2017 Silverado 1500 Gets A 7” Lift, 20x10’s, and 35’s!
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- On this week’s Spotlight, we give a 2017 Silverado 1500 “Real Tree Edition” a NEW LOOK with a 7” Rough Country Lift Kit, 20x10 -18 Fuel Assaults, and 35x12.5R20 Nitto Ridge Grapplers! CHECK IT OUT!
Fuel Assault (Black Milled) 20x10 -18 & Nitto Ridge Grappler 35x12.5R20
bit.ly/2t1Xxdu
Check out this 7” Rough Country Lift Kit for your ‘14-17 Silverado 1500
bit.ly/2GeVB9e
Check out all Lift Kits Here:
bit.ly/2wsM73C
View this truck in our Gallery!
bit.ly/2Bh2bJ8
Subscribe now to stay up to date on all videos coming out from Custom Offsets!
goo.gl/P71pkN
Do 20x10 -18 wheels with 35"x12.5" tires fit on a 2017 Chevrolet Silverado 1500 4WD Rough Country Suspension Lift 7"?
Yes it does! This 2017 Chevrolet Silverado 1500 4WD is running Fuel Assault 20x10 -18 wheels Nitto Ridge Grappler 35"x12.5" tires with Rough Country Suspension Lift 7" suspension, needs Minor Plastic Trimming and has No rubbing or scrubbing. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Slightly Aggressive. Also remember spacers impact fitment, this ride is running None in front and None in rear.
Cant wait to see my truck
Rough country at it again 🤩🤩🤑🤑
If only you guys were down here in Texas, I have a 17 realtree that I want looking like this
That thing is so sweet!!! love the realtree edition trucks!!!
Sittin' purty!
Just dropped my sierra off to get a 7" knuckle kit with 35s
What size rim bud
@@jrgarza7010 20" wheels. Came out great.
Nice ride! How is the fuel efficiency? Notice any major drop? I am thinking of doing the same setup. I already have the rims with smaller tires. If you noticed a drop in the MPG, did you address it?
Beautiful truck. I heard your guys review on updated rough country kits. Saw the videos. Great videos. And glad see you installing them on folks rigs. Nice truck love the theme real tree. Lift was just fitting .
I bought a 14 Sierra 1500 with a 9 inch McGaughys lift.. the rims are fuse 22’ by 14 width wrapped around in a 35x12.5 comforser.. I’ve been getting heavy shaking when I hit 50 and above and the front tires are wearing off on the center.. I’ve already tried alignment and balancing but it won’t work.. asking for some help.. you think it’s the tires, the lift or something else??
Jack the front end up and check for play in balljoints and wheelbearings thats where i would start. If not just make sure that the weight did not come off or something else like that and everything is tight and where it should be. If you still do not figure it out send an email to info@offsetsgarage.com and they will be able to help you out with figuring out the issue!
Great thanks for your help and love your videos ✌️
did you regear this truck??? I want 35 with a 6.5 zone on my 17 Silverado but have been hearing a lot of mixed opinions about regearing and that is expensive! Please let me know your thoughts!
No regearing was done to this truck, but it is not a bad idea to regear when going bigger with tire sizes.
what's the cost roughly to regear a 17 Silverado 4x4 to a 4.10 or a 4.56 gear ratio?@@CustomOffsetsTV
Would u be able to fit 24x14 with a 35 13.50 tire on a 2017 silverado 1500 with a 7inch lift...or 24x12 with same tire either or ..anyone..even u u have to cut..
You are able to! If you're still concerned email our experts at info@customoffsets.com and they can help you out! 🤘
how often do you need to do maintenance on this?
i have the exact same lift kit.... just wondering what do i need to do as far as maintenance? Its been on my 2017 Silverado for 3 yrs already.
Be thinking about going down to 35s on my 7 inch lift I got 37s now but bad mpg and minor suspension problems
How bad do they rub? I have 35s now but with a 7 inch lift on my 16 Sierra I think they look too small. I have Ironman mts which I’m thinking run a little smaller. Wondering if I stick with 35 with a different brand or step up to 37
Nick Clarke I got the 7 inch Mc gaughy’s lift but upgraded lots of suspension parts like control arms tie rods wheel hub assembly etc.. they have never rubbed even with the 37s I ended up getting 35s Nitto ridgegrapplers hybrid tires and they are so worth the price but now I wish I would’ve stuck with 37s but I’ll go back once these are worn out. 👍
I trust y’all more than every shop in the whole damn country !!! I want y’all to install my lift this year
Lets do it! Send an email to info@offsetsgarage.com and well see what we can do!
@@CustomOffsetsTV Nice ride! How is the fuel efficiency? Notice any major drop? I am thinking of doing the same setup. I already have the rims with smaller tires. If you noticed a drop in the MPG, did you address it?
So I got a question, I recently just lifted my truck with a 7.5 rough country and is it normal to lose turning radius? Also if so how can u improve it I can’t make a lot turn cause of it
If you did the knuckle kit you will lose turning radius. With the bracket kit you do not.
What measure of wheels will give me a 7 inch clearance from my tire to wheel on a 37x12.5???
A 20" wheel would be pretty close
Dream set up is all that needs to be said.
The views were at 666 so i had to watch it😂 great vid!!!
Hey guys. I know this totally has nothing to do woth this video but I'm wanting some details on the Fury Country Hunter R/T. Not many videos or reviews on them.
All feedback is appreciated thankyou
I have a 2019 GMC sierra slt, would 22×12 on 35" tires fit on my truck with a leveling kit?
Heres what i found in our gallery, could not find an exact match though. You could make it fit but would imagine youd have to do a good amount of trimming.
www.customwheeloffset.com/wheel-offset-gallery?order=&make=GMC&model=Sierra+1500&year=2018&suspension=Leveling+Kit&tire_height_from=35&tire_height_to=35&page=1
@@CustomOffsetsTV my truck stock right how has 20×10 on 33 inch tires, so I would assume there would be some amount of rubbing
Nice truck. Anyone Run 35s on a 2008-2013 silverado?
What lift will I need for minimal rubbing? Furthermore, what song is this?
Check out our gallery and see what other people with 35s on their 2008-2013 Silverado did!
www.customwheeloffset.com/wheel-offset-gallery?order=&make=Chevrolet&model=Silverado+1500&year=2008&tire_height_from=35&tire_height_to=35&&page=137
There is only one Realtree edition truck that I have ever seen here in Illinois. It would be cool to do this to that Realtree truck then put a gun rack in the back.
Yee haw
@@deon865 #RHEC
Never seen a real tree silverado out on the streets before. Just midnights and rally editions
Those running boards, what brand are they?
It’s a clean truck tho
whats this song called???
I got a ferd ad
Song???
In house made music beats!
@@CustomOffsetsTV I need this song! Can I get it anywhere?
Looks nice, Factory bolts with thread sealer shouldn't be reused. Install new ones and use a torque wrench for proper torque not just a impact. Don't be a butcher ☠️
We torque every nut and bolt to spec, but for video purposes we dont show it because it would be a very long video.
@@CustomOffsetsTV yea I seen your guys quality control is off the chain. Its time consuming torque every nut and bolt. So can see why didnt add it to video. Just common sense that you guys would do such .
Nice,,,,....;)
Why couldn’t mine be so damned e.z. ...!!!?!??
#GoPackGo
Spend all that money just for get a Rough country lift🤦🏽♂️ get a BDS
Brian Tezoquipa Rough Country is better than you think