How to Install LED Rear Reflectors (2017 Honda CRV)
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- This is a tutorial on how to install rear LED reflectors (on my 2017 Honda CRV). The method is pretty much the same for all cars but you'll have to figure out how to swap out the reflectors and get to the taillights. Let me know what you think of the reflectors down in the comments below :)
-----------------------------------------------------------------------------------------
Instagram:
@_anthonymo
-----------------------------------------------------------------------------------------
USA
***CRV LED Reflector Styles***:
**Video Style**: ebay.us/Kw5Qud
Alternative Style A: ebay.us/hTuuaC
Alternative Style B:ebay.us/T4ZtHV
Alternative Style C:ebay.us/u6KerA
***120 Pcs T-Tap Wire Connectors***: amzn.to/2W9COGb
***Fuse Tester (2 pack)***: amzn.to/3mdbbXZ
***Masking Tape (6 pack)***: amzn.to/37Y4eBz
-----------------------------------------------------------------------------------------
CANADA
***CRV LED Reflector Styles***:
**Video Style**: ebay.us/Kw5Qud
Alternative Style A: ebay.us/hTuuaC
Alternative Style B:ebay.us/T4ZtHV
Alternative Style C:ebay.us/u6KerA
***120 Pcs T-Tap Wire Connectors***: amzn.to/3gdBOYS
***Fuse Tester (2 pack)***: amzn.to/3yaGbu9
***Masking Tape (4 pack)***: amzn.to/2W4lylN
**Disclaimer: These are Amazon affiliate links that will give me a small commission if you decide to use them! Appreciate your support!**
-----------------------------------------------------------------------------------------
0:00 Introduction/ Styles of LED Reflectors
1:27 Testing the Reflectors
3:07 Removing the Bumper
5:27 Installing the LED Reflectors
7:32 Removing the Taillights
8:38 Items Needed for Wiring
8:54 Using the Fuse Tester
10:33 Wiring the LED Reflectors
12:44 Thanks for Watching!
13:20 Cinematics
-----------------------------------------------------------------------------------------
Music:
Boba tea (Prod. by Lukrembo)
Bored (Prod. by Lukrembo)
Home (Prod. by Lukrembo)
/ @lukrembo - ยานยนต์และพาหนะ
Pretty cool, thanks for the tutorial. I have been looking into this for a while but wasn't shure how much work it took. Now I for sure get it done.
Best crv on TH-cam!🔥
Great peice ,
They've been in my basket ( ebay) and I'll definitely be purchasing 👍
Love it man🙏🏼
Thank you!
for anyone wondering, these can be replaced and installed without removing the bumper. it is a bit tight, but not impossible.
For sure, i just perferred to take off the bumper rather than bang my knuckles up
Nice video bro! Where can i find those muffler tips?
When you out the taillight back in did the clips pop back in? I have 2 that don’t seem to go in. The 2 screws did but it seems a little loose making me think the white clips somehow can get pushed into place
How about the driver side wires? Where should i tap?
Where can I find a nice e Houston for my '18 crv?
What gauge wiring is it?
Where can I get 2020 ones?
Pls show me or let me know which color wire is turn light, brake light, and hazard light
Im waiting for fog lights installation whit combination switch (not whit external button)
Where can we buy it
How to replasrlight break’s Honda CR-V 2018
Love your content, recently bought a 2017 crv 1.5t. You should do installs on the side! What other mods you going to do? I recently put a bov spacer, dumb but fun.
Congrats on the purchase! I hope one day I can open a shop and do installs but it's a little hard for me to work on different cars confidently without experience right now. Haha, I love the BOV, I heard some bad things about it so I don't have one but I'm sure it makes it more fun to drive. I have a video I'm editing to show the used wheels I bought for next season but other than that I don't think Ill be modding the CRV much more. The only thing I can think of is some matching window tints in the front and maybe the rear sport bumper. I want to save some money for a cheap project in the near future and plus the CRV is pretty much where I want it for a show/daily.
