Thanks for doing the in depth video. The All Thingz UTV instructions are not what they should be. This allowed me to use your tutorial and throw that stuff in the trash where it belongs.
@@terryhatfieldmin You should be saying "You're Welcome", hahahahaha. You do some great stuff on your channel, and while I will do different things, I still enjoy the heck out of watching all the products you select, why you choose them, and the processess you go through to get them installed. Dig your channel.
Got it done today....4 hours? I'd like to see it. Super happy with the outcome. Massive thanks to you, Terry. Your video made it all possible. Thanks, again. This is an awesome reference for anyone who is going to do this. The only thing I might add is shrink wrapping the solder connections....but who am I to judge!
You should have been a teacher! Great job on your video as usual!👍 The relocation kit looks awesome! I don’t know what the hell honda was thinking when they put the cluster where they did, it wouldn’t even be so bad if they would have aimed it a little bit towards the driver but either way it shouldn’t be where it is! Yours looks great! It looks like it is where it’s supposed to be now because it is!😁👍👍
Thank you! I enjoy doing the videos.And I agree on Honda missing the mark with the cluster placement. Rode the talon today and it's a million times better on the steering column where it should be.
That came out very nice. That's the best looking kit I've seen so far. All of the other gauge relocation kits for the talon I've seen looked unfinished in my opinion. Lookin good Terry.
Thanks for the video Terry, Paul better gear up, I believe the orders will start coming in from your video! Think I’ll order when I get back to the states!👍
@@djbunkerking1 Thanks. I'm not sure if Paul wanted this extra work or not but I did ok doing the video with him before I did it. Hopefully he's not overwhelmed.
THAT is where it's supposed to be! What was Honda thinking about putting in the center???? It seems every owner and others too comment about the bad idea of in the middle. Looks great.
Another Quality video Terry. I really like this relocation kit. I do have a question though. Does the steering wheel still keep all of the tilt adjustment to the highest raised position? Im a bigger guy and usually ride with the wheel all the way up.
Yes it does. The only issue that anyone has had is with the Super ATV flip windshield. The pod will contact that lower windshield and limit the upward movement a little. Full range of movement on my Honda half.
Great video as always. Definitely a cleaner looking setup compared to the others. Does it twist or move around at all being that it's only held on by the 1 screw?
Your video does a great job showing and explaining how this kit looks and works. You talk about the guy that made the kit as being named Paul and the guy on honda sxs forum name is Terry. Is Terry's kit the same? If not would have contact info for Paul as I am very interested in purchasing this kit.
Thanks. Paul was originally making kits when I bought mine. Pretty much identical to the kits being sold on the forum now but it is a different person.
I cant find any pictures on how it works with the live valve? I would need to see the icons behind this cluster. Is there an option you would recommend that allows you to see it?
@@terryhatfieldmin I followed that link earlier but it doesn’t look readily available. I thought perhaps you still had your original source available. Thanks for the quick response.
@@tclems Sadly, Paul is not going to produce any more. As far as I know the newer kit is available. If you are not already a member, you'll need to join the hondasxs.com forum to see that post. Tons of great info on that forum anyway.
@@terryhatfieldmin didn’t watch all the way through yet sorry! Some where saying no modifications needed done and othered were saying there’s a harness you can buy I’ll sit and watch this completely now
@@DirtTrailAdventures No prob. It is a very simple extension of a couple of wires. I know there were some harnesses available but no need to buy anything really.
There is a link in the show notes to a thread on the Hondasxs.com forum. Going to that thread is the only way to order. You'll have to join the forum if you are not already a member.
Thanks for doing the in depth video. The All Thingz UTV instructions are not what they should be. This allowed me to use your tutorial and throw that stuff in the trash where it belongs.
Thanks for watching! Glad the video was helpful.
@@terryhatfieldmin You should be saying "You're Welcome", hahahahaha. You do some great stuff on your channel, and while I will do different things, I still enjoy the heck out of watching all the products you select, why you choose them, and the processess you go through to get them installed. Dig your channel.
Got it done today....4 hours? I'd like to see it. Super happy with the outcome. Massive thanks to you, Terry. Your video made it all possible. Thanks, again. This is an awesome reference for anyone who is going to do this. The only thing I might add is shrink wrapping the solder connections....but who am I to judge!
You should have been a teacher! Great job on your video as usual!👍 The relocation kit looks awesome! I don’t know what the hell honda was thinking when they put the cluster where they did, it wouldn’t even be so bad if they would have aimed it a little bit towards the driver but either way it shouldn’t be where it is! Yours looks great! It looks like it is where it’s supposed to be now because it is!😁👍👍
Thank you! I enjoy doing the videos.And I agree on Honda missing the mark with the cluster placement. Rode the talon today and it's a million times better on the steering column where it should be.
Thanks for the video Terry. It took me about 4 hours to install. I had never soldered before and your tips for that was very useful. Thank you
Thanks for the comments Casey! So glad that the video was helpful.
Finally some detailed those darn clips and what actually releases them 😆 TY Dude!
You are very welcome. Just trying to help everyone keep their sanity. :)
That came out very nice. That's the best looking kit I've seen so far. All of the other gauge relocation kits for the talon I've seen looked unfinished in my opinion. Lookin good Terry.
Thanks. Paul definitely hit it out if the park with this kit.
Thanks for the video Terry, Paul better gear up, I believe the orders will start coming in from your video! Think I’ll order when I get back to the states!👍
Thank you Overton. I warned him. :) It is a very nice kit for sure.
