Easy Way to Make a Wavy Bowl on the Pottery Wheel
ฝัง
- เผยแพร่เมื่อ 20 เม.ย. 2024
- In this video, I will guide you through the process of creating a unique wavy bowl using the pottery wheel. Perfect for beginners and seasoned potters alike. Links for the Tools and Supplies used are listed below in the Show More Section 👇
------------------------------------------------------------------------------------
🎯 Disclosure:
Some of these links go to potterycrafters.com, and
some are affiliate links where I'll earn a small commission
If you purchase at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
Sponsored videos and brand-sponsored content on this
channel will be disclosed within the videos and/or
descriptions.
❓ Question
Do you have any Questions, Comments, or
suggestions for Future Videos
Feel Free to Post them in the Comments Section.
Don't forget to Like Subscribe! And Turn on Notifications (🔔)
------------------------------------------------------------------------------------
🔷 Tools and Supplies 🔷
✅ Amaco A Mix Stoneware White Clay
geni.us/hZeg
✅ Plasti bat
geni.us/lwHo8Wb
✅ Wavy Wire Cutter
geni.us/UT0Rot
✅Throwing Sponge
geni.us/cy3ms
✅ Ultimate edger
geni.us/iYjYY
✅ Needle Tool
geni.us/idLXml
✅ SKYTOU Pottery Wheel
geni.us/r1VewMF
✅ Artista Pottery Wheel
geni.us/O0jABh
✅ Brent CXC Pottery Wheel
geni.us/VFbap
------------------------------------------------------------------------------------
🔷 Bonus Material 🔷
👉 Watch - How to Center Clay on The Wheel
• How to Center Clay on ...
👉 Watch - How To Use Bats on a Pottery Wheel | Types - Usage - Storage
• How To Use Bats on a P...
👉 Watch - How to Make Ware Boards for Your Pottery
• How to Make Ware Board...
👉 Watch - How to Prevent Pottery Clay from Cracking While Drying
• How to Prevent Pottery...
👉 Read - How to Prevent Pottery Clay From Cracking While Drying
potterycrafters.com/prevent-p...
👉 Read - 11 Problems Centering Clay and Easy Ways to Fix Them
potterycrafters.com/11-proble...
👉 Read - 5 Different Ways To Wedge
potterycrafters.com/wedging-c...
------------------------------------------------------------------------------------
🔷 My Pottery Wheel and Kiln 🔷
✅ Brent CXC
geni.us/VFbap (Amazon) (Blick)
✅ Skutt KM Series 818-3
geni.us/GCrzBDK (Blick)
------------------------------------------------------------------------------------
🔷 Tools in My Studio that I use all the time 🔷
Hand Tools
potterycrafters.com/recommend... tools/
Glazes
potterycrafters.com/recommend...
Brushes
potterycrafters.com/recommend...
Favorite Clays
potterycrafters.com/pottery-c...
------------------------------------------------------------------------------------
👇 Visit
Pottery Crafters Website
potterycrafters.com
Pottery Crafters Pinterest
/ _created
Sponsored videos and brand-sponsored content on this channel will be clearly disclosed within the videos and/or descriptions.
I saved this video to watch later and I didn't get round to watching, but I so wish I had. Today in my adult Ed class 3 bowls I threw ended up flopping over, if I had of watched I could have had some great bowls. Now I know what to do when it goes flop lol thanks for sharing😮😊
Now that's funny. Cool. Glad it may be helpful in the future. 😊
Marie, I love the unpredictable shapes. A definite hit as serving dishes!
Thank you Art!
Great bowl,Marie. I can’t wait to try this technique. Please keep the ideas and teaching coming. Thanks. 😊
Thank you so much! Will do ❤️
LOVE this idea, Marie! As always, thanks very much for sharing your knowledge!
You are so welcome! Thank you MaryJean 😊
your voice is soo calming 🫶🏻
Thank you so much. I find crafting pottery to be relaxing and therapeutic.
Hello 👋 watching from Australia 🇦🇺
Hello 😊 That is very cool. Love Australia!
I just love these, and I can’t wait to give it a try! Thank you so much! ❤
That's great. You are most welcome. My next video will be on a few ways that I glaze them. In about 2 more weeks. 💖
You make it look so easy!! ❤
Thank you Linda!
geat idea!! Thanks Marie xxx
You are most welcome ❤️
that was great. Thank you, I will try that.
Cool. I think they are fun to make 😊
Beautiful.
Thank you! 😊
That is so cool!
Thanks Paul 😊
Beautifully done instructional video. BTW, why do you use a wavy wire tool to take your pieces off the bat?
Thank you Janet. Always nice to hear from you. I use the wavy wire because I don't like to leave the bottom flat. I don't like trimming the wavy bowls because the rims are uneven 😊
Off topic… would you happen to have a cone 06 slow drip and
Hold or just a good cone 06 low fire firing schedule? I am new to low fire clay and I can’t find a 06 glaze firing schedule anywhere. I don’t typically use my kilns default. So thank you! I truly appreciate it!
You are most welcome. There are 06 glazes that drip that contain more flux (melting agent). You have to look for glazes that say flow, float, flux. 😊
Thanks I think you misunderstood lol I was asking for a glaze firing schedule for cone 06. You know a schedule for firing. Like when you enter specifics on the firing. I don’t have one for low fire and I need one for cone 06 glaze firing. To enter into my Bartlet. I can’t find one at all from google. I don’t use the default setting in my kiln. I figured you would know since you seem to know everything ceramics! 😊
Thank you. Sure, this is my firing schedule for 06 glaze firing.
06 Firing Schedule
Segment 1
target temp 1000°
Rate 325°/hr
Approx. time 3 hours
Segment 2
target temp 1100°
temp change 100°
Rate 100°/hr
Approx. time 1 hr
Segment 3
target temp 1828°
Rate 125°/h
Approx. time 6 hrs
Total time ~ 10 hrs
I hope this helps
Thanks so much. It’s so difficult to find a schedule online. I’ve literally scoured the internet. Do you ever did too and holds for any of your schedules? Apparently it helps with defects. I’d love a video about something like that! Thanks you’re really kind to help me!
Sure. You can put a 10 minute hold on at the end. Keep in mind if you put a 20 minute hold on you go up one more cone size.
On your wavy bowls, how do you trim the bottom and make a foot? If the sides are wavy, how can you balance the bowl for trimming?
Hi Nikki. Good question. A use the ultimate edger to make the foot and cut the bowl off the bat with my curly wire cutter because I don't like leaving my pottery untrimmed. I show it at the 6:50 point in the video. 😊
@@PotteryCrafters Thank you for the demonstration on how to use the ultimate edger. Very helpful.
Hi Marie! That was so cool. Absolutely love those wavy bowls. Your videos always hypnotize me 😊❤
Thank you so much Donna 💖
You are most welcome Nikki 😊