Thanks. It's always helpful when someone takes the time to make a record of how to pull apart body panels and other mysterious coverings. This helped me in replacing my transmission shifter cable.
yes!!! I've done the door handle parts the same, and I painted the chrome around my vents red, also the shifter insert (it started to flake and make my hand itch.. the whole reason I've done what I've done) but never knew how to to get this f 'er out! awesome! Thank you!!!
David Negron you have to take the vent pieces out. Grab a flashlight and Use a tiny flathead, there are three clip style pieces in each. Its a real pain, but do able. You have to lift one at a time on the inside of the vent, turn it, and so forth. It will start to come out. Hold onto it and continue working it. Once you get one out you'll see how they come apart. Also sanding the chrome down is a huge battle. But best wishes!!
So the white plastic rod that slides up and down and locks the ahifter in place . It moves but very hard wouldnt lock in and couldnt get key out. Now trying to fix what exactly needs done to get my shifter button to work again
Yooo can u fix the shifter with doing this ??? I think my shifter cable unplugged it was in reverse and doesn’t come out of reverse even if I move it to drive ?
Pls my little daughter mistakenly poured bottle water btw the gear am wondering if that could have any effect on the car. Pls help my engine light came up after that incident
On the driver door you have two TORX bit screws under the little black pad, peel back that rubber pad with a flat head to reveal them. Then remove them and the panel should pop out. Depending on your model you will have many electrical connectors (4 or 5) to unplug. Go ahead and unplug those and it should come out without an issue. For the passenger doors, the panels just pop right off. Starting at an edge, use a flathead and gently/evenly apply pressure and they should pop right off. If you need any more assistance feel free to email me at alrightletsgo92@gmail.com . Thank you for watching!
sorry for the late response, the letters are an insert. once you remove the trim panel you will be able to see how those come out. If i remember correctly they actually just sit below the part that i painted red. they dont actually mount to it.
fortworth07 yes, all of my sources state that it's located under the console. I believe you emailed me, so I will reply to you there as much as I can. (:
just in worried that my pieces are sort of gunnky a Lil bit like my passenger sides. so if I go ahead and just take them off and straight up prime them instead of sanding first just to avoid the work cause I don't want to buy a sander and don't want to sand by hand. the sander is because I don't want to spend too much money and obviously I think sanding by hand would take long.... so if I just went primer. paint . clear coat. would I be ok ???
David Negron I would sand them, but I don't know how bad the gunk is. I cleaned mine with rubbing alcohol (I didn't sand them), then primed, then painted.
someone at a carwash was able to clean the center one for me one time. I didn't know what he used. but it was like grayish blackish gunk . very flat on the surface so maybe that's what it was. maybe alcohol. so ill probably do that. alcohol. sand.prime.paint.clear. should do it. and any tips on if I wanted to do any underglows under the driver side and under the passenger glove box... any tips in going to re do a lot of my car. stereo too. just im worried about how I would wire that one lol
David Negron stereo is very simple. I think there's a video to do it. Just hit me up if you have problems and I can help you. You'll want a double din for sure. It'll make your life much easier haha
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
Thanks. It's always helpful when someone takes the time to make a record of how to pull apart body panels and other mysterious coverings. This helped me in replacing my transmission shifter cable.
I’m not sure if even I comment once a year on TH-cam but here I am to tell you THANK YOU!!
I dropped my gold chain down the cup holder hole so thank you for helping with this video. I’ll take the console off first thing tomorrow!
I did the same thing lol. Just not gold I’m not baller enough
yes!!! I've done the door handle parts the same, and I painted the chrome around my vents red, also the shifter insert (it started to flake and make my hand itch.. the whole reason I've done what I've done) but never knew how to to get this f 'er out! awesome! Thank you!!!
reid chandler how did you get the chrome part off on the vents? I want to do that with doing the door handles too maybe...
