@@kingclaytonz6027 thanks, turns out that it was on and that the only reason that they weren’t working is because I had to use LED lights instead of the standard halogen lights, thanks anyway.
I was all set to cut the wires, but remembered I could take the plug apart. Once I looked at the plug it was pretty easy. It does look good. It's funny cuz it's just a stock SRT Bumper, but man I love it.
I had all the stuff ready to cut the wires and make them weather tight. Then I thought what the heck, I'm gonna try this. Worked on the driver's side so I recorded the passenger side.
Useful... TIA. I swapped the SXT bumper with squat pack... was facing the same issue. Another question if m getting the HID and swapping with regular halogen headlamps. Will dey work
Very nice. I almost cut the wires. I didn't want to mess up the plugs. As it turns out it was not hard at all and it was quicker. I love the new look as well. Money well spent.
I just installed the SRT front bumper and hood on my 5.7 and I love it! Debating if I want to do the rear bumper and sides but super happy with how it turned out. Thanks for the awesome advice brother!
Hey, first of all thanks for the video. I have a Charger built in 21. The problem with mine is that the fog lights come on for 1 second and then immediately go off again. In the cockpit the display is on. Could this be the same problem here? Just swap the cables? Thanks for your help
@DJIROQ1 easiest was to find out is to run a couple jumper wires from the plug to the light. Then you can reverse them quickly and see if it works. That is how I found my issue. Once I knew what it was then I re pinned the connector for the permanent fix. Not 100% sure if this is the same issue, but its worth testing out.
i don’t even know if you’ll respond bro but when i have a 2018 dodge chart RT looking to swap the front bumper with a SRT hellcat style front bumper. QUESTION: which fog lights should i purchase and will everything be smooth when switching the two bumpers ?
@@AVGJoesGaragethank you so much for responding! i found the video were you put up the fog light parts. i will say i have fog lights on my dodge charger rt 2018. if i don’t want fog lights can i just not install them ?
So I got mine on, and they were working find and today I noticed they were off checked the wiring and nothing was loose, any ideas? Tried looking for the fog lamp fuze but couldnt find nothing on it
@@3silver4beast59 you need a test light or volt meter to test with. Once you have one of those you unplug the plug and put the tester ends in each terminal on the plug (with the lights on) and see if you have 12 volts or a light lit up.
I don't have any experience with models before 15. But if the plug does not match, I would assume you will need to get the connector for h11 and wire it in.
@@AVGJoesGarage hey man so I just followed those steps , my lights turn on then off any help ? I posted a video on my page, I did leave them un plugged for a while so maybe a new fuse idk
@@ethancoffman8160 watched the video and that is really weird. Do you have a multimeter? If so what is the voltage at the plug? Still have stock rt fogs? Could flip the plug back and see if they work. I can't remember is these are 5 volt or 12 volt lights, but if they are 12 could try running one right off the battery and see if it stays lit. The lights are controlled by computer so if both stock and those lights don't work it could be the module. Sorry I don't have a concrete answer.
Other than the grills and what u want to do with the fog light holes, there is nothing. Keep a watch out, I'm recording the videos for what all is needed with parts numbers.
Thursday I will have the first video up. It will be the front bumper and related parts. That will be followed by the hood, then side molding and rear bumper.
Dennis Wallace scheduled for 4pm Eastern time. Complete with part numbers and there are prices listed, but might not be the best prices available. Will give you and idea of prices.
The light and wires I figured out by running wires from another 12v battery and switching them around when it didn't work. The plug deal I learned in school but never had to do it since then. I was nervous I was gonna trash the plug. Glad I didn't. Lol.
Unfortunately I have no idea. Try doing jumpers and going back to the stock light and see if it works of if it flashes. If the stock light works I would say it might be a light or both lights. If the stock light flashes it's something else, I don't know what it would be tho.
Question after doing the bumper swap did your front side markers not come on as well? Mine aren't I figured after I switch these fog light wires they will come back on is that correct?
