I’ve watched a few other videos describing how this is done, they didn’t work. They left out , the waiting 5 mins. for the lights to stop flashing, then proceed. The manual doesn’t even state this 🤔. Thank you for sharing and explaining exactly how to do this and not leaving out important steps .
Your video helped tremendously and is better than the actual Keurig "how to descale" video. Example-you tell us that when the lights go off the machine is powered off. 🤗 Thank you!
GUYS LISTEN my keurig would absolutely not brew at all. It would descale and it was clear in the needles. But my lights wouldn’t flash. I call support and she tells me to push the silicone button on the inside where the lever clicks to signal it’s closed on a k cup. If it doesn’t click then it’s completely broken. OR the button is to far down which I found out after getting mine replaced and taking it apart the old one myself. You can take the k cup holder out completely and the silicone button and push the little lever up from underneath and put the button back and it should start clicking and it should start brewing again!! Mine was tested 3 times it’s working again! MAKE SURE ITS UNPLUGGED FIRST.
Fantastic! Thanks for the great video of my Keurig Essentials model. Just finished the descale and light is now off. Great instruction, I watched some others and didn't find how to turn my style machine off you explain well.
That's exactly what I did 🤣. I'm descaling my machine for the first time today and I said to myself that it's easier to unplug the machine and plug it back in then wait for the lights to stop flashing. Great minds think alike!
Thank you soo much for sharing this very informative video. I was psyched when my steps were in since with yours. Hallelujah! Sure beats trying to find my pamphlet.😂
Thank you for the detailed video. After a couple of tries to descale my keurig seemed to be really plugged it only dispensed a few drops and after just wen t out 😞
I ran my machine in descale mode, start to finish and the light didn't out. So I unplugged it, and I ran plain water 3 times, and the descale light still has not gone out. I used water and vinegar. It worked fine the first 2 times I cleaned it. Do you have any suggestions. Thank you
My brother also stopped working. My machine is hardly used and it’s very clean. But it stopped when the descale light came on. Do you think that’s why? I need to descale 1st??
Can u pleaseeee do a video on this model. I always have a problem with a water not pumping. I have tired everything I have literally gone thru 3 of them now but why doesn’t the water stop pumping ????
Unless you're worried about the light you can just clean your coffee maker without having to do all the extra steps. Just run 12 oz of water / vinegar several times as if you're doing a regular cup of coffee but obviously no coffee and instead of water use half vinegar half water. I do this regularly but I am learning about the descale, I have a coffee but I am learning about the descale, I have a much older Keurig and it doesn't have that
I just got a new one of this K-Cafe, how often should I descale my machine? Once a week? Or twice a month? My husband and I drink coffee 2-3 a day. Hoping for your response. Thanks!
So as soon as I get to the descaling part and press 12 it spits and all the lights turn off. I’ve tried letting it cool and unplugging and replugging it but there’s no change
Mine still won’t work after hitting to 8 and 12oz and then hitting the 12oz again I’ve repeated this process about 6 times and the water/vinegar fix won’t brew at all
I've never used water from the tap. Which is a heavy water where I live. I've used natural spring water and it works great. You can use Distilled water, but some have a weird taste. You can always use a water filter as well that attaches to your sink.
@@JustADad thank you so much. I’m still having a lot of trouble with mine. I don’t think it’s going into descale mode, the light is not flashing like yours.
This is one of the worst models they have I have literally gone thru 3 in one year. I have no idea what it is but each time after a few uses it doesn’t take the water I have seen all your videos which are supper helpful. But this model is a pick of junk it keeps breaking down soooooooooooo fast I have no idea why and it’s the same issue over and over it just doesn’t suck up the water.
I’ve watched a few other videos describing how this is done, they didn’t work. They left out , the waiting 5 mins. for the lights to stop flashing, then proceed. The manual doesn’t even state this 🤔. Thank you for sharing and explaining exactly how to do this and not leaving out important steps .
Glad it helped
Thank you this has been the best most detailed video I have found and was able to successfully descale my keurig! Thank you!
You are so welcome!
Your video helped tremendously and is better than the actual Keurig "how to descale" video. Example-you tell us that when the lights go off the machine is powered off. 🤗 Thank you!
omg thank you soooo much!!!!!! i wasted a whole bottle of the descaling solution because the instructions were so vague lol I appreciate you!
You're welcome!!
This is the video that helped me the most!!!!!🎉🎉🎉🎉🎉
GUYS LISTEN my keurig would absolutely not brew at all. It would descale and it was clear in the needles. But my lights wouldn’t flash. I call support and she tells me to push the silicone button on the inside where the lever clicks to signal it’s closed on a k cup. If it doesn’t click then it’s completely broken. OR the button is to far down which I found out after getting mine replaced and taking it apart the old one myself. You can take the k cup holder out completely and the silicone button and push the little lever up from underneath and put the button back and it should start clicking and it should start brewing again!! Mine was tested 3 times it’s working again! MAKE SURE ITS UNPLUGGED FIRST.
