. I have a video about what I had to do to get the new fog lights working.
@@AVGJoesGarage Perfect, i'm literally in the process of what you're doing right now so your whole video series helps so much! Thanks!
Hey Paul did you get the fog lights to work? Mine flash then stay off
@@ethancoffman8160 apparently you are supposed to flip the wires for the new fog lamps
It’s gonna look great! I wish the hellcat had fog lights.
I love the fogs. They are great!
Awesome, I need your help tho, I got all these parts, but I also got the brakes vent tubes that goes from the new bumper to the fender liner but the old fender liner have smaller cut out and it doesn't hold the tubes, what did you do there?
I didn't add the tubes so I have nothing to make work so i have done nothing. I was never worried about brake cooling.
@@AVGJoesGarage yes I might do the same then since I don't have brembo brakes on my R/T, ty for the fast reply!
Your very welcome.
Just a side note, for daily driving and dodging the occasional animals in the road, the brakes work perfect without the cooling. I have not noticed any adverse effects of loosing the extra cooling.
@@AVGJoesGarage perfect!
Hello I was wondering if u know what the plastic molding under the headlight is cause i cant find it anywhere?
That is a good question. I do not know. I think it comes with one of the other pieces, but I can not remember. Sorry.
Do the existing bumper come with the front belly pan or I got to have it for the new bumper ?
Requires the belly pan.
I got another question is the fog lights led or is they the yellowish halogen lights ? & I have a 2018 charger rt I’m in the process of swapping will that part number for the fog lights fit my car ?
@RyanFlexin mine are led. As long as the bumper is the dodge srt part, they should work. May require the bezels, I don't know.
@@AVGJoesGarage preciate it man!
FINALLY!!!!!! Your amazing bro!!! Thanks so much!!!!!!!
Would really appreciate a walk around video of your car completed.
yo yo th-cam.com/video/egGmR3-OMTg/w-d-xo.html
This is the best before and after walk around I have.
I know im late but do you know where you got your fog lights from
Bought them from a local Dodge dealership. All parts came from the same place.
@@AVGJoesGarage ok thank you ... found em 2 for 100
@@SrtJoe you found them online 2 for 100? May I have the link please that's a good deal!
Did you change it yourself or you took it to a shop if yes how much was the labor cost for installment
I had a local body shop do all the work. Paint and install was roughly $1500... but I get a discount on labor due to the volume of personal, insurance, and referral work I push through them along with the amount of time i have been doing business there.
Did your body shop part the parts? Or did they come paint already?
They do not come painted. Body shop painted them
Was it at an extra cost? Just trying to estimate the entire cost before I start this process. And please excuse my grammar in the previous question, it was late when I was watching this. Lol
@@MrRikkoSuave yes it ads cost. I did the entire srt swap except for the inner wheel wells and it was $6,000. The front bumper and hood would be $3k-$4k if all done thru a body shop like I did. Ofcourse this all depends on the shop rate and where you get the parts.
Hi! Looking to do this and rear bumper mods. What's your opinion on TASCA parts, I never used them and am wondering how was your experience with them.
I did not use tasca for my parts. I used them as an example to show the parts numbers and some prices. I have a few friends that have used tasca and steve white and both were good to deal with for them. I used a local dealership to get my parts from due to the fact I had no idea what I truly needed and didnt. Made returns easier. Lucky I only had to return 1 part that I did not need, but needed 5 that I didn't know about until the project started.
@@AVGJoesGarage Nice and thanks for the info, lol I just bought scat pack bumpers, side runners, and hood for pretty cheap... Now just need to either paint the parts or my car... XD
Got my front bumper kit and had some rivits and limited hardware...Is there a certain process of what to assemble first and what screws you will need....appreciate the video and any help you can give.
I do not know. I had my body shop do all the work. Sorry I can't help with the fine details.
I want the V6 charger to save on gas, but i love the grill on the srt. Can i just replace the grill without buying the srt bumper? Or it won't fit?
Great video it was hella helpful
Glad you found the info useful!
Did you get your bumper painted or do you have to to take it to your local shop? Thanks
Finesse Boi the body shop did all the paint work and installation.
AVG Joes Garage and how much did thay cost you all together?
So once you buy the fog lamps is it just a plug and play thing? or you need wiring harness etc.. I have the led fogs you have before the switch.
The wires have to be reversed in the plug on the car. Other than that it's plug and play. I have a video on swapping the wires in the plug.
Did you install all these parts your self or did you take it to a shop?
Shop
So does the list above include all the parts above for complete swap or isnt it missing some?
These are the parts to do only the front bumper, but it is a complete list.
awesome, what about screws or brackets or washers or anything..need any of those or is it all included? Sorry just trying to get final list to purchase. Thanks!