Finesse Boi local Dodge dealer that my body shop uses. I paid to much. Check out my videos that break down the parts needed, there are prices as well, but might be better prices out there. th-cam.com/video/kwZDhmd3gRs/w-d-xo.html
Man you are magnificent 🙏🏻, I'm considering doing this to my RT but i wanna ask for your advice first. it's either going with genuine parts (bumpers) and pay too much money or save some cash and go with lesser quality Chinese made bumpers since it is not a mechanical parts and there's no worries of being dysfunctional. Please enlighten me from all aspects since i'm not an American resident and it is harder for me to find a good deal on them
The choice is yours. I know none of the aftermarket rear bumpers come with the one filler panel that's need to make the bottom tight. I'm not sure what the front bumper kits might be lacking, but if they lack anything, you can look at my videos and see what parts you might need. I hope that helps you out.
God bless you. Literally spent the last 2 weeks trying to figure out what’s wrong. Bought 3 fog sets thinking it’s either that or wire harness.
It was a fun one to find. Glad I did.
You'll need an Automotive Tazer to actually get them working. It's a function that turns your fog lights on after a conversion
I have a tazer, what do I need to do to it to get them working
@@thomasdenha6892 You gotta go through the list until you see fog lights and switch it to on. Make sure ots updated first
@@kingclaytonz6027 thanks, turns out that it was on and that the only reason that they weren’t working is because I had to use LED lights instead of the standard halogen lights, thanks anyway.
Thanks man, I just did a RT SRT bumper swap and I was like dam my fog like don’t work. Just did your trick and there hood now. Thanks a million.🎉
Bruhh this is the best video. Straight to the point no extra talking. Thank you!!
Your very welcome
Useful... TIA. I swapped the SXT bumper with squat pack... was facing the same issue.
Nice little fix! Front is looking sharp man
I was all set to cut the wires, but remembered I could take the plug apart. Once I looked at the plug it was pretty easy.
It does look good. It's funny cuz it's just a stock SRT Bumper, but man I love it.
Looking good!! Awesome that you figured out the fix without cutting any wires!
I had all the stuff ready to cut the wires and make them weather tight. Then I thought what the heck, I'm gonna try this. Worked on the driver's side so I recorded the passenger side.
Useful... TIA. I swapped the SXT bumper with squat pack... was facing the same issue. Another question if m getting the HID and swapping with regular halogen headlamps. Will dey work
@jbhaulers no idea, but I'm going to guess they won't without some parts.
Great fix! It’s nice you can swap the connectors with out cutting the wires! I absolutely love the new bumper!
Very nice. I almost cut the wires. I didn't want to mess up the plugs. As it turns out it was not hard at all and it was quicker.
I love the new look as well. Money well spent.
AVG Joes Garage yeah that's the nice thing about new plugs is that you can do that! I would also say it is money well spent!
This worked like a charmmm🔥🔥 💯 thank you !!!
Question: Can the foglight brackets and fog light be installed while the bumper is on the car, or do you have to remove the bunper to install ?
As far as I know it can be done with the bumper on the car.
I just installed the SRT front bumper and hood on my 5.7 and I love it! Debating if I want to do the rear bumper and sides but super happy with how it turned out. Thanks for the awesome advice brother!
I'm glad I was able to help you out!
Hey, first of all thanks for the video. I have a Charger built in 21. The problem with mine is that the fog lights come on for 1 second and then immediately go off again. In the cockpit the display is on. Could this be the same problem here? Just swap the cables? Thanks for your help
@DJIROQ1 easiest was to find out is to run a couple jumper wires from the plug to the light. Then you can reverse them quickly and see if it works. That is how I found my issue. Once I knew what it was then I re pinned the connector for the permanent fix.
Not 100% sure if this is the same issue, but its worth testing out.
thank you so much 😊
is this trick specific only to your year charger or will this apply to older year chargers like a 2014
just did swap and couldnt figure it out thanks man
It took me a couple weeks to figure out wtf was going on. Glad I was able to help.
i don’t even know if you’ll respond bro but when i have a 2018 dodge chart RT looking to swap the front bumper with a SRT hellcat style front bumper.
