UP CLOSE VIDEO (POV) Dodge 392 Challenger Wrap. How To Vinyl Wrap A Hood / Bonnet With Hood Scoop

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ต.ค. 2024
  • Wrapping the hood on a Dodge Challenger
    Subscribe to our mailing list at www.ckwrapstor...
    Register for certified workshops here
    www.vvividhq.c...
    Flexible Magnetic Tape Measure Here
    amzn.to/2ORwKdk
    Get The Squeegee Here
    amzn.to/2NZfy5s
    Get 3m Knifeless Tape here amzn.to/2K7H69J
    Get my heat gun here from Amazon amzn.to/2MpqJ6C
    Get my magnets here from Amazon amzn.to/2y4MSUM
    Get my knife here from Amazon amzn.to/2LNufqm
    Get my wrap gloves here amzn.to/2MqO07Y
    Get Vvivid Shield Guard here amzn.to/2MmMOm4
    Get Vvivid air release tool here amzn.to/2MgAseq
    Get Monkey Strip felt buffers here 5 pack amzn.to/2JNXbkC
    Get Monkey Strip felt buffers here 50 pack amzn.to/2JztSTJ

ความคิดเห็น • 79

  • @rjb77
    @rjb77 6 ปีที่แล้ว +16

    I have to say, I think your wife/camera operator does a great job staying out of your way AND getting the shot. Well done, both of you!

  • @winningside1
    @winningside1 6 ปีที่แล้ว +10

    I know you don’t have to show us how to vinyl wrap the car but I appreciate you taking the time to do so.

  • @navidmt021
    @navidmt021 6 ปีที่แล้ว

    Lessons you give out is much more useful than any other Math or Physics lessons in our lives!

  • @aaronmiller9537
    @aaronmiller9537 5 ปีที่แล้ว

    Massive props to the woman behind the camera. You’re a trooper and make this possible. Many thanks

  • @playingcardart
    @playingcardart 4 ปีที่แล้ว +2

    I have a 2019 dodge challenger. I've watched this about a dozen times and am going to give it a shot. Wish me luck! And awesome video btw, thank you for sharing your experience.

    • @MandyReyesDesigns
      @MandyReyesDesigns 2 ปีที่แล้ว

      How did the wrap work out for you? I am going to try and wrap mine tomorrow, also 2019

    • @APeopleP3rson
      @APeopleP3rson 2 หลายเดือนก่อน

      Someone is going to ask every 2 years until you answer. I'd like to hear how it turned out too.

  • @LurkMoar101
    @LurkMoar101 6 ปีที่แล้ว +7

    "A hood should only take you 15 to 20 minutes"
    Me - takes almost 4 hours to wrap an SS hood in carbon fibre =\
    Awesome camera work again Mrs K, makes understanding things so much easier. Ive learned more from the last three videos than from the last three years.

    • @guillermohernandez8027
      @guillermohernandez8027 6 ปีที่แล้ว +1

      LurkMoar101 lol same i took like 2 hours lol

    • @HellCatBravo707
      @HellCatBravo707 3 ปีที่แล้ว +1

      oh yeah and he made a video while doing it with instructional commentary LOL

  • @tflnorthamerica4585
    @tflnorthamerica4585 ปีที่แล้ว

    I agree, also I have covering full size and model aircraft with fabric for years- you sir are an Artist!

  • @TazRisGifted
    @TazRisGifted 6 ปีที่แล้ว

    YOU ARE A MAGICIAN CK UNBELIEVABLE HOW EASY IT LOOKED FOR YOU TO WRAP INTO THAT RECESS! the hood already looks intimidating enough but you are a master at your craft. hope to be like you one day boss!

  • @navy_vet493
    @navy_vet493 6 ปีที่แล้ว

    Man I have no intentions of ever wrapping anything but I cant get enough of watching your videos....kind of like popping bubble wrap

  • @eduardogarza7694
    @eduardogarza7694 4 ปีที่แล้ว

    Thanks for taking the time to show us how to wrap. You make it look easy so i've decided I'm gonna try it on my Trans Am. lol good luck to me!

  • @slowpokecivic
    @slowpokecivic 6 ปีที่แล้ว +3

    really digging the new intro...thanks for always sharing

  • @datdaytona9174
    @datdaytona9174 6 ปีที่แล้ว +4

    So glad i turned on my notifications for this

    • @CKWraps
      @CKWraps  6 ปีที่แล้ว +2

      +Dat Daytona they should always be on for my channel lol

  • @burneymennuna6476
    @burneymennuna6476 3 ปีที่แล้ว

    Awesome work brother

  • @NOLJ
    @NOLJ ปีที่แล้ว

    You make it look so easy, i hate myself for not being able to do it that easily

  • @KantstandlamGarage
    @KantstandlamGarage 6 ปีที่แล้ว

    You’ve definitely gotten much better and efficient from last year being in Miami bro. Keep at it!

  • @orestispappas1613
    @orestispappas1613 3 ปีที่แล้ว

    Αmazing how you do it with so much fingers .....great !

