Love the look at this, very impressive. I’ll be in the market for a new machine perhaps in the fall. You’ve inspired me build one for the first time. Fingers crossed ;)
Appreciate your straight forward, easy-to-follow installation guides and reviews of case temps and noise. I wish the Lian Li TL LCD fans weren't so pricey, but they're hard to ignore when they not only look good but also give you useful case info.
Thank you for awesome video. I looked for NZXT H7 FLOW (2024) review because I wanna upgrade to new case, but this build video is even better because u are using same setup as I would like to target.
Like this new design very much. Just want slightly bigger version that has 420 rad support at the top and back connector motherboard support. Maybe also 3x 140 in the bottom.
Fantasic video mate, it was a very helpful case review. I think this will be my next case but its just a shame I'm going to have to change out those front 3 3pin fans for some Noctua's.
Screwing in the Graphics card is not so easy as the screw driver is on a slight angle. This needs a slight redesign by NZXT. I've just order the Corsair PC 65pc DIY Precision Toolkit and Mini Electric Screwdriver Set, 70 in 1 by Soleilwear, both are magnetic which will make PC Builds much easier. I kept dropping screws or was difficult at times.
I like my 2022 H7 Flow better. Don't like that dead space below the gpu. I would like the front fans mounted inside the mount and still support a 360 AIO on top that way we can see the sides of our fans if we use rgb or infinity mirror ones. Same with the bottom an option to mount them on top of the hole and not flush.
Dead space is probably for water cooling, at could be that 5 series video card will be water cooled, but this new version does not have dust filters... why did they decide not to have them is a mystery, will uave to look for another case with same spec but filters included...
@@imammumbata194 the holes in the panels are too small to have filters it would restrict airflow. It's either small holes acting as a dust filter at the same time or larger holes with a seperate dust filter.
Love how in depth your step by step guides are
Thanks
Love the look at this, very impressive.
I’ll be in the market for a new machine perhaps in the fall. You’ve inspired me build one for the first time.
Fingers crossed ;)
how was it?
Appreciate your straight forward, easy-to-follow installation guides and reviews of case temps and noise. I wish the Lian Li TL LCD fans weren't so pricey, but they're hard to ignore when they not only look good but also give you useful case info.
Nice setup and step by step installing PC components into the Case. You deserved the Sub and wish you the best.
Thank you for awesome video. I looked for NZXT H7 FLOW (2024) review because I wanna upgrade to new case, but this build video is even better because u are using same setup as I would like to target.
Great review once again Chris!
Glad you enjoyed it
Nice high quality video, good angles. I can actually see how the case looks from various points
*saving this for when I get all my components and the case*
Thank you so much for the video! I was wondering if I could put my own fans in the bottom or not!
Looks pretty good. Agree that it need colour fans at the front.
Getting the same case, ram, and cpu. MOBO is x670 aorus elite ax. Hopefully good boot times and first post. 🙏
love step by step build guides
Like this new design very much. Just want slightly bigger version that has 420 rad support at the top and back connector motherboard support. Maybe also 3x 140 in the bottom.
If it was bigger and looked more in proportion it would look better
Fantasic video mate, it was a very helpful case review. I think this will be my next case but its just a shame I'm going to have to change out those front 3 3pin fans for some Noctua's.
Great job!
Thank you! Cheers!
Great video. That is my dream case
Wow Great Build, I might be building a new PC soon probably around $4-5K budget in mind.
Thanks for the well made video :)
Can i use this NZXT Kraken Elite 360 RGB 2024 - AIO CPU Liquid Cooler instead and will it work for the rest of the fan on this system?
Subbed for sure just cuz it's informal
The Space under the GPU must be good for gpu temps
GPU temps were great
Screwing in the Graphics card is not so easy as the screw driver is on a slight angle. This needs a slight redesign by NZXT. I've just order the Corsair PC 65pc DIY Precision Toolkit and Mini Electric Screwdriver Set, 70 in 1 by Soleilwear, both are magnetic which will make PC Builds much easier. I kept dropping screws or was difficult at times.
after your detail explanations subscribe right away!!!
I like my 2022 H7 Flow better. Don't like that dead space below the gpu. I would like the front fans mounted inside the mount and still support a 360 AIO on top that way we can see the sides of our fans if we use rgb or infinity mirror ones. Same with the bottom an option to mount them on top of the hole and not flush.
I never build in the old one
Dead space is probably for water cooling, at could be that 5 series video card will be water cooled, but this new version does not have dust filters... why did they decide not to have them is a mystery, will uave to look for another case with same spec but filters included...
@@imammumbata194 the holes in the panels are too small to have filters it would restrict airflow. It's either small holes acting as a dust filter at the same time or larger holes with a seperate dust filter.
Any problems with installing the bottom-mounted screws for the fans? As the end connector pushes the end fan slightly to the left? Thanks
Looks pretty good. With a little less expensive fans there would be room to almost buy a RTX 4090 for the same price range tho.
41 DB at idle is very noisy. How far did u keep the mike from the case?
Do you have a graphic card holder? Seems no place to install...
Can I keep the magnetic screen off when I install the CPU cooler?
No dust filters to be seen.. Ouch. And that big mesh on the whole back panel :/// so many holes everywhere for dust
NZXT cases are dust monsters. Good airflow but zero filtration.
Fractal il better
Dust filters and removable top bracket would be nice
great guide as always, not a fan of this case, that bottom wall is too much
Spiderman theme to it
Missed an idea there. Could have used the screens
Really amazing content. I want to talk with you.
0722 Caterina Vista
It's so sad to notice that these step by step guides are getting shorter and shorter
Still all the same info, just better editing and referencing content already recorded
borring case.. and why that big mesh from side...