@@AnthonyMo what were the bad things about the bov? I really hope you put a downpipe and ktune it!!
@@brandonramsundarsingh9640 I heard that the bov either makes the car run leaner or richer than it should be but I'm not sure if those claims are valid or not. Haha, I would love to get those items but I think $1500-2000 is probably better saved for something else since the CRV is going to be a slow car regardless
clean 😮😮
Clean install only from the boys 🧹🧹🧹💪💪💪
Hey, I recently got these kind of light, but the cable is about 2’ 6” long. It seems a bit short in my opinion. Did you have any issues with the length of the cables?
Hey Jose, I had no problems woth the lenth od the wire. I actually had more wire than I needed so I taped the extra around the inside of the bumper. If the wire is short you can always solder and extend it with a equally thick or slightly thicker wire but itll take a little bit of work
Nice
I bought a pair of reflectors and they come with the wire black (negative) white(running light) and red for brake. My question is can i connect the red and use it as a turn signal?
If the light does not come on delayed like the running light, you could defintely wire it to be the turn signal. I dont see any harm in testing it
@@AnthonyMo ok thank you:)
I just want to replace a broken reflector with the same reflector. Can i just get under and replace it without removing the bumper? It's not my car so i cant currently see it.
Yes you can! no need to remove the bumper.
I put mines and I didn’t remove the bumper I just remove the taillights and throw the cable on the gap when you remove them and just remove the OEM ones and put the new ones
Haha i tried but couldnt reach them to break the clips for perfect fitment so taking it off was faster for me
Hi, I have installed Rear LED Stop/turn light, but as you said, while braking, it blinks 3/4 times and then lit up. Would you please advice me how to stop this blinking and directly it lit up. Thanks in advance.
Hey, Im not sure how to prevent the blinking. I think the led is built this way so I have no idea how to go about removing the blinking sequence.
@@AnthonyMo but you mentioned in this video that blue wire that you didnt connect for avoiding the blinking sequence, if I am not wrong. Thanks for the reply though
@@mrbaromal I havent reviewed my video in a while but I left the blue wire out to prevent the turn signals on the reflectors. You can remove one of the wires to prevent the blinking sequence when braking but it will not light up at the end. So you can choose to only have the power wired up with the tail lights but the reflector will not react to braking
Cool. I will try that. Thanks again for the reply. Keep making videos like those. We love your videos. Keep it up. Cheers.
im trying to do this to my 2018 exl, have the lights already... how long did this process take you?
How long do these last tho. I've had some bad experiences with aftermarket led lights.
I cant vouch for how long they last but the same ones still work on my car today
@AnthonyMo Thanks bro. That helped a lot.
Why not use some crimp splices and heat shrink. It's a lower profile
Hea gonna have so much problems in 5 years....
Don't remove or cut the wires t tap will pierce the wire perfectly. Great video thanks
Thanks! I remember trying to pierce the wire but I was having trouble so I did the cut to help it out a bit!
FINALLY, BEEN WAITING FOR SO LONG FOR THIS VIDEO, I bought mine so long ago and had them installed
Sorry! I should've uploaded this way back but school got me busy and demotivated 😅 how are you enjoying the look of the LED reflectors?
@@AnthonyMo it makes the CRV look better, I just wish it came out like this from the factory man, your set up is also really clean!
@@its_1chain Yeah, it'd be awesome if it came like this stock but then there wouldn't be the joy of doing it and having something a little more unique on the road. Thanks!!!
@@AnthonyMo u right u right
Why didn't you connect the indicator wire?
I just dont like the red sequential indicator going horizonal against the yellow vertical stock one on the taillights. I thought it would look very busy in the rear so I didnt connect it
@Anthony Mo ok cool. Is it still working fine?
@@tktaylor.2000 Yup still working good
nice led install but wheres the turbo?
no money ):
These are not worth. They are annoying to replace when one burns out. Had them on my accord and will never buy them again 😆
Wow, Nissan GTR!
haha,cool!
masking tape???
Too much bs for just a light.
They look bad ash
🙏🏻