He's at 41 likes on the post now lol. Including myself!! Thanks for the vid!
@@djbunkerking1 Thanks. I'm not sure if Paul wanted this extra work or not but I did ok doing the video with him before I did it. Hopefully he's not overwhelmed.
THAT is where it's supposed to be! What was Honda thinking about putting in the center???? It seems every owner and others too comment about the bad idea of in the middle. Looks great.
Thanks and I completely agree. No clue why they put it in the center of the dash.
Great job Terry that looks awesome thanks so much for taking the time to film and explain everything. Keep up the great work.👍❤️
Thanks Danny!
Great video Terry - Was wondering if you had some info on those flappy paddles you have installed. Those things look mean!
Thanks Allen! They re from Horizon Off road. Here's the video. Links in the show notes. th-cam.com/video/pCK57YWSfzM/w-d-xo.html
Another Quality video Terry. I really like this relocation kit. I do have a question though. Does the steering wheel still keep all of the tilt adjustment to the highest raised position? Im a bigger guy and usually ride with the wheel all the way up.
Yes it does. The only issue that anyone has had is with the Super ATV flip windshield. The pod will contact that lower windshield and limit the upward movement a little. Full range of movement on my Honda half.
Great video as always. Definitely a cleaner looking setup compared to the others. Does it twist or move around at all being that it's only held on by the 1 screw?
It does not. The printed boss is a tight fit in the cover on the column. Seems quite solid. Paul did a lot of beta testing before he released it.
Long term issuers ? Seems like plastic would break easily.
Had zero issues Shannon. No clue what these were printed with but it seems plenty tough.
Your video does a great job showing and explaining how this kit looks and works. You talk about the guy that made the kit as being named Paul and the guy on honda sxs forum name is Terry. Is Terry's kit the same? If not would have contact info for Paul as I am very interested in purchasing this kit.
Thanks. Paul was originally making kits when I bought mine. Pretty much identical to the kits being sold on the forum now but it is a different person.
nice job!
Thank you Tony!
So clean!!!
Yes it is!
Thanx for the video !! will he be making any in the future ??
Not that I know of.
I cant find any pictures on how it works with the live valve? I would need to see the icons behind this cluster. Is there an option you would recommend that allows you to see it?
The dash numbers looked washed out at that angle. Not in your video, but in real life. Great video btw.
Very good video!!thank you
Thanks for watching! Glad the video was helpful.
I would assume one cannot see the LiveValve status lights? On the LiveValve models, there is a small dash where the "Talon" badge is on the dash
He has a live valve plate for the center of the dash that moves those indicators to where the cluster was.
Here's a link to a photo of the live valve plate. live.staticflickr.com/65535/50330134898_7aa92e0caf_b.jpg
Seems to me this would be much easier if they made a gauge cluster jumper cable that just plugged in.
Hi Terry. Looks like this POD is no longer available, any suggestions for alternatives?
There is a new link in the show notes.
@@terryhatfieldmin I followed that link earlier but it doesn’t look readily available. I thought perhaps you still had your original source available. Thanks for the quick response.
@@tclems Sadly, Paul is not going to produce any more. As far as I know the newer kit is available. If you are not already a member, you'll need to join the hondasxs.com forum to see that post. Tons of great info on that forum anyway.
What are those paddle shifter replacements?
They are from Horizon Off Road. Here's the video. Very cool pieces. th-cam.com/video/pCK57YWSfzM/w-d-xo.html
Do you know why Paul is not taking orders? will he in the future?
It takes days for him to print a single kit and he was flooded with orders after I shot the video. No clue if he will try it later or not.
@@terryhatfieldmin Is it possible for him to upload the design to thingverse so that we can make the bracket ourselves?
Very nice
🏆🏆🏆🤗🙏
Thanks!
link to order this kit please
Hi Scott. The link and the instructions are in the video notes.
Any way to get just the harness extension? I 3D printed my own relocation just need wires
There's no extension. Just a matter of simple modification to the existing harness. I show the procedure in the video.
@@terryhatfieldmin didn’t watch all the way through yet sorry! Some where saying no modifications needed done and othered were saying there’s a harness you can buy I’ll sit and watch this completely now
@@DirtTrailAdventures No prob. It is a very simple extension of a couple of wires. I know there were some harnesses available but no need to buy anything really.
@@terryhatfieldmin Do you know what wire gauge the brown and green wires are by chance? Thanks
@@Schpariel I don't remember but I'm pretty sure they are 18 or 20 gauge.
Has anyone made a relocation kit for a live valve that still leaves room for 6 rocker switches in the original location?
Not that I know of.
What kind of material is he 3D printing with? I know a lot of the 3d filament doesn't hold up well with long term exposure to sunlight.
No clue. Know nothing of the process.
How does a person go about ordering
There is a link in the show notes to a thread on the Hondasxs.com forum. Going to that thread is the only way to order. You'll have to join the forum if you are not already a member.
how can i get information on ordering this kit?
The information on ordering is in the show notes. There is a long waiting list.
@@terryhatfieldmin I’m on the forum and it’s not open to further replies or messaging him.
@@stalling31a Had not seen that but apparently Paul is only doing 100 kits.
Darn I like his design over the other ones out there... and ur video is GREAT!!!
@@stalling31a It's a bummer for sure. I know Paul was totally swamped after I made the video. I feel kinda bad about the whole thing actually.