I really liked how you explained what parts are being upgraded, how other brands use basically the same parts, and that its better to go to a 4 than a 3.5. Vs other channels that just throw a lift on with no added info.
Hello, There are many variables that would be different and also parts that may or may not comes with the different kits. It would all be dependent on what you are looking to do and what is needed to achieve it! Thank You --ExtremeCustoms.com
Hello Andrew, The main reason you would want to put on a kit this size is to avoid that rubbing and trimming for a larger sized combo. This lift is going to help you avoid having any further modifications on 22s and bigger as well as anything under 22s. As well we have numerous options for lifts and levels that vary in installation time, add-ons and numerous other variables! I can certainly help you with any questions as well as find the right lift that suits your needs! Thank You --ExtremeCustoms.com
Will this same kit work on 2wd truck? Seen that its listed as compatible with 2wd models but do you still use all the drop brackets amd everything being that there is no front differential?
If I’m going to put a 4 in. lift, 20 in. rims, and 35 in. tires on my 2021 Chevy Silverado Custom, is it going to rub? Or should I downsize on tires. I’m trying to determine what to do before adding them.
Could I add A 4inch lift on my Chevy Silverado with 33s Bf goodrich All Terrains? Also I use my 1500 to haul a 7,000.00 pound tractor what can I do to keep my truck from going all the way down from the back?
Hello Patrick, That will depend on many variables. If you are asking in general that will depend on the vehicle, wheel size and modifications already done. If you are speaking on something specific please let me know and I can make sure to answer that based on the specifics! Thank You @ExtremeCustoms
Hello, If this build had them initially rubbing on the flaps they would have trimmed or completely taken them off. It would be noted on the specific build if there was any rubbing on the mudflaps. Thank You @ExtremeCustoms
Hello, I would be happy to help you out with Pricing, fitment or anything else you needed! Please reach me at my Sales email, amaziah.m@extremecustoms.com.
Keneaux the Bilstein 5100 offers a 1.75” lift and the strut spacer has 4” of lift so if you did swap them, the Bilstein setup wouldn’t be as high. You’d need a 2.25” strut spacer to be used with the Bilstein at the highest 1.75” setting.
The truck has a rake from factory. The strut spacer needs to be taller to accommodate for that. The rear was lifted 4" but the front was probably lifted 6-7" something like that
The issues are with the budget UCA uniball kits, which are essentially stretched out leveling kits. No issues to report with the actual Performance knuckle lift kits. Hope this helps!
I really liked how you explained what parts are being upgraded, how other brands use basically the same parts, and that its better to go to a 4 than a 3.5. Vs other channels that just throw a lift on with no added info.
So how did it drive? Not worth talking about?
What was the end truck height? This is exactly what I want for my truck by I need it to fit in my garage.
Im doing a 4in lift on 20 x10in tires on 20in rims. Is that good for a 4in lift
I would like too see what a 4” lift looks like on a 2012 Silverado with tires 285/55/20 the stock size is 275/55/20 I believe
My 2011 silverado 1500 crew cab has stock 265 70 17
Does lifting your truck affect the lane assist out anything?
So this will fit trucks with electric power steering?
You guys should really look into the 4.5 inch cst lift for the 2014 2018 gm trucks.
How much does That lift job come out to
The biggest problem with this model 14-18 is the UCA'S are useless when lifted. Be safe!
What’s that ?
I never saw them cut for the new crossmember 🤨🤨
Doesn't lowering the diff defeat the purpose of the 4 inch instead of the 3?
Hello,
There are many variables that would be different and also parts that may or may not comes with the different kits. It would all be dependent on what you are looking to do and what is needed to achieve it!
Thank You
--ExtremeCustoms.com
What are you using for tire package size etc in this 4" lift
Does this lift increase the front track width?
Probably, since I see the bigger steering knuckles in this kit.
@@KennysLyfe Usually compensated by a rear spacer... high country trim with performance lift package im sure isnt concerned with an extra $500
A side by side would have been nice to see 😂
Does this setup rub at all and did you have to do any trimming?
Hello Andrew,
The main reason you would want to put on a kit this size is to avoid that rubbing and trimming for a larger sized combo. This lift is going to help you avoid having any further modifications on 22s and bigger as well as anything under 22s. As well we have numerous options for lifts and levels that vary in installation time, add-ons and numerous other variables! I can certainly help you with any questions as well as find the right lift that suits your needs!
Thank You
--ExtremeCustoms.com
Did the transmission went out already? If not is a matter of time. It will.
Why you say that?
@@FranciscoRodriguez-nx8dq Mine and my friend went out already. 2015s. I think there is a class action lawsuit on gm for that issue.
Will this same kit work on 2wd truck? Seen that its listed as compatible with 2wd models but do you still use all the drop brackets amd everything being that there is no front differential?
What is the year, make and model of your vehicle and I will find you the correct set up! --Extremecustoms.com
@@ExtremecustomsTV 17 Silverado double cab 2wd
@@ExtremecustomsTV looking for something in the 3 to 4 inch range with knuckles included and preferably coilovers instead of spacers
Do you know which control arm you currently have? --ExtremeCustoms.com
@@ExtremecustomsTV truck came with stamped steel arms , I have kryptonite upper control arms , lower arms are still stock
If I’m going to put a 4 in. lift, 20 in. rims, and 35 in. tires on my 2021 Chevy Silverado Custom, is it going to rub? Or should I downsize on tires. I’m trying to determine what to do before adding them.
Reach me at my sales email , I can show you visuals of what it will look like.
amaziah.m@extremecustoms.com
Should of put the 2.5 coil overs on it .
Gary Clark spacers are horrible
Jam Jam why?