No brackets to buy. As far as screws and such, my bill from the body shop does not include and hardware like nuts, bolts, washers, clips, plastic retainers, etc. They used what they could off my stock stuff. With that being said, you might need a screw or 2 and for sure you might want to get a few of the plastic retainers as I am missing a couple (the ones that the middle pops up and you pull the retainer out). But with that said this is as complete a list as I have and nothing is loose or falling off or vibrating. It's damn near factory.
Will the front bumper fit a 2015 police?
The bumper will fit.
AVG Joes Garage last question can the grille fit my 2015 pursuit bumper or do I need
the hellcat bumper as well?
@@ignaciosanchez309 you will need the bumper for the grill, they are a match set.
looks sick
Thank you.
Do you know what type of screws I should get to hold the filler panel up?
I am not sure what screw they use. But it is a fairly generic screw for the car... its the same as they use to hold on the front plastic under the bumper.
Where did you get your screws and tabs to put all the pieces of the bumper and grille together?
Some of that stuff was reused from my stock parts. Other than that some of it must have came with parts as my invoice does not list any nuts, bolts, screws, fasteners, tabs or any other assorted hardware.
Part # to to the inner wheels wells please?
I don't have them.
Anyone else?
@@AVGJoesGarage 👍
Did you have the led fog lights on the stock bumper?
Yes
AVG Joes Garage thanks. Sorry I found that video after I commented.
@@MrTurbolag no problem. Thanks for watching.
Great video men 👌 Helps a lot I want the srt bumper 😎
I am glad this has helped you out! Thursday part 2 comes out. I will cover the hood and side skirts/molding.
Hey you know how there are two types of dodge chargers front designs . I was wondering if you know if you can change the dodge front design that looks like a cross to this one you have in your video? .
I have seen it done once. I have no idea what is involved in the swap tho.
AVG Joes Garage oh if it’s possible that would be great! I’m trying to buy a Dodge Charger but i mostly come across the ones with the bulky front design and the ones with the design you have are hard to find and more way more expensive. Anyways if you are saying you seen it be done I guess it is possible.. thanks for the reply
Big saver .
Love he look you’re going for!
As do I, love me the SRT look, just didn't need the extras or the power.
Can you tell that it’s missing that $1000 part????????
Most people would never notice the missing inner wheel wells. I notice it everyday. But it don't bother me.
Do you recommend buying it?
@@ucthekid-2359 I would only buy the fronts. The rears can be covered up my zl one addons mud flaps. They can be cut down if you don't want to see them and are fairly inexpensive.
I really only recommend them if you want it perfect. The cost is not worth it to me.
Can you leave me a link for the front bumper/hood?
Grab the part number from the description and drop it in google for the front bumper.
For the hood, check out my hood video, get the part number from the description and drop it into Google.
Thank you!
I have a 2016 Charger 5.7L R/T and doing all SRT body conversions. Did you have to get all new clips, nuts, bolts, etc for the SRT bumper?
That is a great question. Since I had it all done at a body shop I am not 100% sure. I was not charged for any clips, nuts, bolts etc on my invoice. When I picked up my parts my front and rear facias were still complete so they did not Rob parts for them. Wish I could be of more help since it's not really an answer. Just telling you what I paid for on my invoice.
What did you do with the previous bumper/hood? Did you keep them or sell them?
Sold the bumper, still have the hood.
Hey dude ... I have a 2008 dodge charger se and I want to convert the front bumper and the hood to a 2011 dodge charger.... please is this possible
I want to do the same conversion to my car. What did it cost to do the complete front, side and rear body kits and to have it all painted and installed
I have $6000 into everything. Can be done cheaper if you get all the parts and skip the body shop mark up.
Your videos have been extremely helpful. I have a GT and I'm doing the conversion. So will all the existing hardware work. Tasca didn't give me any additional hardware.
You may need a clip or push lock pin here or there. My body shop did not charge me for anything small so I'm guessing most of what you need is already there.
@@AVGJoesGarage awesome! Thank you!
Hey, I have a another question. What part is that black piece under the headlight apart of?
@@roncox4949 if it is the part I think you are talking about it's either part of the upper grill package or the bumper. I don't see any part numbers listed in my invoice so I have to assume it's one of those 2 parts.
@@AVGJoesGarage okay, thank you!
Do you know if the inversion you did will work on a GT AWD Plus model? Also do you have a full parts list to do the full conversion that you can post or send out?
Should work. Only issue might be inner wheel wells, but I didn't change mine and I'm ok with the slight amount they don't cover on the corners.
Parts list are in each video description. That's the best list I have compiled.
