Amy that was a great video. I've never seen new tracks begin fitted before. and you's made it look so easy. but I'm sure those two men knew what they were doing. and of course Amy you as usual was brilliant. the way that you chated and helped them out. bye ❤❤❤
Great video as always Amy and great to see how simple it is to change rubber tracks, the adjustment system sounds great all the machines I've worked on have had metal tracks but they have all been bigger machines and with grease pumped adjusters and oh the mess. On a lighter note it's the first time I've seen Dipper actually getting up and down off the machine, I wasn't sure if he could do it himself with his little legs but obviously he can and quick when you play video in high speed 😂😂
Hi Amy great video as usual thanks. It's testament to your maintenance of the machine how good it looks. Even the fitters were saying how he could tell it had been well greased. Pat yourselves on the back you have kept the machine in excellent order. Look after your machines and they will look after you my old boss used to say. The track adjustment system is awesome that saves some time thanks again for sharing the video on a school night 😅 take care and stay safe 👍 😊.
@@the_digger_girl from experience if you nead any try the cameo track think dig bits sell it , much smoother tracking no vibration , it’s like it’s got a continuous link no gaps ! 👍
Great video the guys from argyle made that look so easy your right support your local dealer especially if they have good on field service. Thank you for posting 😀👍
Looking good 👌. Those tracks were definitely ready for changing I think I'd have taken the takeuchi to the Kubota to change the tracks nothing better than a gripper for putting tracks on
Automatic track tensioner omg heaven I've done steel tracks where your looking for the king pin usually the gas bottles are involved heating up the king to hammer it out lol. With the amount of abuse the tracks must take going on off the truck different sites you have done well there normally hanging to bits by now lol another good vid keep them coming at the end it looks like a new machine 🙂👍
As smaller excavators go Takeuchi over kubota any day 👍plus I have had idiots get concrete with metal in it stuck between sprocket and track frame when blading crush and run material and keep going until track goes bang 😤
2 things wouldnt have been easier to take a grinder and cut the old tracks off and secondly is there a reason why if your dad loves that brand you havent bought anymore of them. Not critising just curious
You have to get the idler back the easiest way to o do it is jam something on the track and run it round the sprocket cutting it off would mean pushing it back with the back of the bucket and tracks are surprisingly tough
Amy that was a great video. I've never seen new tracks begin fitted before. and you's made it look so easy. but I'm sure those two men knew what they were doing. and of course Amy you as usual was brilliant. the way that you chated and helped them out. bye ❤❤❤
Great video as always Amy and great to see how simple it is to change rubber tracks, the adjustment system sounds great all the machines I've worked on have had metal tracks but they have all been bigger machines and with grease pumped adjusters and oh the mess. On a lighter note it's the first time I've seen Dipper actually getting up and down off the machine, I wasn't sure if he could do it himself with his little legs but obviously he can and quick when you play video in high speed 😂😂
That’s some great upgrades done Amy thanks for taking us around
Good video again. I've got a Classic Tractor Magazine from 2011 with a article about Argyll Engineering and Landini tractors.
Ohh that wasn’t yesterday, how interesting😁
THANK YOU FOR SHARING THIS WAS VERY INTERESTING BRENDAN BOURKE
Thank you 😊
Hi Amy great video as usual thanks. It's testament to your maintenance of the machine how good it looks. Even the fitters were saying how he could tell it had been well greased. Pat yourselves on the back you have kept the machine in excellent order. Look after your machines and they will look after you my old boss used to say. The track adjustment system is awesome that saves some time thanks again for sharing the video on a school night 😅 take care and stay safe 👍 😊.
Interesting video far less painful than steel tracks to fit , they don't bite fingers . Stay safe and healthy xx
Very good video on the tracts
Another terrific video.❤❤❤❤
Camso track you nead , super smooth 👍
I mean 3500 hours out of the last. I don’t think we need to be looking for another brand 😅
@@the_digger_girl from experience if you nead any try the cameo track think dig bits sell it , much smoother tracking no vibration , it’s like it’s got a continuous link no gaps ! 👍
Great video the guys from argyle made that look so easy your right support your local dealer especially if they have good on field service. Thank you for posting 😀👍
Another nice video, thank you Amy😊
The hydraulic tensioners are a nice touch. I _get_ the grease-filled ones, but those seem antiquated in comparison.
Great job Amy bet machine goes better now great vlog again
Thank m you 😊😊
Mighty vlog...great to see the work behind the scene
Good video, nice job done should make a big difference now.
Interesting vid, thanks Amy.
Good video as always keep doing them thanks
Another great video Amy keep up the great content. Couldn’t believe how well you were looking in your short video.❤
Looking good 👌. Those tracks were definitely ready for changing I think I'd have taken the takeuchi to the Kubota to change the tracks nothing better than a gripper for putting tracks on
They really were needing changed!😊
First glass job done look's lot better now with them on go any were now .
Automatic track tensioner omg heaven I've done steel tracks where your looking for the king pin usually the gas bottles are involved heating up the king to hammer it out lol.
With the amount of abuse the tracks must take going on off the truck different sites you have done well there normally hanging to bits by now lol another good vid keep them coming at the end it looks like a new machine 🙂👍
Good job Amy, new boots . Posh or what lol. All the best 👍👍
Good videos love woching them
Glad you like them!😊
Easy when you know how😊
Another great video Amy. I would have done the same and got my money's worth out of the tracks lol. Can't wait for Sunday's episode
I can't believe you put new tracks on a 4000 hour machine and did not replace the drive sprockets
Your Dad likes to get his money's worth out of his equipment by the looks of those old tracks
Yes he's Scottish they have very deep pockets 😂
You can get away with it when you look after your equipment 😁
A quick nod to Bill Shankly " Great Team "
I’m on 4500 on Doosan rubber tracks 😮
🙌🏼🙌🏼
I hope you got a nice slice of cake and a cup of coffee for the guys to sort it out. They'd master work really hard on that it looked like.😅😅😅😅😊😊😊😊😊
Deffo had ur moneys worth out of them. Pays to get genuine in my opinion 👍
It's about time you had a proper machine (takeuchi) on here instead of them kubota's 😂
This machine has made many appearances 😅
Just like having a new pair of shoes 😀😂
Wee Dipper is just a cutie 🥰.
He’s trouble!😅
As smaller excavators go Takeuchi over kubota any day 👍plus I have had idiots get concrete with metal in it stuck between sprocket and track frame when blading crush and run material and keep going until track goes bang 😤
No cold brews 🍺 for the boys after changing your tracks ( shame)😅
Not when we are the middle of no where 😂
@@the_digger_girl where’s your cooler 🥶
Go on, tell us what they cost. Roughly
I don’t ask you how much your shopping is do I?😅😅
Michael Cusack Smith yes
💐👍🙂
Girl, you must not be a good operator. You should have put that track on with the bucket. Made them work their asses off lol😂
2 things wouldnt have been easier to take a grinder and cut the old tracks off and secondly is there a reason why if your dad loves that brand you havent bought anymore of them. Not critising just curious
Ach it’s probably just as easy this way😊 we’ve got a good variety of machines just now and we are happy with all of them😊
Always hang on to the old ones might be a day when they will take you out of a fix even though they might only last for a day or so
You have to get the idler back the easiest way to o do it is jam something on the track and run it round the sprocket cutting it off would mean pushing it back with the back of the bucket and tracks are surprisingly tough
Great content Amy hope your well can you give Tiffany a shout out on Friday please it’s he 7th birthday thanks in advance
first
Good videos love woching them
Thank you 😊