PRODUCT LINK: Energizer Jumper Cables for Car Battery, Heavy Duty Automotive Booster Cables for Jump Starting Dead or Weak Batteries with Carrying Bag Included (16-Feet (6-Gauge)) - amzn.to/3wESXCD. 2020 Lexus UX 250H Base - Detailed Review - th-cam.com/video/cGISwN8tnbY/w-d-xo.html.
I had AAA come by to jump start my UX250H and that’s how I found out but Lexus sent me this link. If I may add. If your UX250H has a electric power lift and your battery is dead there is no way of opening it. You’ll have to use the terminals (seen here in the video). I was able to remove the top coverings in the back where the battery is located. I placed my battery charger onto the battery post for a over night for a slow trickle charge. My battery was low because I was on the car on a important call that lasted over two hrs via stereo system which ran the battery down.
You can open the trunk manually from inside the back of the car after lowering the back seats. There is a plastic plate that you can take off with a flathead screwdriver and then unlock and open the trunk.
PRODUCT LINK:
Energizer Jumper Cables for Car Battery, Heavy Duty Automotive Booster Cables for Jump Starting Dead or Weak Batteries with Carrying Bag Included (16-Feet (6-Gauge)) - amzn.to/3wESXCD.
2020 Lexus UX 250H Base - Detailed Review - th-cam.com/video/cGISwN8tnbY/w-d-xo.html.
This video instructions worked 100% safely! Thanks! My client is mobile again! 😀
I used a Jumpstart Pack instead of Jumper cables.
Thanks, literally saved me from waiting for 3 hours for AAA. 🙏
What a clear instruction video, thank you.
the UX 250h has a metal post marked "N" close to the fuse box so no need to remove the engine cover to boost. I can see it in your video.
I used the way he said, can only work once but you need to jump start every time, but placing on the N mark can make car beep and work
Thank you!
❤❤❤thank you
Thanks!! I couldn't figure out where to put the terminals on the UX, lol
Спасибо бро
I had AAA come by to jump start my UX250H and that’s how I found out but Lexus sent me this link. If I may add. If your UX250H has a electric power lift and your battery is dead there is no way of opening it. You’ll have to use the terminals (seen here in the video). I was able to remove the top coverings in the back where the battery is located. I placed my battery charger onto the battery post for a over night for a slow trickle charge. My battery was low because I was on the car on a important call that lasted over two hrs via stereo system which ran the battery down.
You can open the trunk manually from inside the back of the car after lowering the back seats. There is a plastic plate that you can take off with a flathead screwdriver and then unlock and open the trunk.
There’s a N logo just next to the positive place, that’s the correct place to put negative
Should I trickle charge from this point or better to connect directly to the 12V in the trunk
Do you have a fuse diagram for this car ? My 2020 ux250h usb Ports in center console doesn’t work
Just use the back battery in the boot. Much easier
how long should we keep the batteries connected to recharge them?
Normally, a few minutes is enough.
@@MorozovAutomotive thank you
is that your new car ;) ?
Nope :)
L❤❤😊
This is ridiculous.
I rescind my original reply. It was as easy as the tutorial made it look. Apologies