Did you get all your parts from them ?
Local dealership.
AVG Joes Garage how much did the front bumper cost because I am really wanting to do this
@@user-sx1up5oh2d around 2.3k. The fog lights are pricey and so are most of the parts.
hey, I'm looking to do this conversion, but can't find the lower support. is that the correct part number?
I did in fact make a typo in the description. I have it fixed with the correct number 68225538aa
I have a few questions about what exact parts you need for the conversion
The exact parts I used are listed in the description. Other than that, I used nothing else. I bought my parts from a local dealership.
nice, really considering on doing this to my sxt. what did you mean by "non-covered spot" when talking about the srt wheel wells
The SRT bumpers flair out and not in like the non SRT bumpers. So there is a little triangle of plastic that is not covered in the front of the front wheel wheels and the rear of the rear wheel wells. At the largest I can maybe fit a quarter in the non covered area. If you would like pictures, I can get you some.
AVG Joes Garage sure! It doesn’t really sound like a real issue but a pic would help. And another thing, do you know if I can take the body (bumpers, grilles, side skirts, etc) directly from a srt and put them on my sxt?
@@angelreyes2273 should be able to pull the parts directly from a SRT car. I used the VIN of a SRT car to get the parts numbers.
I will take a picture of the non covered part for you. I can email it to you or post it on IG, whichever works for you.
What’s not covered on the inner wheel well? Does it still fit but there’s a gap?
The bottom of the bumper at the wheel wells curves out on the SRT front and rear where the original parts curve in. This leave a small spot at the bottom front if the front wells and bottom rear of the rear wells uncovered by the inners wheel wells.
@@AVGJoesGarage i am looking for parts numbers cover wheel, because i dont want to have a small gap. Can you help me? koziolekkamil@wp.pl
What did you have to do for your fog lights to work ?
I have a video for that, show how to fix.
th-cam.com/video/V600QMmS-E0/w-d-xo.html
Really want to get the front bumper and hood for my RT. I see you said that you did this through your local dodge dealer. Is there a dealer online you recommend?
Tasca is a decent dealer I have heard. I personally have not ordered from a dealer online.
AVG Joes Garage ok thanks, so these are the part numbers that you used through your dodge dealership? Car looks great.
Ayoukenn yes these are the parts and Dodge part numbers. And thank you, I love it as well.
what kind of hood
Scat pack
Looks great 👍
Thank you sir!
Also how did the limited diff work out?
Have not done the diff yet.
I just bought this bumper I was wondering will the 2019 hellcat grille with the holes on the side fit?
Yes
James Kim yes it will
Great video 🔥🔥🔥♠️
Thanks!
How much is this conversion?
Just the front bumper coversion... it all depends on where you get parts and the labor rates of the body shop. I had roughly 1900 into just the bumper. it can he done cheaper, I used a local dodge dealer for parts.
Hey man could you send me the link to the wheel wells for the rt not the srt. I need new wheel wells
Or a part number would work
I don't have one. I never kept the info since I was not buying them. But to get the part number, get a VIN for a scat pack or hell cat and call a dealership and ask for the price and part numbers or go online to a place like tasca Dodge and look up the parts or call the number on their website. My local dealer was very helpful when I told them what I was trying to accomplish.
Would this also work with the 2019 grille with the snorkels?
It should. I have seen people swap the 19 grill into 15 to 18 models.
Hey, the grille I ended up getting had an srt emblem outline. Did yours have that. If so, how did you get your dodge emblem to fit flush with the grille.
My body shop did all the work, but I will assume the dodge overlay just went on as they didn't say anything to me about it and it was the last part they had to get. The first one they got was a scat pack since they ordered it for the vin i have them and didn't use the part number I gave them.
@@AVGJoesGarage okay, thank you!
@@roncox4949 I double checked mine, the cutout looks like srt but my dodge badge covers it perfectly.
@@AVGJoesGarage thanks for checking!
How much did this project cost you in total?
6k for the entire car.
AVG Joes Garage what about just to replace the front bumper ?
@@dennyboy3840 dont know for sure. The invoice is for the entire car. Guessing 2500.
What the website you ordered ur parts from
I went through the local Dodge dealer/body shop. Do yourself a favor and get them online. Tasca and Steve white are Dodge dealerships that offer killer pricing
AVG Joes Garage are you talking about Steve white motors in newton nc
AVG Joes Garage I live in Fayetteville nc
👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
If your going to use the fog lights like I did, make sure to check out my video on how to make them work.
AVG Joes Garage fog lights are a must here in the BayArea Ca.
Hood part number
th-cam.com/video/p1ieWq1DJR0/w-d-xo.html