  • @dropem5256
    @dropem5256 6 ปีที่แล้ว

    Thanks!!! Watched your video and used all your little tips here and there and I got my wrap done last night.
    Once again
    Thanks for your knowledge. 👍🏼👍🏼

  • @filomartinez247
    @filomartinez247 5 ปีที่แล้ว +1

    awesome videos, am a true fan of yours, and do appreciate your tips, your a picaso bro, thanks keep up great work.

  • @adrianyflores8932
    @adrianyflores8932 6 ปีที่แล้ว +2

    Awsome hardly used d heat gun 👍👍👍👍👍👍👍👍👍👍

  • @justin77782
    @justin77782 3 ปีที่แล้ว

    Goddam that’s 1 good job 👏 my applause too you sir! You don’t even know how much you helped me out with this video thank you 😎

  • @CalicoRiot
    @CalicoRiot 5 ปีที่แล้ว

    Excellent fit and finish. Very helpful, thank you.

  • @MichaelZorn2
    @MichaelZorn2 2 ปีที่แล้ว

    I also have some rock chips in my hood. When you mentioned that I was excited but I never got to see that finished part or you didnt touch back on that. I feel like its gonna be so noticeable. I think I'm going to hafta spot pint or fill or primer or something.

  • @guillermohernandez8027
    @guillermohernandez8027 6 ปีที่แล้ว +1

    Another awesome video! Very helpful

  • @sacredlux6099
    @sacredlux6099 6 ปีที่แล้ว

    I like your term "lock it in". You better trade mark it.

  • @Official_Sketto
    @Official_Sketto 6 ปีที่แล้ว

    You are the bob ross of car wraps Lol

  • @TonyBone46
    @TonyBone46 6 ปีที่แล้ว

    I stripped out my hellcat last year (first time wrapping) and turned-out pretty good, but the hardest part was cutting out the scoop, but you just cleared that up for me! Thanks

  • @marksolomon6089
    @marksolomon6089 6 ปีที่แล้ว

    Great video man.im doing my car next week so this video really helps for me.1st time doing it my self so hopefully I don't messed it up lol

  • @JamesWilson-du4xt
    @JamesWilson-du4xt 6 ปีที่แล้ว

    i enjoy your vids and i like these instructional videos i plan on doing my own eventually, the wrap is sorta pricey for a whole car. so i guess im going to buy it in sections for each panel till i have it all and knock it out in a day.

  • @runescpaeownzz99
    @runescpaeownzz99 6 ปีที่แล้ว

    Appreciate the videos and excellent explanation !

  • @nemanjaigic9664
    @nemanjaigic9664 6 ปีที่แล้ว

    You're The Best!

  • @pierreskyline1251
    @pierreskyline1251 6 ปีที่แล้ว

    Looks so easy :) nice job

  • @lavdimb2474
    @lavdimb2474 6 ปีที่แล้ว

    Good job!!

  • @Jameel-m7f
    @Jameel-m7f 7 หลายเดือนก่อน

    very very nice ❤

  • @bigmoo_da_creoleking3531
    @bigmoo_da_creoleking3531 3 ปีที่แล้ว

    🔥🔥

  • @bonjimmi9544
    @bonjimmi9544 6 ปีที่แล้ว +1

    Is it me.... or does anyone else get nervous when he is working the vinyl with his fingers with the blade in his hand... I have to put the blade down... i would nick the vinyl everytime if I did that..... goes to show the experience he has doing this... He can probably wrap in his sleep.... another great video.

  • @YungPro_custom
    @YungPro_custom 3 ปีที่แล้ว

    How would you wrap the SRT spoiler on a charger ? If you haven’t put a video up about that already.

  • @ekslife6928
    @ekslife6928 6 ปีที่แล้ว

    Great vids. Got another Sub here 👍

  • @3rdaxis649
    @3rdaxis649 6 ปีที่แล้ว

    Looks like a breeze. Wish window int was so forgiving lol.

  • @Andryhomsticker89
    @Andryhomsticker89 6 ปีที่แล้ว

    Sangat bermanfaat.. keren

  • @marshallreeves7119
    @marshallreeves7119 4 ปีที่แล้ว

    Any tricks for the washer nozzles in a challenger hood?

  • @luke2187L
    @luke2187L 6 ปีที่แล้ว +1

    I want wrap my 2015 charger, if the challenger takes 75 ftoeet of wrap how much will the charger take ?

  • @scottgillig908
    @scottgillig908 5 ปีที่แล้ว

    Christian, question, please. When vinyl is being made, there's an intense concern when making new batches of vinyl concerning color pigment. I know that vinyl is PVC based, which is unusual because in the States, PVC was banned for many years. So, let's say that you're doing the hood, then you find out that you just don't have enough to do the door. So, you're waiting for another roll from the manufacturer to deliver. Is it possible that you could give me a rough percentage of the time where you get a new roll, and you hold it up and there's a big enough difference in the colors that you say, " Nope, can't use that roll, it doesn't match close
    enough ? " The color is actually determined in the compounding process of the chemicals and color pigment. Or, is it very rare that happens at all ? Thanks.
    My best,
    Scott

  • @theTIVANshow
    @theTIVANshow 6 ปีที่แล้ว

    You said you did have enough product when you bought it and had to order more. Is the color between lots pretty close consistent across the product line and or companies that make it ?