Thank you!!!
Fantastic! Thanks for the great video of my Keurig Essentials model. Just finished the descale and light is now off. Great instruction, I watched some others and didn't find how to turn my style machine off you explain well.
Thank you! That descale light finally went off. Can't wait to watch your other videos.
Thanks so much for the informative video. You helped me descale my Keurig twice now. First with descaling solution now with vinegar. ❤
You are welcome!
Instead of waiting 5 minutes for the lights to go off I just unplug the machine and plug it right away. Works great 👍
That's exactly what I did 🤣. I'm descaling my machine for the first time today and I said to myself that it's easier to unplug the machine and plug it back in then wait for the lights to stop flashing. Great minds think alike!
Thanks, I was able to get mine descaled! Appreciate the video
Thanks for this. I lost my manual during my move. Works like a charm!
Thank you soo much for sharing this very informative video. I was psyched when my steps were in since with yours. Hallelujah! Sure beats trying to find my pamphlet.😂
TY used you Descaling Video last year now this to clean my needles glad I saved it in a list!
Glad I could help!
Wonderful how to video! Thanks!
Glad it was helpful!
Thank you for the detailed video. After a couple of tries to descale my keurig seemed to be really plugged it only dispensed a few drops and after just wen t out 😞
I ran my machine in descale mode, start to finish and the light didn't out. So I unplugged it, and I ran plain water 3 times, and the descale light still has not gone out. I used water and vinegar. It worked fine the first 2 times I cleaned it. Do you have any suggestions. Thank you
Very helpful!
Ty this was very very thorough. I really appreciate it
You're very welcome!
Thank you for this video cause this machine was driving me crazy. 😂
You're welcome!!
Thank you "Dad"!!!!😊
thanks dad, it helped me a lot!.
So helpful! Thank you 😊😊😊
Glad it was helpful!
Thanks for the video is very helpfull 🎉🎉
Glad it was helpful!
My brother also stopped working. My machine is hardly used and it’s very clean. But it stopped when the descale light came on. Do you think that’s why? I need to descale 1st??
Three thumbs up! Thank you! 😁
Thank you so much this video helped a lot
Can u pleaseeee do a video on this model.
I always have a problem with a water not pumping.
I have tired everything I have literally gone thru 3 of them now but why doesn’t the water stop pumping ????
Omg thank you so much , it worked on mine 🙏🏻☕️
Do you have to descale it if it’s new? Or just the 1 time rinse brew with no k-cup?
no descale just rinse
Unless you're worried about the light you can just clean your coffee maker without having to do all the extra steps. Just run 12 oz of water / vinegar several times as if you're doing a regular cup of coffee but obviously no coffee and instead of water use half vinegar half water. I do this regularly but I am learning about the descale, I have a coffee but I am learning about the descale, I have a much older Keurig and it doesn't have that
Thank you so much!
Thank you!! Just great!!😊
You're so welcome!
THANK YOU OMG
I just got a new one of this K-Cafe, how often should I descale my machine? Once a week? Or twice a month? My husband and I drink coffee 2-3 a day. Hoping for your response. Thanks!
I got my 1st light come on after 5months drinking 1-2 a day
So as soon as I get to the descaling part and press 12 it spits and all the lights turn off. I’ve tried letting it cool and unplugging and replugging it but there’s no change
This helps a lot thank you@
I have the 85 model, can’t get this to work....
Thanks man
What if my add water light doesn’t go out after fill it with water before doing the fresh water rinse
Would I be able to disable the descale notification with my K-Supreme Plus?
not sure, but I don't think so
Mine still won’t work after hitting to 8 and 12oz and then hitting the 12oz again I’ve repeated this process about 6 times and the water/vinegar fix won’t brew at all
thank you!
Can some sort of water filter instead of tap water help make the water softer so you don’t have to descale as much?
you can used bottle water witch will help
I've never used water from the tap. Which is a heavy water where I live. I've used natural spring water and it works great. You can use Distilled water, but some have a weird taste. You can always use a water filter as well that attaches to your sink.
@@JustADad thank you so much. I’m still having a lot of trouble with mine. I don’t think it’s going into descale mode, the light is not flashing like yours.
My machine flashing the 8oz & 10oz lights and not working 😭
This is one of the worst models they have I have literally gone thru 3 in one year.
I have no idea what it is but each time after a few uses it doesn’t take the water I have seen all your videos which are supper helpful.
But this model is a pick of junk it keeps breaking down soooooooooooo fast I have no idea why and it’s the same issue over and over it just doesn’t suck up the water.
Thanks you saved us 👍🏽👍🏽👍🏽