QUESTION: which fog lights should i purchase and will everything be smooth when switching the two bumpers ?
Look on my channel. I have all of the parts laid out with part numbers.
@@AVGJoesGaragethank you so much for responding! i found the video were you put up the fog light parts. i will say i have fog lights on my dodge charger rt 2018. if i don’t want fog lights can i just not install them ?
@nija.. I do believe there is a filler you can use instead of a light if you don't want the lights. Not sure if the part number tho.
@@AVGJoesGaragethank you i found one that fits the srt bumper style. i might just buy the filler instead. thank you so much !
Front looking really good man.
Thank you! I love the new look. It draws a lot of attention.
A genius a genius
Si basically you just flip the cables rigth?
Yes.
Did you have to do both fog lights or just the passenger? Both fog lights reverse polarity?
Both sides need reversed and I had to do both sides
@@AVGJoesGarage do have to do same with V6 Charger..
@@shawndigg79 I would assume so
So I got mine on, and they were working find and today I noticed they were off checked the wiring and nothing was loose, any ideas? Tried looking for the fog lamp fuze but couldnt find nothing on it
Only thing I got is check and see if you have power at the plugs. Its weird they worked then quit working.
How can I do that?
@@3silver4beast59 you need a test light or volt meter to test with. Once you have one of those you unplug the plug and put the tester ends in each terminal on the plug (with the lights on) and see if you have 12 volts or a light lit up.
Ever find out ?
I did the srt bumper conversion on my rt 2014 but my fog light don’t fit do I need a pigtail the bumper is 2504 but the light socket is h11
I don't have any experience with models before 15. But if the plug does not match, I would assume you will need to get the connector for h11 and wire it in.
I don’t see the plastic piece to take off the cap
Hey man , you just earn a subscription, great video straight to detail, super impressed man thank you so much
Your welcome.
@@AVGJoesGarage hey man so I just followed those steps , my lights turn on then off any help ? I posted a video on my page, I did leave them un plugged for a while so maybe a new fuse idk
@@ethancoffman8160 watched the video and that is really weird. Do you have a multimeter? If so what is the voltage at the plug? Still have stock rt fogs? Could flip the plug back and see if they work. I can't remember is these are 5 volt or 12 volt lights, but if they are 12 could try running one right off the battery and see if it stays lit. The lights are controlled by computer so if both stock and those lights don't work it could be the module.
Sorry I don't have a concrete answer.
Charger looking good and nice fix.
Thank you. I'm glad I didn't have to cut the wires.
Are you able to do a direct bumper swap or is there more involved with what's behind the bumper?
Other than the grills and what u want to do with the fog light holes, there is nothing. Keep a watch out, I'm recording the videos for what all is needed with parts numbers.
AVG Joes Garage when are you going to do this video? I’ve been wondering the same. What all do I need to do the bumper and hood swap?
Thursday I will have the first video up. It will be the front bumper and related parts. That will be followed by the hood, then side molding and rear bumper.
you still planning to have the video up today? I am anxious to see it.
Dennis Wallace scheduled for 4pm Eastern time. Complete with part numbers and there are prices listed, but might not be the best prices available. Will give you and idea of prices.
How the heck did you find this little tidbit? Man, you just saved yourself some nice coin.
The light and wires I figured out by running wires from another 12v battery and switching them around when it didn't work. The plug deal I learned in school but never had to do it since then. I was nervous I was gonna trash the plug. Glad I didn't. Lol.
So you replaced the front grill as well? Been looking to do that on mine
The bumper requires the new grill. The crosshair grill don't fit.
Thank you so much, your video is really helped me
Your welcome
so you had rectangular fog lights before? and you went to eliptical? im doing a bumper conversion too and i need to buy fog lights
Correct. I wanted to keep the fog lights. I have zero regrets with the elliptical lights once I figured out the wire polarity issue.