  • @upfrontlifestyle1353
    @upfrontlifestyle1353 2 ปีที่แล้ว

    Tried mine today wasted 110 bucks tried for so long and so many things it wouldn’t stick to the corners on the scoop , at all :(

  • @CTP1111
    @CTP1111 6 ปีที่แล้ว

    how do you prevent the bunching or those little fingers you get when you squeegie? my #1 problem yesterday when wrapping my hood, got bunched up on both sies, its a curved hood (aston v8 vantage) not a very big inlay or anything and those little tiny places where film would bunch up against itself in a tiny manner when squeegieing

  • @Outdoorsmanlife88
    @Outdoorsmanlife88 6 ปีที่แล้ว

    I’ve been interested in wrapping my ram 1500. But what’s the longevity of the wrap?

  • @austinbates5007
    @austinbates5007 5 ปีที่แล้ว

    My exact car but a charger and better no more bull shit

  • @dadathome274
    @dadathome274 4 ปีที่แล้ว

    Could you do the Challenger dual rally stripes on my '19 R/T ?

  • @doanius
    @doanius 2 ปีที่แล้ว

    What color red is the Lambo?

  • @blackcat6.2.
    @blackcat6.2. 5 ปีที่แล้ว

    I'm wrapping a charger srt currently and having alot of issue with the stretching and wrinkles on the hood and in general what room temperature are you working in if that matters ?any other tips please and thank you if the right tools matter or what not really would like the best tips I can get thanks guys

  • @Swerve2410
    @Swerve2410 4 ปีที่แล้ว

    What color wrap is this? Grey?

  • @runescpaeownzz99
    @runescpaeownzz99 6 ปีที่แล้ว

    Hey boss, where do you acquire all of your wraps from? What website or store? I’d appreciate response.
    Thanks -Austin.

  • @luke2187L
    @luke2187L 6 ปีที่แล้ว

    I want to wrap my 2015 charger, if the challenger takes 75 feet of wrap how much will the charger take ?

  • @geraldfoster7791
    @geraldfoster7791 5 ปีที่แล้ว

    I’m trying to use the new 3D shadow black 3M wrap. It’s a pain in the ASS. I can’t get it to lay right on the lower part of the hood past the scoop on both sides. Any help?!

  • @beatricethemiata8565
    @beatricethemiata8565 6 ปีที่แล้ว

    how do the edges of the wrap stay adhered to the car??

  • @BigBoss-ps6vk
    @BigBoss-ps6vk 6 ปีที่แล้ว

    What film is this? The orange peel on it it’s brutal

    • @bonjimmi9544
      @bonjimmi9544 6 ปีที่แล้ว

      The orange peel isn't on the film..... its on the factory paint that the vinyl is sticking too..

  • @187stewan
    @187stewan 6 ปีที่แล้ว

    Hey how much wrap do you need to wrap the hood and the spoiler on the truck on a challenger

  • @red_gt_5.025
    @red_gt_5.025 6 ปีที่แล้ว

    How do u keep the swirls out off the wrap from the squeegee?

  • @mrcwoodworks4523
    @mrcwoodworks4523 6 ปีที่แล้ว

    This dude is starting to sound a lot like bob Ross...lol

  • @abelquacoo6590
    @abelquacoo6590 6 ปีที่แล้ว

    Where can I get good quality wraps to buy?

  • @tacticalbarberpewlife2127
    @tacticalbarberpewlife2127 ปีที่แล้ว

    💳

  • @jamescyoungjy
    @jamescyoungjy 6 ปีที่แล้ว

    13 haters I c

  • @codyschuler360
    @codyschuler360 2 ปีที่แล้ว

    Ck needs just take Avery classes lol. His approach is so amateur

  • @luke2187L
    @luke2187L 6 ปีที่แล้ว

    I want to wrap my 2015 charger, if the challenger takes 75 feet of wrap how much will the charger take ?

  • @luke2187L
    @luke2187L 6 ปีที่แล้ว

    I want wrap my 2015 charger, if the challenger takes 75 ftoeet of wrap how much will the charger take ?

    • @CKWraps
      @CKWraps  6 ปีที่แล้ว

      About the same

  • @luke2187L
    @luke2187L 6 ปีที่แล้ว

    I want wrap my 2015 charger, if the challenger takes 75 ftoeet of wrap how much will the charger take ?

    • @CKWraps
      @CKWraps  6 ปีที่แล้ว

      About the same

    • @luke2187L
      @luke2187L 6 ปีที่แล้ว

      CK Wraps cool thanks ...your videos gave me some confidence that I can do it.. Very detailed and informative.

    • @luke2187L
      @luke2187L 6 ปีที่แล้ว

      CK Wraps do you have and videos that list all the tools you use or where to get them ?

    • @programalateshow1750
      @programalateshow1750 3 ปีที่แล้ว

      @@CKWraps what’s the avg cost to do this on a challenger ?