David Negron you have to take the vent pieces out. Grab a flashlight and Use a tiny flathead, there are three clip style pieces in each. Its a real pain, but do able. You have to lift one at a time on the inside of the vent, turn it, and so forth. It will start to come out. Hold onto it and continue working it. Once you get one out you'll see how they come apart. Also sanding the chrome down is a huge battle. But best wishes!!
Thank you. Very helpful and your humble narration made it, dare I say, enjoyable. Haha. Much success and may none of your bolts be difficult.
thank you. this is very helpful for an impulsive project i just thought of (adding an excessively loud sound system)
So the white plastic rod that slides up and down and locks the ahifter in place . It moves but very hard wouldnt lock in and couldnt get key out. Now trying to fix what exactly needs done to get my shifter button to work again
Yooo can u fix the shifter with doing this ??? I think my shifter cable unplugged it was in reverse and doesn’t come out of reverse even if I move it to drive ?
Thank you for the video , I replaced my cigarette lighter with a USB charger
Hey where is the shift unlock over ride for these types of G6’s??
3:00
How do to replace the shift knob or how do you know what type of shift knob to get?
Whats the space infront the shift gear called,trying to put the cover that came of of there back
Pls my little daughter mistakenly poured bottle water btw the gear am wondering if that could have any effect on the car. Pls help my engine light came up after that incident
Is this the same for the coupe?
How do you remove the trim on the inside part of the doors that are red?
On the driver door you have two TORX bit screws under the little black pad, peel back that rubber pad with a flat head to reveal them. Then remove them and the panel should pop out. Depending on your model you will have many electrical connectors (4 or 5) to unplug. Go ahead and unplug those and it should come out without an issue.
For the passenger doors, the panels just pop right off. Starting at an edge, use a flathead and gently/evenly apply pressure and they should pop right off. If you need any more assistance feel free to email me at alrightletsgo92@gmail.com . Thank you for watching!
This video has been so helpful! thanks!
I am trying to replace the shifter cable as a whole I can't get it past the AC vent.. any way to take it they?
Did you ever find out how to change the shifter cable cause that's what I'm about to do?!
Same about to do that
My gear shifter light isn’t working is there a bulb or is it a fuse??
I’m having the same problem with my gear shifter light as well. Does anyone know what bulb is in the shifter?
Did you remove the lettering for the center trim before painting? If so, how??
sorry for the late response, the letters are an insert. once you remove the trim panel you will be able to see how those come out. If i remember correctly they actually just sit below the part that i painted red. they dont actually mount to it.
is the Airbag control module under the console?
fortworth07 yes, all of my sources state that it's located under the console. I believe you emailed me, so I will reply to you there as much as I can. (:
do you know how to remove panel around instrument cluster?
how to change the knob of the gear lever thanks
the dreaded 10mm. great video thanks!
Always missing a 10mm ☠️👌🏼
How did you remove the ones from the door?
You should make a video over it
do you have a video of going through the process of your painting and what not ?
David Negron I'm sorry, but I do not, whatcha need to know??
just in worried that my pieces are sort of gunnky a Lil bit like my passenger sides. so if I go ahead and just take them off and straight up prime them instead of sanding first just to avoid the work cause I don't want to buy a sander and don't want to sand by hand. the sander is because I don't want to spend too much money and obviously I think sanding by hand would take long.... so if I just went primer. paint . clear coat. would I be ok ???
David Negron I would sand them, but I don't know how bad the gunk is. I cleaned mine with rubbing alcohol (I didn't sand them), then primed, then painted.
someone at a carwash was able to clean the center one for me one time. I didn't know what he used. but it was like grayish blackish gunk . very flat on the surface so maybe that's what it was. maybe alcohol. so ill probably do that. alcohol. sand.prime.paint.clear. should do it. and any tips on if I wanted to do any underglows under the driver side and under the passenger glove box... any tips in going to re do a lot of my car. stereo too. just im worried about how I would wire that one lol
David Negron stereo is very simple. I think there's a video to do it. Just hit me up if you have problems and I can help you. You'll want a double din for sure. It'll make your life much easier haha
There’s gotta be an easier way....
tried this, couldnt get it off. You gotta show us man
Figure it out genius