I have the professional model with the front extended wheels. All but two of my cables were frozen up. I am starting to think I should have scrapped this mower. I cannot get the transmission to rotate, I need to look it over more. Mabe an older video but still priceless information. Thankyou.
If you mean the plastic pulley on the transmission it is held onto the shaft by a spring pin. The spring pin and the pulley can be purchased online at ereplacementparts, partstree, your local small engine repair shop should be able to order it or a honda power equipment dealer. You will need a long punch of the proper diameter to drive the pin out and drive it back in after replacing the pulley. Good luck and let me know how it goes. Thanks for watching and commenting!
It could be the bowl gasket, the bowl nut gasket or the fuel line connection to the carburetor. The float could be stuck open or the needle valve and or seat could be bad. If you are working on the transmission and the mower will be on it's side, make sure the fuel is shut off and the bowl is drained. Good luck and let me know what you find.
Thanks for the great information. You are very deliberate and detail oriented!
Glad it was helpful!
this 5min video was the last step in repairing my Honda mower!could not have finished it with out this video,thanks! mike D.
Glad this video helped. Good luck and thanks for watching!
Thanks for going back and posting this lost footage - it was a mystery as RepairClinic footage didn't deal with the shift cable.
thank you so very much for redoing this lost footage! could not have done this without it!
Glad it helped. Thanks for watching and commenting.
Thanks Mike D!! Needed the lost footage!!🤣
No worries!
Thanks for your videos, well said and pics of all crucial parts. Couldnt of done my shift cable repair without it. God bless all vets. Mark W
Thank you for the kind words. Helping others is my goal.
I have the professional model with the front extended wheels. All but two of my cables were frozen up. I am starting to think I should have scrapped this mower. I cannot get the transmission to rotate, I need to look it over more. Mabe an older video but still priceless information. Thankyou.
Good luck!
Hi sir , I have a cuestión ? How you change the plastic pulley ?, Because my is broken and the band it’s out of the pulley .
If you mean the plastic pulley on the transmission it is held onto the shaft by a spring pin. The spring pin and the pulley can be purchased online at ereplacementparts, partstree, your local small engine repair shop should be able to order it or a honda power equipment dealer.
You will need a long punch of the proper diameter to drive the pin out and drive it back in after replacing the pulley.
Good luck and let me know how it goes. Thanks for watching and commenting!
Appreciate your help sir , your videos helping me a lot work on my machine thanks a lot sir I will let you know sir thanks
Hi sir it’s marco something happened with my machine the gasoline comes out from de carburetor,, do you know way that happen?
It could be the bowl gasket, the bowl nut gasket or the fuel line connection to the carburetor. The float could be stuck open or the needle valve and or seat could be bad. If you are working on the transmission and the mower will be on it's side, make sure the fuel is shut off and the bowl is drained. Good luck and let me know what you find.
My mower had the correct part number printed on the cables-rather than wasting an hour to find the correct part.
These mowers are terrible to work on imo.
Thanks for watching!