AVG Joes Garage so you took the wires out from the connector, switched it then placed them back in
AVG Joes Garage okay thanks
@@mythicmagic6413 correct. Removed the pins from the plugs and put them back in the opposite of what they were
@Mythic magic did this work I have rt Charger and switched to srt bumper and my fog lights aren’t workin
i’m wondering can i swap the front bumper of a new charger (2015+) onto my 6th gen srt8
No idea. It probably can be done, but I have no clue what parts it takes.
Where did you purchase the front bumper with the fog lights .
Anthony Lambert Dodge. All parts are from dodge.
Good work man! Great how to on them fog lights.
Thank you. I was scratching my head a couple days on this one.
When looking for parts I couldn't find the fog lights
www.moparpart.com/oem-parts/mopar-lamp-front-fog-68228884ac
@@AVGJoesGarage thanks bro
@@aaronferguson47 no problem. I saw I made a typo in my other video so I corrected it. Thanks for asking so it made me find the error and fix it.
@@AVGJoesGarage your welcome brother
I did everything on the video but the fog lights just do like 3 flashes and turn off what could it be?
Unfortunately I have no idea. Try doing jumpers and going back to the stock light and see if it works of if it flashes. If the stock light works I would say it might be a light or both lights. If the stock light flashes it's something else, I don't know what it would be tho.
ALEX MAN ME TOO DID YOU FIGURE IT OUT ?
Bro I need help haha
@@ethancoffman8160 I think it was the lights cuz I had some extra ones tried them and they work perfectly
@@alexismarquez7984 so you got more lights bulbs and they worked fine because i did and mine are still not working
Question after doing the bumper swap did your front side markers not come on as well? Mine aren't I figured after I switch these fog light wires they will come back on is that correct?
It was only my fogs that didn't work.
How they working still??
Any problems?
Tristan Winter zero issues. Use them every morning on the way to work.
Were did you get the hood and bumper from? And how much was it ?
Finesse Boi local Dodge dealer that my body shop uses. I paid to much. Check out my videos that break down the parts needed, there are prices as well, but might be better prices out there.
th-cam.com/video/kwZDhmd3gRs/w-d-xo.html
Man you are magnificent 🙏🏻, I'm considering doing this to my RT but i wanna ask for your advice first. it's either going with genuine parts (bumpers) and pay too much money or save some cash and go with lesser quality Chinese made bumpers since it is not a mechanical parts and there's no worries of being dysfunctional. Please enlighten me from all aspects since i'm not an American resident and it is harder for me to find a good deal on them
The choice is yours. I know none of the aftermarket rear bumpers come with the one filler panel that's need to make the bottom tight. I'm not sure what the front bumper kits might be lacking, but if they lack anything, you can look at my videos and see what parts you might need.
I hope that helps you out.
Good to know.
Anything to save a buck.
I did the wire flip it’s flickering and turning off
That’s how mine is right now, did you ever fix it, and if so how did you do it
Where did you get the bumper and hood from ?
Local Dodge dealership.
Thank you sir you the best
If u get led bulbs you don't have to swap the wire
I had to swap and went from oem led to oem led. Are you talking aftermarket? Or could it be newer models?
@AVG Joes Garage my cousin got 2015 rt and we didn't have to swap the wire with led bulb aftermarket. Oem is different then. Good to know. Thanks
Great job and great video. 👍🏻
Thank you. I'm glad I got them working. I was missing my fogs. Wanted to share so someone else might not have to hunt so long for the answers.
Cool man. Nice fix
Thank you. My college is paying off... Well maybe not, but it did teach me how to pull a weather pack plug apart. Lol
AVG Joes Garage it got you to teach us something about cars
eunit08 if it helps one person then i am thrilled.
AVG Joes Garage each one teach one. Im impressed tho
Ohhhhh okay!
Guys super easy
Thanks soo much
Your very welcome. Glad I could help.
You could always do a fog light delete and make it look like a hellcat... Also You can ask "d dot ford" on Instagram he did an SRT conversion
RT Jake they are working fine. This was just an issue and the how to fix it.
Use grills instead it looks better
But not as bright at night.
That’s a sly little fix!
For sure. All those Auto tech classes from 20yrs ago are paying off. Lol