Could I add A 4inch lift on my Chevy Silverado with 33s Bf goodrich All Terrains? Also I use my 1500 to haul a 7,000.00 pound tractor what can I do to keep my truck from going all the way down from the back?
Yes you could! That wouldn't be a problem!
Air bags would eliminate the “going all the way down in the back” tons of kits out there that aren’t so bad on the wallet
Allen Carabajal nice I’ll get me some air bags or should I just get heavy duty suspension?
Justin Daniel really could go either way, but I personally would do air bags, plan on doing it for my truck soon.
Allen Carabajal nice I’ll probably get air bags then I was thinking heavy duty suspension but we shall see lol nice!
I'm doing a Fabtech on a 2017 now but the truck has torsion bars in the front.
Hello,
I would be happy to help you out with Pricing, or anything else you needed! Please reach me at my Sales email, amaziah.m@extremecustoms.com.
Does the wheels come in contact with the mud flaps when turning?
Hello Patrick,
That will depend on many variables. If you are asking in general that will depend on the vehicle, wheel size and modifications already done. If you are speaking on something specific please let me know and I can make sure to answer that based on the specifics!
Thank You
@ExtremeCustoms
@@ExtremecustomsTV i’m asking about the truck in the video
Hello,
If this build had them initially rubbing on the flaps they would have trimmed or completely taken them off. It would be noted on the specific build if there was any rubbing on the mudflaps.
Thank You
@ExtremeCustoms
Will this kit work on a 2wd? If so does the frame need to be cut also since there’s no dif. Drop?
Hello,
I would be happy to help you out with Pricing, fitment or anything else you needed! Please reach me at my Sales email, amaziah.m@extremecustoms.com.
pretty sure you have done the 4" bds also. out of these two which one would you perfer more? which one sat taller for the 4"
They both sit at about the same height! --ExtremeCustoms.com
Extreme Customs does this kit add to the front track width?
It does not.
Thank you, ExtremeCustoms.com
No rub on the fron mudflats?
No rub. --ExtremeCustoms.com
It went from Grandpa's truck to Grandsons truck👍
Couldn't agree more!
How much taller is this compared to a rough country 3.5 knuckle lift?
Need this for my 2012 seirra crew cab whats the price.
Youre looking to purchase the 4" lift kit?
Thank you,
ExtremeCustoms.com
@@ExtremecustomsTV yes
Will my tires stick out if go with a negative 13 offset?
Minimally yes!
ExtremeCustoms.com
@@ExtremecustomsTV how many inches?
What size wheel are you looking to run?
Thank you,
Brandon
ExtremeCustoms.com
@@ExtremecustomsTV 9 or 9.5 wide with 12.5 33" yoyo MT
9 wide you would be at about a half inch and 9.5 wide you will be around .75 inches
ExtremeCustoms.com
Extreme customs can I run my stock wheels without spacers on this kit
What size wheels and tires are you currently running?
ExtremeCustoms.com
20x 9. Stock wheels with toyo MT tires 12.5 X 33
That shouldnt be any issue at all with that lift!
ExtremeCustoms.com
@@ExtremecustomsTV the fabtech website states that I need a 5inch back spacing rim or -13 offset
To fit flush with fenders.
ExtremeCustoms.com
Can I fit a Bilstein 5100 maxed out at 1.75" instead of using the strut spacer? Or would that not be big enough or not compatible?
What are you trying to clear?
Extreme Customs im going try to avoid using the ugly strut spacers.
That shouldn't be a problem!
Keneaux the Bilstein 5100 offers a 1.75” lift and the strut spacer has 4” of lift so if you did swap them, the Bilstein setup wouldn’t be as high. You’d need a 2.25” strut spacer to be used with the Bilstein at the highest 1.75” setting.
Would've preferred to see chrome wheels with this truck. Still a good job regardless.
Thank you!
Does this truck have the magneride system?
Not 100% sure you can call and we will gladly get some more information for you!
The_Safe_Haven no, stock high countries don’t have magneride. You have to get the high dessert package to get magneride in that year of Silverado.
Does Fabtech sell this 4" kit for a 2016 2wd Sierra?
Yes they do! Shoot us a email if you have any more questions : info@extremecustoms.com
-Alex
Good job 👏
How much would it cost for a 4’ with 20/12 with 33 12.50
Marci Torres low side with all budget stuff. 4000-4500 installed probably
so what if i did 18in wheels with 35s do i still have to trim
Depends on the lift size and the vehicle! Get a hold of us and we can help you out and get you taken care of!
Would like a quote in this exact thing.
Hi Junior! Shoot us a email we are happy to help : info@extremecustoms.com
That is not a 4 inch kit. That strut space is Huge! It may say that but the total lift had to be over 6 inches.
Matthew Cahoon liar
Yeah, because you obviously know more about the lift by just watching a video
The truck has a rake from factory. The strut spacer needs to be taller to accommodate for that. The rear was lifted 4" but the front was probably lifted 6-7" something like that
Go to a Rough Country! 6 inch or 7.5 lift A lot cheaper and quality parts
Richard DiGrosso rough country is trash
I have a 4” lift on a 2008 Silverado
Awesome!
You guys seem like a generic channel of Custom Offsets
And you seem like a generic troller of TH-cam troller kind. Let these guys just do their thing and enjoy life.
Does this increase the front track width?
got 6 inch fabtech on a 2015 it did not wide front track no spacers needed
gbcamaro gbcamaro
I’ve heard bad things about the 4 inch tho so I’m going with zone 4.5”
The issues are with the budget UCA uniball kits, which are essentially stretched out leveling kits. No issues to report with the actual Performance knuckle lift kits. Hope this helps!